Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

Failure in Operation Task :reobfJar during build


Flerponius
 Share

Recommended Posts

CMD or Powershell?

I need a better log but I need to know what you're using in order to give you the command to generate that better log

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

It shouldn't be the issue, but again this isn't showing everything I need:
CMD (Note: This will redirect to a file and will not show anything in console, wait for the prompt to show up again):

gradlew build --refresh-dependencies --rerun-tasks --stacktrace --console plain 1> output.log 2>&1

 

PowerShell:

.\gradlew build --refresh-dependencies --rerun-tasks --stacktrace --console plain | Tee-Object -Path output.log

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

  • 2 weeks later...

Sorry about taking so long to get back to you. The log is as follows:


> Configure project :
New Dep: net.minecraftforge:forge:1.15.2-31.2.0_mapped_snapshot_20200514-1.15.1

> Task :compileJava NO-SOURCE
> Task :processResources NO-SOURCE
> Task :classes UP-TO-DATE
> Task :jar
> Task :downloadMcpConfig
> Task :extractSrg
> Task :createMcpToSrg
> Task :reobfJar
> Task :assemble
> Task :compileTestJava NO-SOURCE
> Task :processTestResources NO-SOURCE
> Task :testClasses UP-TO-DATE
> Task :test NO-SOURCE
> Task :check UP-TO-DATE
> Task :build

Deprecated Gradle features were used in this build, making it incompatible with Gradle 5.0.
Use '--warning-mode all' to show the individual deprecation warnings.
See https://docs.gradle.org/4.10.3/userguide/command_line_interface.html#sec:command_line_warnings

BUILD SUCCESSFUL in 20s
5 actionable tasks: 5 executed

Link to comment
Share on other sites

Well that looks like you're good now, the command I gave you included some refresh flags that essentially told gradle to take it from the top in addition to the options for logging it to a file.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Recently Browsing

    No registered users viewing this page.

