Jump to content

[1.19.2] Align Jigsaw structure to hill walls


Skyriis

Recommended Posts

Generally, this would be the responsibility of the world carver, but there are ways to get around it. You could do something where you check if the entire placement area is within blocks and the opening to the cave is touching some other air block. In general though, you would need to program most of your logic from scratch since I don't believe Minecraft does anything like this itself. The closest I can recommend as an example would probably be the GeodeFeature, though I don't think that's gonna get you anywhere to close to what you would need.

Link to comment
Share on other sites

1 hour ago, Skyriis said:

How would i check that area?

You should have access within the structure to some form of the level that allows you to read the blocks in the area. As for checking the entire area, it depends on how much you want to check or optimize. In general, you could probably get away with only checking the borders. If you really don't care how much spawns outside a mountain, you just need to check the corners.

Link to comment
Share on other sites

So, after a quick read up, you're better of making your structure a feature to generate. The only terrain adaption which makes sense for you is the bury one which would fail for air. You could attempt to set the `project_start_to_heightmap` field to the world surface and see it that gives a better chance for it to spawn connected to the air. Otherwise, you would have to generate the pieces manually similar to how buried treasure works if you wanted to keep a structure or a custom feature which could then correctly check the sides to see if it is touching air.

Link to comment
Share on other sites

2 hours ago, Skyriis said:

how would i make a jigsaw structure a feature? or... how would i make a feature 1.19 anyway 

How would i generate the nbt files (like a jigsaw structure would do it) and then check the size and blocks around?

This tutorial might be helpful to you:

https://misode.github.io/guides/adding-custom-structures/

As for saving the NBT file for the structure itself, you can just use the structure blocks in game to save your structure in the generated folder of your world map.

Link to comment
Share on other sites

Apologies for the poor explanation on my part. If you want to use a feature, you can't easily use a template. You would need to get it through the StructureTemplateManager through the ServerLevel through the WorldGenLevel, load the data, and then generate it. TelepathicGrunt does have a tutorial on creating a custom structure through which you could use to add an extra spawn check if there is air around you. Though, imo, you're still better off with a feature since you should be able to more safely check whether you can replace the block there.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

alright so... i got this as my feature:

@Override
    public boolean place(FeaturePlaceContext<NoneFeatureConfiguration> pContext) {
        BlockPos origin = pContext.origin();
        ServerLevel level = pContext.level().getLevel();
        StructureTemplateManager templateManager = level.getStructureManager();
        // Get structure parts
        StructureTemplate entranceTemplate = templateManager.getOrCreate(ENTRANCE);
        StructureTemplate understairTemplate = templateManager.getOrCreate(UNDERSTAIR);
        StructureTemplate roomTemplate = templateManager.getOrCreate(ROOMS[level.getRandom().nextIntBetweenInclusive(0, ROOMS.length - 1)]);


        Vec3i entranceSize = entranceTemplate.getSize();
        // Check top and bottom entrance
        for (int i = -1; i < entranceSize.getX(); i++) {
            BlockState bottomState = level.getBlockState(origin.offset(i, -1, 0));
            BlockState topState = level.getBlockState(origin.offset(i, entranceSize.getY(), 0));
            // Exit if air
            if (bottomState.isAir() || topState.isAir()) return false;
        }

        // check left and right entrance
        for (int i = -1; i < entranceSize.getY(); i++) {
            BlockState leftState = level.getBlockState(origin.offset(-1, i, 0));
            BlockState rightState = level.getBlockState(origin.offset(entranceSize.getX(), i, 0));
            //Exit if air
            if (leftState.isAir() || rightState.isAir()) return false;
        }

        // Ensure air is in front of the cave entrance
        for (int x = 1; x < entranceSize.getX() - 1; x++) {
            for (int y = 1; y < entranceSize.getY() - 1; y++) {
                if (!level.getBlockState(origin.offset(x, y, -1)).isAir()) return false;
            }
        }

        boolean entrancePlaceSuccess = entranceTemplate.placeInWorld(level, origin, origin, new StructurePlaceSettings(), level.getRandom(), 2);

        return false;
    }

and the place method get's invoked (i checked that with a break point and the intellij debugger) problem is that the world gen get's stuck :S When i create a new world it get's stuck here:

image.png

 

Any ideas what cause this?

