Jump to content

Cannot start the server 1.17.1


Piece of Angel

Recommended Posts

Really appreciate your advice. The error stayed the same, but I've tried to log in as admin and run the .bat, and it worked.
Previously I was using non-admin account, just running the bat file under admin credentials. 

After installation finished, switching back to account still didn't affect the error. It seems to run the server one has to log in as admin account.

Link to comment
Share on other sites

Sorry, forgot my password immediately after registering (I'm bad lol). Now got recovered.

On topic: What do you mean I should not run it as admin? Thing is - for me it only works when I run as admin 😅

How did I achieve? I did run both as admin and not as admin on non-admin account. Server starts only when I log in under admin account itself. Otherwise - i get those error messages
 Run as non-admin under non-admin account and Run as admin under non-admin account (but admin credentials)

Link to comment
Share on other sites

You installed the server to your system directory, this is a MASSIVE no no

  • Thanks 1

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Please provide debug.log

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Please use one of the pastes sites in my signature below for providing logs, Google Docs is meant for documents, not raw text files and the extra formatting makes logs unreadable

  • Thanks 1

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

@DaemonUmbra, Good day again :)

Sorry for the inconvenience! First of all - my sincere thanks for your willingness to help, really-really appreciate it!  
I'm very new to this all minecraft thematic, as well to the server topics, therefore still eager (but maybe sometimes also too hasty) to learn. Hope helping me does not bother you very much, sir! 

Here are the logs: => Bonk! (hastebin)

Link to comment
Share on other sites

Are you sure this is the whole log?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

@DaemonUmbra, I was hoping to re-do it and then it all began..server does not go up anymore, unless I run it under admin account (starts only on 2nd time though. First time - stops with error)
Here are the errors: (unfortunately for some of them i was not able to mark and copy them - command prompt does not allow marking by that time, so only screenshots 😓)

(Screenshots)
Errors that did not end up in the command prompt log 1 
Errors that did not end up in the command prompt log 2
(Logs)
Command prompt log prior to crash
Crash report saved by server
 

All the builds that I was using - had the same mods and no changes to environment were performed.

Couple of words about environment:
Windows Server 2012 Version 6.3 Build 9600 fresh install.
Only thing I've done: installed Java 8, then installed 16, and then uninstalled 8.
After that ran an installation of Forge Server (from official website).
Also did couple of things with Firewall for the port forwarding

 

 

Link to comment
Share on other sites

2 hours ago, diesieben07 said:

Aquaculture is broken. I've created an issue in their repository.

@diesieben07 Thanks a lot! 
Should I try to delete it via admin account and restart server? (I still can run it if I'm admin on a server, and run all commands from console) Or should I keep it as it is? 
(Losing data is not a problem, because a goal is actually to have a clean working server that is running properly)

Also I'm still suspicious that this mod is not the root cause of the problem that prevents me to use /op command properly 🤕

Link to comment
Share on other sites

27 minutes ago, diesieben07 said:

Try without the mod, yes.

@diesieben07, Server did not start, but not a crash though.
Here is the log from command console during start: => Bonk!

Those errors also stay:
Errors that did not end up in the command prompt log 1 
Errors that did not end up in the command prompt log 2

Also I can try to debug running via admin server, and send you the logs, if needed (maybe some health issues can be found there too...🙈)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • Hello everyone, I'm making this post to seek help for my modded block, It's a special block called FrozenBlock supposed to take the place of an old block, then after a set amount of ticks, it's supposed to revert its Block State, Entity, data... to the old block like this :  The problem I have is that the system breaks when handling multi blocks (I tried some fix but none of them worked) :  The bug I have identified is that the function "setOldBlockFields" in the item's "setFrozenBlock" function gets called once for the 1st block of multiblock getting frozen (as it should), but gets called a second time BEFORE creating the first FrozenBlock with the data of the 1st block, hence giving the same data to the two FrozenBlock :   Old Block Fields set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=head] BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@73681674 BlockEntityData : id:"minecraft:bed",x:3,y:-60,z:-6} Old Block Fields set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=foot] BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@6d1aa3da BlockEntityData : {id:"minecraft:bed",x:2,y:-60,z:-6} Frozen Block Entity set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=foot] BlockPos{x=3, y=-60, z=-6} BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@6d1aa3da BlockEntityData : {id:"minecraft:bed",x:2,y:-60,z:-6} Frozen Block Entity set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=foot] BlockPos{x=2, y=-60, z=-6} BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@6d1aa3da BlockEntityData : {id:"minecraft:bed",x:2,y:-60,z:-6} here is the code inside my custom "freeze" item :    @Override     public @NotNull InteractionResult useOn(@NotNull UseOnContext pContext) {         if (!pContext.getLevel().isClientSide() && pContext.getHand() == InteractionHand.MAIN_HAND) {             BlockPos blockPos = pContext.getClickedPos();             BlockPos secondBlockPos = getMultiblockPos(blockPos, pContext.getLevel().getBlockState(blockPos));             if (secondBlockPos != null) {                 createFrozenBlock(pContext, secondBlockPos);             }             createFrozenBlock(pContext, blockPos);             return InteractionResult.SUCCESS;         }         return super.useOn(pContext);     }     public static void createFrozenBlock(UseOnContext pContext, BlockPos blockPos) {         BlockState oldState = pContext.getLevel().getBlockState(blockPos);         BlockEntity oldBlockEntity = oldState.hasBlockEntity() ? pContext.getLevel().getBlockEntity(blockPos) : null;         CompoundTag oldBlockEntityData = oldState.hasBlockEntity() ? oldBlockEntity.serializeNBT() : null;         if (oldBlockEntity != null) {             pContext.getLevel().removeBlockEntity(blockPos);         }         BlockState FrozenBlock = setFrozenBlock(oldState, oldBlockEntity, oldBlockEntityData);         pContext.getLevel().setBlockAndUpdate(blockPos, FrozenBlock);     }     public static BlockState setFrozenBlock(BlockState blockState, @Nullable BlockEntity blockEntity, @Nullable CompoundTag blockEntityData) {         BlockState FrozenBlock = BlockRegister.FROZEN_BLOCK.get().defaultBlockState();         ((FrozenBlock) FrozenBlock.getBlock()).setOldBlockFields(blockState, blockEntity, blockEntityData);         return FrozenBlock;     }  
    • It is an issue with quark - update it to this build: https://www.curseforge.com/minecraft/mc-mods/quark/files/3642325
    • Remove Instant Massive Structures Mod from your server     Add new crash-reports with sites like https://paste.ee/  
    • Update your drivers: https://www.amd.com/en/support/graphics/amd-radeon-r9-series/amd-radeon-r9-200-series/amd-radeon-r9-280x
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.