  • Posts

    • Hi, so I was making an item that sends info to the server to do some work, and I want the server to send the client back the results? How do I do that? Here is my code:   The snippet that sends the packet to the server SimpleChannelNetwork.CHANNEL.sendToServer(new CreateStructureCompass("fortress"));   The file that manage the traffic package io.github.bossmania.NetherandEndMaps.core.network; import io.github.bossmania.NetherandEndMaps.NetherandEndMaps; import io.github.bossmania.NetherandEndMaps.core.network.message.CreateStructureCompass; import net.minecraft.util.ResourceLocation; import net.minecraftforge.fml.network.NetworkRegistry; import net.minecraftforge.fml.network.simple.SimpleChannel; public class SimpleChannelNetwork { public static final String NETWORK_VERSION = "0.1.0"; public static final SimpleChannel CHANNEL = NetworkRegistry.newSimpleChannel( new ResourceLocation(NetherandEndMaps.MOD_ID, "network"), () -> NETWORK_VERSION, version -> version.equals(NETWORK_VERSION), version -> version.equals(NETWORK_VERSION)); public static void init() { CHANNEL.registerMessage(0, CreateStructureCompass.class ,CreateStructureCompass::encode, CreateStructureCompass::decode, CreateStructureCompass::handle); } }   the code that handle the packet receive and where I want the server to send back a packet to the client package io.github.bossmania.NetherandEndMaps.core.network.message; import java.util.function.Supplier; import io.github.bossmania.NetherandEndMaps.common.items.TemporaryItem; import net.minecraft.entity.player.ServerPlayerEntity; import net.minecraft.item.ItemStack; import net.minecraft.network.PacketBuffer; import net.minecraft.util.math.BlockPos; import net.minecraft.world.gen.feature.structure.Structure; import net.minecraft.world.server.ServerWorld; import net.minecraftforge.fml.network.NetworkEvent; import net.minecraft.item.Item; import net.minecraft.item.ItemGroup; public class CreateStructureCompass { public String structureType; public CreateStructureCompass() { } //create the constructor and store the structureType public CreateStructureCompass(String structureType) { this.structureType = structureType; } //encode the message public static void encode(CreateStructureCompass message, PacketBuffer buffer) { buffer.writeString(message.structureType); } //decode the message public static CreateStructureCompass decode(PacketBuffer buffer) { return new CreateStructureCompass(buffer.readString()); } //execute function when message is sent to server public static void handle(CreateStructureCompass message, Supplier<NetworkEvent.Context> contextSupplier) { NetworkEvent.Context context = contextSupplier.get(); context.enqueueWork(() -> { //get the player and the server ServerPlayerEntity player = context.getSender(); ServerWorld SEWorld = player.getServerWorld(); //get the location of the structure BlockPos structureLocation = SEWorld.func_241117_a_(Structure.FORTRESS, player.getPosition(),100, false); //this is where I want the server to send structureLocation back to the player }); context.setPacketHandled(true); } }  
    • I cannot get an instance of MC Forge to run with either the vanilla launcher or GDLauncher, yet vanilla MC and Fabric MC work fine in both.  I am running the latest versions of everything, and no 1.18-compatible version of Forge will launch even though they all install without fail. Using the vanilla launcher I get exit code 0 and the following logs: Debug log Latest log With GDLauncher I get the following console output:  
    • In 1.15 and before, you could get the item being held/dragged by the cursor using PlayerInventory#getItemStack. This no longer seems to be the case. How do we do this now?
    • I created a particle using  public class NukeParticle extends BasicParticleType implements IParticleData { public NukeParticle(boolean alwaysShow) { super(alwaysShow); } @Override public BasicParticleType getType() { return ParticleTypes.LARGE_SMOKE; } @Override public String getParameters() { return ParticleTypes.LARGE_SMOKE.getParameters(); } } and when I register it using  public class ParticlesReg { public static final RegistryObject<NukeParticle> YELLOW_PART = Regist.PARTICLES.register("yellow_particle", ()-> new NukeParticle(true)); public static void Register() { } } it just seems to crash anyone got an idea to what is going on the crash log is  ---- Minecraft Crash Report ---- // Shall we play a game? Time: 12/3/21 4:19 PM Description: Rendering overlay java.lang.IllegalStateException: Redundant texture list for particle lndfmod:yellow_particle at net.minecraft.client.particle.ParticleManager.loadTextureLists(ParticleManager.java:217) ~[forge:?] {re:classloading,pl:accesstransformer:B,pl:runtimedistcleaner:A} at net.minecraft.client.particle.ParticleManager.lambda$null$0(ParticleManager.java:169) ~[forge:?] {re:classloading,pl:accesstransformer:B,pl:runtimedistcleaner:A} at java.util.concurrent.CompletableFuture$AsyncRun.run(CompletableFuture.java:1640) ~[?:1.8.0_311] {} at java.util.concurrent.CompletableFuture$AsyncRun.exec(CompletableFuture.java:1632) ~[?:1.8.0_311] {} at