Link to comment
Share on other sites

alright so i've changed my place method to this:

    @Override
    public boolean place(FeaturePlaceContext<NoneFeatureConfiguration> pContext) {
        BlockPos origin = pContext.origin();
        WorldGenLevel level = pContext.level();
        StructureTemplateManager templateManager = level.getServer().getStructureManager();
        BulkSectionAccess sectionAccess = new BulkSectionAccess(level);
        // Get structure parts
        StructureTemplate entranceTemplate = templateManager.getOrCreate(ENTRANCE);
        StructureTemplate understairTemplate = templateManager.getOrCreate(UNDERSTAIR);
        StructureTemplate roomTemplate = templateManager.getOrCreate(ROOMS[level.getRandom().nextIntBetweenInclusive(0, ROOMS.length - 1)]);

        Vec3i entranceSize = entranceTemplate.getSize();

        // Ensure we can write in the entrance structure area
        for (int x = 0; x < entranceSize.getX(); x++) {
            for (int y = 0; y < entranceSize.getY(); y++) {
                for (int z = 0; z < entranceSize.getZ(); z++) {
                    if (!level.ensureCanWrite(origin.offset(x, y, z))) return false;
                }
            }
        }

        // Check top and bottom (front) is covered
        for (int i = -1; i < entranceSize.getX(); i++) {
            if (safeBlockStateCheck(sectionAccess, origin.offset(i, -1, 0), BlockBehaviour.BlockStateBase::isAir, true)) return false;
            if (safeBlockStateCheck(sectionAccess, origin.offset(i, entranceSize.getY(), 0), BlockBehaviour.BlockStateBase::isAir, true)) return false;
        }

        // check left and right (front) is covered
        for (int i = -1; i < entranceSize.getY(); i++) {
            if (safeBlockStateCheck(sectionAccess, origin.offset(-1, i, 0), BlockBehaviour.BlockStateBase::isAir, true)) return false;
            if (safeBlockStateCheck(sectionAccess, origin.offset(entranceSize.getX(), i, 0), BlockBehaviour.BlockStateBase::isAir, true)) return false;
        }

        // Ensure air is in front of the cave entrance
        for (int x = 2; x < entranceSize.getX() - 2; x++) {
            for (int y = 2; y < entranceSize.getY() - 2; y++) {
                if (safeBlockStateCheck(sectionAccess, origin.offset(x, y, 0), blockState -> !blockState.isAir())) return false;
            }
        }

        boolean entrancePlaceSuccess = entranceTemplate.placeInWorld(level, origin, origin, new StructurePlaceSettings(), level.getRandom(), 2);

        return false;
    }

    private boolean safeBlockStateCheck(BulkSectionAccess sectionAccess, BlockPos pos, Predicate<BlockState> check) {
        return safeBlockStateCheck(sectionAccess, pos, check, false);
    }

    private boolean safeBlockStateCheck(BulkSectionAccess sectionAccess, BlockPos pos, Predicate<BlockState> check, boolean resultWhenInaccessible) {
        LevelChunkSection chunkSection = sectionAccess.getSection(pos);
        // Ensure chunk section exists
        if (chunkSection == null) return resultWhenInaccessible;
        // Get target block state
        BlockState targetState = chunkSection.getBlockState(
            SectionPos.sectionRelative(pos.getX()),
            SectionPos.sectionRelative(pos.getY()),
            SectionPos.sectionRelative(pos.getZ())
        );
        // Return test result
        return check.test(targetState);
    }

and now i'm getting those errors in the first for loop (the ensure write thing):

image.png

 

why is that?

Link to comment
Share on other sites

On 2/2/2023 at 8:46 PM, ChampionAsh5357 said:

Generally, this would be the responsibility of the world carver, but there are ways to get around it. You could do something where you check if the entire placement area is within blocks and the opening to the cave is touching some other air block. In general though, you would need to program most of your logic from scratch since I don't believe Minecraft does anything like this itself. The closest I can recommend as an example would probably be the GeodeFeature, though I don't think that's gonna get you anywhere to close to what you would need.
 

Thanks, I will try it and if I still face this problem, then I will message you.

Edited by CraigDesir
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.