Sign in to follow this  
Followers 3
Nakoma1227

Minecraft 1.12.2 Forge Server Crashes

By Nakoma1227, in Support & Bug Reports

Recommended Posts

Nakoma1227    0

Nakoma1227
Posted

Oh, ok. :) So I run the .bat file and wait for it to open CMD and once it is done, I can go and host it then open it in minecraft?

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

Once the .bat file runs the server will be started, you should only need to open your client and use "localhost" as the Server IP.

 

Note that once the server is closed you should wait until the command window says "Press any key to continue . . ." and then it will automatically close when you click the window and press a key.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

Cadiboo    365

Cadiboo
Posted
7 minutes ago, Nakoma1227 said:

Capture.thumb.PNG.d165dcdba2c4662a5a9613bb2e29b905.PNG

Post your logs

About Me

Spoiler

My Discord - Cadiboo#8887

My Website - Cadiboo.github.io

My Mods - Cadiboo.github.io/projects

My Tutorials - Cadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

Share this post

Link to post
Share on other sites

Cadiboo    365

Cadiboo
Posted
5 minutes ago, Nakoma1227 said:

My debug log? https://gist.github.com/NakomaLola1227/0a11e760cd49be9d83e6cd9a110b2b93

That’s not the entire log

About Me

Spoiler

My Discord - Cadiboo#8887

My Website - Cadiboo.github.io

My Mods - Cadiboo.github.io/projects

My Tutorials - Cadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

Share this post

Link to post
Share on other sites

Nakoma1227    0

Nakoma1227
Posted (edited)
Spoiler

Sorry for the long list of files.

40 minutes ago, Cadiboo said:

That’s not the entire log

Files:

https://gist.github.com/NakomaLola1227/c997df55f0caa7c8e020fc9a9fe7528e

https://gist.github.com/NakomaLola1227/317a6003d232132f27e387877a814528

https://gist.github.com/NakomaLola1227/1fea89add2507a11be784fe105565158

https://gist.github.com/NakomaLola1227/52b8521b02f0724f89b72d9bf40d6286

https://gist.github.com/NakomaLola1227/0c9bd3df12e38f682fa0b0665d17b81a

https://gist.github.com/NakomaLola1227/548271d17e376310a90c5ff04720f128

https://gist.github.com/NakomaLola1227/5dbef604ba3346574cfd09828531a0fd

https://gist.github.com/NakomaLola1227/78bc5bc0f3d2b4c24d2baa18a9661be5

https://gist.github.com/NakomaLola1227/e3b329ad48783744dfa4e4c1c0ce4b24

https://gist.github.com/NakomaLola1227/bd22c0285bfd9d8f2ffe3a6db1b13c24

https://gist.github.com/NakomaLola1227/81a96a736bb090ed38152e9761f8d147

https://gist.github.com/NakomaLola1227/192ab72b04d26ef09f6e80b47674e0e9

https://gist.github.com/NakomaLola1227/e9b281951e9ff9d0e65b234f3bc91374

https://gist.github.com/NakomaLola1227/a44ab0b2cc5c135b30991dd3fe6520ee

https://gist.github.com/NakomaLola1227/b229ae83950fe79bb1e04409455fac59

https://gist.github.com/NakomaLola1227/92810f4da265c647c48c591152cd740e

https://gist.github.com/NakomaLola1227/9d84f7a7eb420af995f7608826094388

https://gist.github.com/NakomaLola1227/4b246e5fcdc5dee6d53ed80c1e466f54

https://gist.github.com/NakomaLola1227/e806f51127fcd3adb260bac47f836726

https://gist.github.com/NakomaLola1227/d419a92a65c937ff0202135c9ff8a52f

https://gist.github.com/NakomaLola1227/6240498db13885643900f1d494ebd86e

https://gist.github.com/NakomaLola1227/ad94401557cfee72c097f158709c5f8b

https://gist.github.com/NakomaLola1227/6d68b5fdd5eeeb2f62da98bc618d2c3b

https://gist.github.com/NakomaLola1227/458d25f5f501aa01c602eeb969daaf12

https://gist.github.com/NakomaLola1227/b1db2e3fc5ec67f580ee1a3eac8e2863

https://gist.github.com/NakomaLola1227/4415a6923c1779d56338e77898c68285

https://gist.github.com/NakomaLola1227/3869036470890841f5da0676d24439f8

https://gist.github.com/NakomaLola1227/2585c0c4130f881a950197747ac8bbe9

https://gist.github.com/NakomaLola1227/e541cc0c06ef5fbf5e3f9419b92ce3d6

 

