Sign in to follow this  
Followers 1
BIGDog8808

HELP! WORLD WONT WORK

By BIGDog8808, in Support & Bug Reports

Recommended Posts

BIGDog8808    0

BIGDog8808
Posted

So when I tried to open my world, which could be opened on the regular version of Minecraft, it says reading world information. Than after that it goes to the loading screen (The screen with dirt blocks). It stays on that screen until I try to close out java when it says the game has crashed. What I find even weirder is that I can use forge to open any other world and use mods on them so I am really confused on what the issue is. I have also tryed to reinstall forge and that will not work. Someone please help.

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

What version of Minecraft are you using?

  • Like 1

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

Can you provide the world save please?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

Don't try to share the folder, zip it up first

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

Send it via google drive I guess

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

Ok so in modern versions of Forge, server configs are save-specific, and your server config has become corrupted, delete it

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

DaemonUmbra    541

DaemonUmbra
Posted

I told you to delete a file in the save, not the save itself

Go into the save and delete forge-server.toml from serverconfig

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Sign in to follow this  
Followers 1
Go To Topic Listing


  • Recently Browsing

    No registered users viewing this page.

  • Posts

    • Beethoven92
      [1.16.5] How to make EnchantedBook go to Custom ItemGroup

      By Beethoven92 · Posted

      Show what you tried then. It should be "enchantment.your_mod_id.your_enchantment_id"
    • DrigglyEast
      Fatally Missing Registry Entries