java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:289) ~[?:1.8.0_311] {} at java.util.concurrent.ForkJoinPool$WorkQueue.runTask(ForkJoinPool.java:1067) ~[?:1.8.0_311] {} at java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1703) ~[?:1.8.0_311] {} at java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:172) ~[?:1.8.0_311] {} A detailed walkthrough of the error, its code path and all known details is as follows: --------------------------------------------------------------------------------------- -- Head -- Thread: Render thread Stacktrace: at net.minecraft.client.renderer.GameRenderer.updateCameraAndRender(GameRenderer.java:495) ~[forge:?] {re:classloading,pl:accesstransformer:B,pl:runtimedistcleaner:A} -- Overlay render details -- Details: Overlay name: net.minecraft.client.gui.ResourceLoadProgressGui Stacktrace: at net.minecraft.client.renderer.GameRenderer.updateCameraAndRender(GameRenderer.java:495) ~[forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-recomp.jar:?] {re:classloading,pl:accesstransformer:B,pl:runtimedistcleaner:A} at net.minecraft.client.Minecraft.runGameLoop(Minecraft.java:1002) ~[forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-recomp.jar:?] {re:classloading,pl:accesstransformer:B,pl:runtimedistcleaner:A} at net.minecraft.client.Minecraft.run(Minecraft.java:612) ~[forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-recomp.jar:?] {re:classloading,pl:accesstransformer:B,pl:runtimedistcleaner:A} at net.minecraft.client.main.Main.main(Main.java:184) ~[forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-recomp.jar:?] {re:classloading,pl:runtimedistcleaner:A} at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[?:1.8.0_311] {} at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) ~[?:1.8.0_311] {} at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[?:1.8.0_311] {} at java.lang.reflect.Method.invoke(Method.java:498) ~[?:1.8.0_311] {} at net.minecraftforge.userdev.FMLUserdevClientLaunchProvider.lambda$launchService$0(FMLUserdevClientLaunchProvider.java:52) ~[forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-recomp.jar:?] {} at cpw.mods.modlauncher.LaunchServiceHandlerDecorator.launch(LaunchServiceHandlerDecorator.java:37) [modlauncher-8.0.9.jar:?] {} at cpw.mods.modlauncher.LaunchServiceHandler.launch(LaunchServiceHandler.java:54) [modlauncher-8.0.9.jar:?] {} at cpw.mods.modlauncher.LaunchServiceHandler.launch(LaunchServiceHandler.java:72) [modlauncher-8.0.9.jar:?] {} at cpw.mods.modlauncher.Launcher.run(Launcher.java:82) [modlauncher-8.0.9.jar:?] {} at cpw.mods.modlauncher.Launcher.main(Launcher.java:66) [modlauncher-8.0.9.jar:?] {} at net.minecraftforge.userdev.LaunchTesting.main(LaunchTesting.java:105) [forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-recomp.jar:?] {} -- System Details -- Details: Minecraft Version: 1.16.4 Minecraft Version ID: 1.16.4 Operating System: Windows 10 (amd64) version 10.0 Java Version: 1.8.0_311, Oracle Corporation Java VM Version: Java HotSpot(TM) 64-Bit Server VM (mixed mode), Oracle Corporation Memory: 1848128352 bytes (1762 MB) / 3042443264 bytes (2901 MB) up to 7622623232 bytes (7269 MB) CPUs: 12 JVM Flags: 1 total; -XX:HeapDumpPath=MojangTricksIntelDriversForPerformance_javaw.exe_minecraft.exe.heapdump ModLauncher: 8.0.9+86+master.3cf110c ModLauncher launch target: fmluserdevclient ModLauncher naming: mcp ModLauncher services: /mixin-0.8.2.jar mixin PLUGINSERVICE /eventbus-4.0.0.jar eventbus PLUGINSERVICE /forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-launcher.jar object_holder_definalize PLUGINSERVICE /forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-launcher.jar runtime_enum_extender PLUGINSERVICE /accesstransformers-3.0.1.jar accesstransformer PLUGINSERVICE /forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-launcher.jar capability_inject_definalize PLUGINSERVICE /forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-launcher.jar runtimedistcleaner PLUGINSERVICE /mixin-0.8.2.jar mixin TRANSFORMATIONSERVICE /forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16.3-launcher.jar fml TRANSFORMATIONSERVICE FML: 35.1 Forge: net.minecraftforge:35.1.37 FML Language Providers: javafml@35.1 minecraft@1 Mod List: client-extra.jar |Minecraft |minecraft |1.16.4 |ENQUEUE_IM|a1:d4:5e:04:4f:d3:d6:e0:7b:37:97:cf:77:b0:de:ad:4a:47:ce:8c:96:49:5f:0a:cf:8c:ae:b2:6d:4b:8a:3f forge-1.16.4-35.1.37_mapped_snapshot_20201028-1.16|Forge |forge |35.1.37 |ENQUEUE_IM|NOSIGNATURE main |The Ladon Fr*** Mod 1.16.4 |lndfmod |NONE |SIDED_SETU|NOSIGNATURE Crash Report UUID: 734f5cd3-7a52-470e-ab9e-c51bffee2944 Launched Version: MOD_DEV Backend library: LWJGL version 3.2.2 build 10 Backend API: NVIDIA GeForce GTX 1080/PCIe/SSE2 GL version 4.6.0 NVIDIA 510.10, NVIDIA Corporation GL Caps: Using framebuffer using OpenGL 3.0 Using VBOs: Yes Is Modded: Definitely; Client brand changed to 'forge' Type: Client (map_client.txt) Graphics mode: fancy Resource Packs: Current Language: English (US) CPU: 12x Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz  
  • Topics

  • Who's Online (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.