Capture.PNG.518b540c4d28ce10c7d2e55ffcbc9a72.PNG

 

 

Edited by Nakoma1227

Share this post

Link to post
Share on other sites

Cadiboo    365

Cadiboo
Posted
6 minutes ago, Nakoma1227 said:
  Reveal hidden contents

Sorry for the long list of files.

Files:

https://gist.github.com/NakomaLola1227/c997df55f0caa7c8e020fc9a9fe7528e

https://gist.github.com/NakomaLola1227/317a6003d232132f27e387877a814528

https://gist.github.com/NakomaLola1227/1fea89add2507a11be784fe105565158

https://gist.github.com/NakomaLola1227/52b8521b02f0724f89b72d9bf40d6286

https://gist.github.com/NakomaLola1227/0c9bd3df12e38f682fa0b0665d17b81a

https://gist.github.com/NakomaLola1227/548271d17e376310a90c5ff04720f128

https://gist.github.com/NakomaLola1227/5dbef604ba3346574cfd09828531a0fd

https://gist.github.com/NakomaLola1227/78bc5bc0f3d2b4c24d2baa18a9661be5

https://gist.github.com/NakomaLola1227/e3b329ad48783744dfa4e4c1c0ce4b24

https://gist.github.com/NakomaLola1227/bd22c0285bfd9d8f2ffe3a6db1b13c24

https://gist.github.com/NakomaLola1227/81a96a736bb090ed38152e9761f8d147

https://gist.github.com/NakomaLola1227/192ab72b04d26ef09f6e80b47674e0e9

https://gist.github.com/NakomaLola1227/e9b281951e9ff9d0e65b234f3bc91374

https://gist.github.com/NakomaLola1227/a44ab0b2cc5c135b30991dd3fe6520ee

https://gist.github.com/NakomaLola1227/b229ae83950fe79bb1e04409455fac59

https://gist.github.com/NakomaLola1227/92810f4da265c647c48c591152cd740e

https://gist.github.com/NakomaLola1227/9d84f7a7eb420af995f7608826094388

https://gist.github.com/NakomaLola1227/4b246e5fcdc5dee6d53ed80c1e466f54

https://gist.github.com/NakomaLola1227/e806f51127fcd3adb260bac47f836726

https://gist.github.com/NakomaLola1227/d419a92a65c937ff0202135c9ff8a52f

https://gist.github.com/NakomaLola1227/6240498db13885643900f1d494ebd86e

https://gist.github.com/NakomaLola1227/ad94401557cfee72c097f158709c5f8b

https://gist.github.com/NakomaLola1227/6d68b5fdd5eeeb2f62da98bc618d2c3b

https://gist.github.com/NakomaLola1227/458d25f5f501aa01c602eeb969daaf12

https://gist.github.com/NakomaLola1227/b1db2e3fc5ec67f580ee1a3eac8e2863

https://gist.github.com/NakomaLola1227/4415a6923c1779d56338e77898c68285

https://gist.github.com/NakomaLola1227/3869036470890841f5da0676d24439f8

https://gist.github.com/NakomaLola1227/2585c0c4130f881a950197747ac8bbe9

https://gist.github.com/NakomaLola1227/e541cc0c06ef5fbf5e3f9419b92ce3d6

 

Capture.PNG.518b540c4d28ce10c7d2e55ffcbc9a72.PNG

 

 

so which one is your full most recent debug log?

About Me

Spoiler

My Discord - Cadiboo#8887

My Website - Cadiboo.github.io

My Mods - Cadiboo.github.io/projects

My Tutorials - Cadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

The gist expired or something, it's a 404.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

404, please check the link before sending it.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

More Player Models appears to be broken, if you do not have the latest version try updating.

Crayfish's Furniture mod has a known bug that is currently fixed in development but has not been fixed in a release yet, the workaround is disabling the welcome message from the server's cfm.cfg, located in the config folder.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Sign in to follow this  
Followers 3
Go To Topic Listing