      By DrigglyEast · Posted

      Trying to run an rlcraft server on my computer and get the message "Fatally Missing Registry Entries" when I try to join.  [02:54:35] [Server thread/INFO] [minecraft/MinecraftServer]: Preparing spawn area: 81% [02:54:36] [Server thread/INFO] [minecraft/DedicatedServer]: Done (3.086s)! For help, type "help" or "?" [02:54:36] [Server thread/INFO] [globalgamerules]: Saving gamerules of dimension -1 (world) to config [02:54:36] [Server thread/INFO] [FML]: Unloading dimension -1 [02:54:36] [Server thread/INFO] [globalgamerules]: Saving gamerules of dimension 1 (world) to config [02:54:36] [Server thread/INFO] [FML]: Unloading dimension 1 [02:54:36] [Server thread/INFO] [globalgamerules]: Saving gamerules of dimension 111 (world) to config [02:54:36] [Server thread/INFO] [FML]: Unloading dimension 111 [02:55:21] [Server thread/INFO] [antiqueatlas]: Saving local markers data to NBT [02:55:49] [User Authenticator #1/INFO] [minecraft/NetHandlerLoginServer]: UUID of player DrigglyEast is cf53edaf-7b26-428e-8075-732115bacf48 [02:55:49] [Netty Server IO #2/INFO] [FML]: Client protocol version 2 [02:55:49] [Netty Server IO #2/INFO] [FML]: Client attempting to join with 125 mods : wolfarmor@3.4.1.1,grapplemod@1.12.2-v11.1,levelup2@${version},friendlyendermite@1.0,disenchanter@1.6,foodexpansion@1.3,globalgamerules@2.2,alcatrazcore@1.0.4,creativecoredummy@1.0.0,multimine@1.6.2,tickprofiler@1.12-0.0.10,neat@1.4-17,forgeendertech@1.12.2-4.5.2.0,reborncore@3.19.3.524,enhancedvisuals@1.0,forgelin@1.8.4,familiarfauna@1.0.11,stg@1.12.2-1.2.3,llibrary@1.7.19,snowrealmagic@0.3.3,carryon@1.12.3,loadingscreens@0.3.1,mainmenuscale@1.0,fbp@2.4.1,dshuds@3.6.0.0,crafttweakerjei@2.0.3,aireducer@0.1.3,craftablechainmail@1.0,chunkanimator@1.2,compatskills@1.12.2-1.17.0,defiledlands@1.4.3,battletowers@1.6.5,reccomplex@1.4.8.2,notreepunching@2.0.20,corpsecomplex@1.0.10.1,lostsouls@1.1.4,resourceloader@1.5.3,lycanitesmobs@2.0.7.1 - MC 1.12.2,roguelike@1.8.0,potioncore@1.9_for_1.12.2,carrots@1.0.0b1,qualitytools@1.0.7_for_1.12.2,forgottenitems@1.2.1,spartanfire@0.05,lostcities@2.0.22,FML@8.0.99.99,spartanweaponry@beta 1.3.8,itemphysic@1.4.0,tanspit@1.12.2-1.3,dttraverse@1.5,scalinghealth@1.3.37,switchbow@1.5.7,dynamictrees@1.12.2-0.9.7,baubleshud@5.0.2,ctgui@1.0.0,dldungeonsjbg@1.13.2,advanced-fishing@1.3.3,rltweaker@0.3.0,coralreef@2.0,xpfromharvest@1.1.0,trumpetskeleton@1.12-1.0.2.1,bountifulbaubles@0.0.1,jei@4.15.0.291,bnbgaminglib@2.17.6,custommainmenu@2.0.9.1,bacodifficulty@1.0.3,ivtoolkit@1.3.3-1.12,iseedragons@0.12,mujmajnkraftsbettersurvival@1.4.1,potionfingers@r1.0-8,waystones@4.1.0,mcp@9.42,campfire@1.2,comforts@1.4.1.3,tumbleweed@1.12-0.4.7,sereneseasons@1.2.18,adhooks@1.12.2-3.2.3.0,inventorytweaks@1.64+dev.151.822d839,foamfixcore@7.7.4,realistictorches@2.1.1,bettercombatmod@1.5.6,xat@0.29.2,iceandfire@1.7.1,traverse@1.6.0,crafttweaker@4.1.20,firstaid@1.6.13,forge@14.23.5.2838,ruins@17.2,phosphor-lighting@1.12.2-0.2.6,wearablebackpacks@3.1.4,orelib@3.6.0.1,dsurround@3.6.1.0,antiqueatlas@4.6.3,infernalmobs@1.7.6,variedcommodities@1.12.2,minecraft@1.12.2,itlt@1.0.0,enchdesc@1.1.20,mousetweaks@2.10,roughtweaks@1.0,toolbelt@1.9.12,silentlib@3.0.13,baubles@1.5.2,creativecore@1.9.9,tschipplib@1.1.3,somanyenchantments@0.4.4,armorunder@1.0.0,bloodmoon@1.5.3,spartanshields@1.5.4,tnt_utilities@1.2.3,autoreglib@1.3-32,reskillable@1.12.2-1.13.0,sit@v1.3,toughasnails@3.1.0.141,anvilpatch@1.0.0,spawnercontrol@1.6.3b,antiqueatlasoverlay@1.2,foamfix@0.10.10-1.12.2,aquaculture@1.6.8,tnt_utilities_core@1.2.3,craftablehorsearmour@1.3,soundfilters@0.12_for_1.12,betterfoliage@2.2.0,mobends@0.24,xpbook@v1.1.4 [02:55:49] [Server thread/INFO] [minecraft/NetHandlerPlayServer]: DrigglyEast lost connection: Disconnected [02:55:49] [Server thread/INFO] [minecraft/DedicatedServer]: DrigglyEast left the game [02:56:47] [User Authenticator #2/INFO] [minecraft/NetHandlerLoginServer]: UUID of player DrigglyEast is cf53edaf-7b26-428e-8075-732115bacf48 [02:56:47] [Netty Server IO #5/INFO] [FML]: Client protocol version 2 [02:56:47] [Netty Server IO #5/INFO] [FML]: Client attempting to join with 125 mods : wolfarmor@3.4.1.1,grapplemod@1.12.2-v11.1,levelup2@${version},friendlyendermite@1.0,disenchanter@1.6,foodexpansion@1.3,globalgamerules@2.2,alcatrazcore@1.0.4,creativecoredummy@1.0.0,multimine@1.6.2,tickprofiler@1.12-0.0.10,neat@1.4-17,forgeendertech@1.12.2-4.5.2.0,reborncore@3.19.3.524,enhancedvisuals@1.0,forgelin@1.8.4,familiarfauna@1.0.11,stg@1.12.2-1.2.3,llibrary@1.7.19,snowrealmagic@0.3.3,carryon@1.12.3,loadingscreens@0.3.1,mainmenuscale@1.0,fbp@2.4.1,dshuds@3.6.0.0,crafttweakerjei@2.0.3,aireducer@0.1.3,craftablechainmail@1.0,chunkanimator@1.2,compatskills@1.12.2-1.17.0,defiledlands@1.4.3,battletowers@1.6.5,reccomplex@1.4.8.2,notreepunching@2.0.20,corpsecomplex@1.0.10.1,lostsouls@1.1.4,resourceloader@1.5.3,lycanitesmobs@2.0.7.1 - MC 1.12.2,roguelike@1.8.0,potioncore@1.9_for_1.12.2,carrots@1.0.0b1,qualitytools@1.0.7_for_1.12.2,forgottenitems@1.2.1,spartanfire@0.05,lostcities@2.0.22,FML@8.0.99.99,spartanweaponry@beta 1.3.8,itemphysic@1.4.0,tanspit@1.12.2-1.3,dttraverse@1.5,scalinghealth@1.3.37,switchbow@1.5.7,dynamictrees@1.12.2-0.9.7,baubleshud@5.0.2,ctgui@1.0.0,dldungeonsjbg@1.13.2,advanced-fishing@1.3.3,rltweaker@0.3.0,coralreef@2.0,xpfromharvest@1.1.0,trumpetskeleton@1.12-1.0.2.1,bountifulbaubles@0.0.1,jei@4.15.0.291,bnbgaminglib@2.17.6,custommainmenu@2.0.9.1,bacodifficulty@1.0.3,ivtoolkit@1.3.3-1.12,iseedragons@0.12,mujmajnkraftsbettersurvival@1.4.1,potionfingers@r1.0-8,waystones@4.1.0,mcp@9.42,campfire@1.2,comforts@1.4.1.3,tumbleweed@1.12-0.4.7,sereneseasons@1.2.18,adhooks@1.12.2-3.2.3.0,inventorytweaks@1.64+dev.151.822d839,foamfixcore@7.7.4,realistictorches@2.1.1,bettercombatmod@1.5.6,xat@0.29.2,iceandfire@1.7.1,traverse@1.6.0,crafttweaker@4.1.20,firstaid@1.6.13,forge@14.23.5.2838,ruins@17.2,phosphor-lighting@1.12.2-0.2.6,wearablebackpacks@3.1.4,orelib@3.6.0.1,dsurround@3.6.1.0,antiqueatlas@4.6.3,infernalmobs@1.7.6,variedcommodities@1.12.2,minecraft@1.12.2,itlt@1.0.0,enchdesc@1.1.20,mousetweaks@2.10,roughtweaks@1.0,toolbelt@1.9.12,silentlib@3.0.13,baubles@1.5.2,creativecore@1.9.9,tschipplib@1.1.3,somanyenchantments@0.4.4,armorunder@1.0.0,bloodmoon@1.5.3,spartanshields@1.5.4,tnt_utilities@1.2.3,autoreglib@1.3-32,reskillable@1.12.2-1.13.0,sit@v1.3,toughasnails@3.1.0.141,anvilpatch@1.0.0,spawnercontrol@1.6.3b,antiqueatlasoverlay@1.2,foamfix@0.10.10-1.12.2,aquaculture@1.6.8,tnt_utilities_core@1.2.3,craftablehorsearmour@1.3,soundfilters@0.12_for_1.12,betterfoliage@2.2.0,mobends@0.24,xpbook@v1.1.4 [02:56:47] [Server thread/INFO] [minecraft/NetHandlerPlayServer]: DrigglyEast lost connection: Disconnected [02:56:47] [Server thread/INFO] [minecraft/DedicatedServer]: DrigglyEast left the game [02:59:20] [User Authenticator #3/INFO] [minecraft/NetHandlerLoginServer]: UUID of player DrigglyEast is cf53edaf-7b26-428e-8075-732115bacf48 [02:59:20] [Netty Server IO #8/INFO] [FML]: Client protocol version 2 [02:59:20] [Netty Server IO #8/INFO] [FML]: Client attempting to join with 125 mods : wolfarmor@3.4.1.1,grapplemod@1.12.2-v11.1,levelup2@${version},friendlyendermite@1.0,disenchanter@1.6,foodexpansion@1.3,globalgamerules@2.2,alcatrazcore@1.0.4,creativecoredummy@1.0.0,multimine@1.6.2,tickprofiler@1.12-0.0.10,neat@1.4-17,forgeendertech@1.12.2-4.5.2.0,reborncore@3.19.3.524,enhancedvisuals@1.0,forgelin@1.8.4,familiarfauna@1.0.11,stg@1.12.2-1.2.3,llibrary@1.7.19,snowrealmagic@0.3.3,carryon@1.12.3,loadingscreens@0.3.1,mainmenuscale@1.0,fbp@2.4.1,dshuds@3.6.0.0,crafttweakerjei@2.0.3,aireducer@0.1.3,craftablechainmail@1.0,chunkanimator@1.2,compatskills@1.12.2-1.17.0,defiledlands@1.4.3,battletowers@1.6.5,reccomplex@1.4.8.2,notreepunching@2.0.20,corpsecomplex@1.0.10.1,lostsouls@1.1.4,resourceloader@1.5.3,lycanitesmobs@2.0.7.1 - MC 1.12.2,roguelike@1.8.0,potioncore@1.9_for_1.12.2,carrots@1.0.0b1,qualitytools@1.0.7_for_1.12.2,forgottenitems@1.2.1,spartanfire@0.05,lostcities@2.0.22,FML@8.0.99.99,spartanweaponry@beta 1.3.8,itemphysic@1.4.0,tanspit@1.12.2-1.3,dttraverse@1.5,scalinghealth@1.3.37,switchbow@1.5.7,dynamictrees@1.12.2-0.9.7,baubleshud@5.0.2,ctgui@1.0.0,dldungeonsjbg@1.13.2,advanced-fishing@1.3.3,rltweaker@0.3.0,coralreef@2.0,xpfromharvest@1.1.0,trumpetskeleton@1.12-1.0.2.1,bountifulbaubles@0.0.1,jei@4.15.0.291,bnbgaminglib@2.17.6,custommainmenu@2.0.9.1,bacodifficulty@1.0.3,ivtoolkit@1.3.3-1.12,iseedragons@0.12,mujmajnkraftsbettersurvival@1.4.1,potionfingers@r1.0-8,waystones@4.1.0,mcp@9.42,campfire@1.2,comforts@1.4.1.3,tumbleweed@1.12-0.4.7,sereneseasons@1.2.18,adhooks@1.12.2-3.2.3.0,inventorytweaks@1.64+dev.151.822d839,foamfixcore@7.7.4,realistictorches@2.1.1,bettercombatmod@1.5.6,xat@0.29.2,iceandfire@1.7.1,traverse@1.6.0,crafttweaker@4.1.20,firstaid@1.6.13,forge@14.23.5.2838,ruins@17.2,phosphor-lighting@1.12.2-0.2.6,wearablebackpacks@3.1.4,orelib@3.6.0.1,dsurround@3.6.1.0,antiqueatlas@4.6.3,infernalmobs@1.7.6,variedcommodities@1.12.2,minecraft@1.12.2,itlt@1.0.0,enchdesc@1.1.20,mousetweaks@2.10,roughtweaks@1.0,toolbelt@1.9.12,silentlib@3.0.13,baubles@1.5.2,creativecore@1.9.9,tschipplib@1.1.3,somanyenchantments@0.4.4,armorunder@1.0.0,bloodmoon@1.5.3,spartanshields@1.5.4,tnt_utilities@1.2.3,autoreglib@1.3-32,reskillable@1.12.2-1.13.0,sit@v1.3,toughasnails@3.1.0.141,anvilpatch@1.0.0,spawnercontrol@1.6.3b,antiqueatlasoverlay@1.2,foamfix@0.10.10-1.12.2,aquaculture@1.6.8,tnt_utilities_core@1.2.3,craftablehorsearmour@1.3,soundfilters@0.12_for_1.12,betterfoliage@2.2.0,mobends@0.24,xpbook@v1.1.4 [02:59:20] [Server thread/INFO] [minecraft/NetHandlerPlayServer]: DrigglyEast lost connection: Disconnected [02:59:20] [Server thread/INFO] [minecraft/DedicatedServer]: DrigglyEast left the game  
    • am pro
      Forge jar file not opening

      By am pro · Posted

      nvm uninstall winrar and it should apper as a coffee if that dosent work then install jarfix https://johann.loefflmann.net/en/software/jarfix/index.html
    • IdleZombie_
      [Solved] gradlew genItellijRuns - Asset import 'Hash Failed' error

      By IdleZombie_ · Posted

      Okay, thank you! I didn't see you replied up-to now unfortunately, but, I fixed the error by getting a friend of mine with a better internet to download the assets and send me the missing files. As for the gradle scan, thank you so much for letting me know! I edited that out since the problem is already fixed!
    • Luis_ST
      [1.16.5] Help with custom Backpack (slot background and mouse wheel move)

      By Luis_ST · Posted

      I created a custom backpack. which should get a few additional features (adding the armor slots, offhand slot, tool swicht slot). the armor slots and the offhand slot of the player work. i need some help for the siwtch slot tool: 1. the slot should have a custom background (like the player armor slots). I've already tried this on the way as vanilla does it (it doesn't work). this is the slot code:   public static class ToolSlot extends SlotItemHandler { public static final ResourceLocation LOCATION_BLOCKS_TEXTURE = new ResourceLocation("textures/atlas/blocks.png"); public static final ResourceLocation EMPTY_TOOL_SLOT = new ResourceLocation("cave:textures/items/empty_tool_slot.png"); public ToolSlot(IItemHandler itemHandler, int index, int xPosition, int yPosition) { super(itemHandler, index, xPosition, yPosition); } @Override public int getSlotStackLimit() { return 1; } @Override public boolean isItemValid(ItemStack stack) { return stack.getItem() instanceof TieredItem; } @Override public Pair<ResourceLocation, ResourceLocation> getBackground() { return Pair.of(LOCATION_BLOCKS_TEXTURE, EMPTY_TOOL_SLOT); } }   2. I want that when the player sneaks and moves the mouse wheel, the item in the hand is swapped with the item in the backpack slot. Now how do I check whether the mouse wheel is moving (even if the gui is not open), and how do I prevent the scrolling in the hotbar?  

  • Topics

  • Who's Online (See full list)