Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

When I create new world game freezes on 100%


Recommended Posts

When I go to create a new world so I can play, the game loads it and then stops at 100%. It just doesn't do anything. I can't even close the window, I have to restart my computer. And if I try loading the world after restarting, it's just another endless loading screen, but I can close the window this time. I am on the latest forge version.
spacer.png

Link to post
Share on other sites

Post debug.log (not latest.log) using one of the paste sites listed in my signature below, just expand the spoilers.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to post
Share on other sites

Is this a pre-made modpack or one you made?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Twitch Launcher: If you are using the Twitch Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Twitch's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to post
Share on other sites

Just a quick question. Does this screen have anything to do with the problem? Edit: I was removing mods and this screen was just because of a single mod. So no need to worry about it now.spacer.png

Edited by GioTaBoi
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    No registered users viewing this page.

  • Posts

    • What I've been trying to do is I have been attempting to implement an item that can create a transparent blue layer around the entire player. I am using Curios' API for this, as the item is meant to be an equippable accessory. There are also other accessories I have implemented to the mod using the API. I have been able to implement everything that handles this rendering with the accessory item, however I've become stuck after running into a specific issue: when the transparent blue layer is active, it will prevent any accessories specifically on the player's arms from rendering. As far as I can tell, this only happens with the accessories on the player's arms (such as the gloves or even Curios' template knuckles item), as accessories rendering on the player's body for some reason render just fine under the transparent layer. Images for better context: I have been at this for quite awhile but haven't able to figure out what is causing this issue, especially since the inconsistency between rendering for body parts has made me even more confused. It could be a Curios issue, but nothing in its accessory layer code exactly stands out as a cause (if it is indeed Curios' fault though it would at least be good to know what the issue is to pass on to the mod dev). The pendant and glove accessories both render with the same RenderType and render buffer, which I duplicated based on the vanilla armor layer's choices for that, as the vanilla armor layer is also immune to the transparency issue on the arm model part: The relevant code for items and renderers can be found below: Pendants: - https://github.com/Gilded-Games/The-Aether/blob/1.16/src/main/java/com/gildedgames/aether/common/item/accessories/pendant/PendantItem.java - https://github.com/Gilded-Games/The-Aether/blob/1.16/src/main/java/com/gildedgames/aether/client/renderer/accessory/model/PendantModel.java Gloves: - https://github.com/Gilded-Games/The-Aether/blob/1.16/src/main/java/com/gildedgames/aether/common/item/accessories/gloves/GlovesItem.java - https://github.com/Gilded-Games/The-Aether/blob/1.16/src/main/java/com/gildedgames/aether/client/renderer/accessory/model/GlovesModel.java Repulsion Shield (the item creating the transparency layer): - https://github.com/Gilded-Games/The-Aether/blob/1.16/src/main/java/com/gildedgames/aether/common/item/accessories/misc/RepulsionShieldItem.java - https://github.com/Gilded-Games/The-Aether/blob/1.16/src/main/java/com/gildedgames/aether/client/renderer/accessory/model/RepulsionShieldModel.java and, if necessary, Curios' Accessory Layer (code not mine, obviously): - https://github.com/TheIllusiveC4/Curios/blob/1.16.x-forge/src/main/java/top/theillusivec4/curios/client/render/CuriosLayer.java Any help would be appreciated, as I've run out of ideas for what could be causing this issue and how I could fix it. I can provide more information if needed.
    • Ok that's fair. But it's still terrible.
    • Really old Minecraft versions are no longer supported on this forum. Please update to a modern version of Minecraft to receive support.
    • Ah sorry, you're right. I can refer you to the way Lycanites renders all of their .obj model entities, and best of all it's up to date for 1.16, but it is pretty complicated than just your standard java model. Depending on what you're doing it might not be worth it... https://gitlab.com/Lycanite/LycanitesMobs/-/tree/master/src/main/java/com/lycanitesmobs/client
    • wasn't TEST for item stacks, or tile entities? I know I have to extend an EntityRenderer, but I don't know how to get an obj to render from there
  • Topics

  • Who's Online (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy.