Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Using Intellij IDEA for Mod-Development with ForgeGradle


Recommended Posts

In cmd or powershell type

javac -version

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Are you sure you have the JDK installed and not just a JRE?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

  • 7 months later...
7 minutes ago, deerangle said:

May I suggest you add the solution to the problem in this thread to the tutorial, as others using IntelliJ might encounter this problem too.

I'm really not sure thats a good solution, I remember reading in a changelog somewhere that FG needs to compile the mod. Stopping gradle from compiling your mod may result in issues.

About Me

Spoiler

My Discord - Cadiboo#8887

My WebsiteCadiboo.github.io

My ModsCadiboo.github.io/projects

My TutorialsCadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Recently Browsing

    No registered users viewing this page.

  • Posts

    • Thanks for the help everybody! I tried this and although the block did register, the fluid just appears as a flat plane you can only see if you break the block under it. I tried debugging it as much as I could but alas I couldn't solve it Here is the code for my "fixed" liquidblock as suggested by Luis_ST: package com.hotmail.majdroaydi.minitech.blocks; import net.minecraft.core.BlockPos; import net.minecraft.core.Direction; import net.minecraft.sounds.SoundEvent; import net.minecraft.tags.FluidTags; import net.minecraft.world.item.ItemStack; import net.minecraft.world.level.BlockGetter; import net.minecraft.world.level.Level; import net.minecraft.world.level.LevelAccessor; import net.minecraft.world.level.block.Block; import net.minecraft.world.level.block.Blocks; import net.minecraft.world.level.block.LiquidBlock; import net.minecraft.world.level.block.state.BlockState; import net.minecraft.world.level.material.FlowingFluid; import net.minecraft.world.level.pathfinder.PathComputationType; import net.minecraft.world.phys.shapes.CollisionContext; import net.minecraft.world.phys.shapes.Shapes; import net.minecraft.world.phys.shapes.VoxelShape; import java.util.Optional; import java.util.function.Supplier; public class ForgeLiquidBlock extends LiquidBlock { public ForgeLiquidBlock(Supplier<? extends FlowingFluid> supplier, Properties properties) { super(supplier, properties); } @Override public VoxelShape getCollisionShape(BlockState p_54760_, BlockGetter p_54761_, BlockPos p_54762_, CollisionContext p_54763_) { return p_54763_.isAbove(STABLE_SHAPE, p_54762_, true) && p_54760_.getValue(LEVEL) == 0 && p_54763_.canStandOnFluid(p_54761_.getFluidState(p_54762_.above()), getFluid()) ? STABLE_SHAPE : Shapes.empty(); } @Override public boolean isPathfindable(BlockState p_54704_, BlockGetter p_54705_, BlockPos p_54706_, PathComputationType p_54707_) { return !getFluid().is(FluidTags.LAVA); } @Override public boolean skipRendering(BlockState p_54716_, BlockState p_54717_, Direction p_54718_) { return p_54717_.getFluidState().getType().isSame(getFluid()); } @Override public void onPlace(BlockState p_54754_, Level p_54755_, BlockPos p_54756_, BlockState p_54757_, boolean p_54758_) { if (this.shouldSpreadLiquid(p_54755_, p_54756_, p_54754_)) { p_54755_.getLiquidTicks().scheduleTick(p_54756_, p_54754_.getFluidState().getType(), getFluid().getTickDelay(p_54755_)); } } @Override public BlockState updateShape(BlockState p_54723_, Direction p_54724_, BlockState p_54725_, LevelAccessor p_54726_, BlockPos p_54727_, BlockPos p_54728_) { if (p_54723_.getFluidState().isSource() || p_54725_.getFluidState().isSource()) { p_54726_.getLiquidTicks().scheduleTick(p_54727_, p_54723_.getFluidState().getType(), getFluid().getTickDelay(p_54726_)); } //return super.updateShape(p_54723_, p_54724_, p_54725_, p_54726_, p_54727_, p_54728_); return p_54723_; // Calling super.updateShape will just call LiquidBlock's updateShape, not what we are looking for! Thankfully, Block.updateShape, simply enough, just returns the first parameter. } @Override public void neighborChanged(BlockState p_54709_, Level p_54710_, BlockPos p_54711_, Block p_54712_, BlockPos p_54713_, boolean p_54714_) { if (this.shouldSpreadLiquid(p_54710_, p_54711_, p_54709_)) { p_54710_.getLiquidTicks().scheduleTick(p_54711_, p_54709_.getFluidState().getType(), getFluid().getTickDelay(p_54710_)); } } private boolean shouldSpreadLiquid(Level p_54697_, BlockPos p_54698_, BlockState p_54699_) { if (getFluid().is(FluidTags.LAVA)) { boolean flag = p_54697_.getBlockState(p_54698_.below()).is(Blocks.SOUL_SOIL); for(Direction direction : POSSIBLE_FLOW_DIRECTIONS) { BlockPos blockpos = p_54698_.relative(direction.getOpposite()); if (p_54697_.getFluidState(blockpos).is(FluidTags.WATER)) { Block block = p_54697_.getFluidState(p_54698_).isSource() ? Blocks.OBSIDIAN : Blocks.COBBLESTONE; p_54697_.setBlockAndUpdate(p_54698_, net.minecraftforge.event.ForgeEventFactory.fireFluidPlaceBlockEvent(p_54697_, p_54698_, p_54698_, block.defaultBlockState())); this.fizz(p_54697_, p_54698_); return false; } if (flag && p_54697_.getBlockState(blockpos).is(Blocks.BLUE_ICE)) { p_54697_.setBlockAndUpdate(p_54698_, net.minecraftforge.event.ForgeEventFactory.fireFluidPlaceBlockEvent(p_54697_, p_54698_, p_54698_, Blocks.BASALT.defaultBlockState())); this.fizz(p_54697_, p_54698_); return false; } } } return true; } private void fizz(LevelAccessor p_54701_, BlockPos p_54702_) { p_54701_.levelEvent(1501, p_54702_, 0); } @Override public ItemStack pickupBlock(LevelAccessor p_153772_, BlockPos p_153773_, BlockState p_153774_) { if (p_153774_.getValue(LEVEL) == 0) { p_153772_.setBlock(p_153773_, Blocks.AIR.defaultBlockState(), 11); return new ItemStack(getFluid().getBucket()); } else { return ItemStack.EMPTY; } } @Override public Optional<SoundEvent> getPickupSound() { return getFluid().getPickupSound(); } } The code for my OilFluid can be found above.
    • Whoops! Sorry, my fault. But yes, a block entity (tile entity in 1.16-) *is* needed for storing data (i.e. furnace). But I think what OP is doing is making an item combiner, which doesn't need one
    • Looking to work with reliable Fabric & Forge developers to produce original mods for use on my YouTube channel! We'll be regularly working together and you'll be given a detailed brief for each commission that outlines exactly what I want. From there, you can give me a price that fits the scope of the project and we can get to work :thumbsup: Because these commissions are only for YouTube videos, you're essentially making vertical-slices / proof-of-concepts. They can have bugs, you can take shortcuts & we can use video editing to hide bugs & achieve some effects. With that in mind, turnaround speed depends on project complexity but for an average commission I'd expect delivery two days - five days Send me a email at either lmaololtbhhonest@gmail.com OR Business@tbhhonest.com if you're interested! preview of channel: https://imgur.com/a/bOVkiUo LINK:  https://www.youtube.com/channel/UCnwo3X3eCrUp7N1DZPc-MGQ  
    • If you want a tiny fraction of offset, use float.epsilon. 0.01 will actually be noticeable. It's about 1/6th of a texture pixel.
  • Topics

  • Who's Online (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.