DnDev

Found the problem. The cullfaces were reversed. You need to set the cullface to UP on the DOWN face and vice-versa to all other faces. So that heavy shadow isn't a shadow, it's actually inside the block because the up face isn't rendered. And inside the block is almost dark because there's no light in there. Here's the final code with a few more tweaks if anyone is interested: getBuilder(block.getId().getPath()) .ao(false) .texture("particle", new ResourceLocation(xxxxx.MODID, "block/" + block.getId().getPath())) .texture("texture", new ResourceLocation(xxxxx.MODID, "block/" + block.getId().getPath())) .element() .from(0f, -2f, 0f) .to(16f, 0.01f, 16f) .face(Direction.DOWN).uvs(0f, 0f, 16f, 16f).texture("#texture").cullface(Direction.UP).end() .face(Direction.UP).uvs(0f, 0f, 16f, 16f).texture("#texture").cullface(Direction.DOWN).end() .face(Direction.NORTH).uvs(0f, 0f, 16f, 2.01f).texture("#texture").rotation(ModelBuilder.FaceRotation.UPSIDE_DOWN).cullface(Direction.SOUTH).end() .face(Direction.SOUTH).uvs(0f, 0f, 16f, 2.01f).texture("#texture").cullface(Direction.NORTH).end() .face(Direction.EAST).uvs(0f, 0f, 2.01f, 16f).texture("#texture").rotation(ModelBuilder.FaceRotation.CLOCKWISE_90).cullface(Direction.WEST).end() .face(Direction.WEST).uvs(0f, 0f, 2.01f, 16f).texture("#texture").rotation(ModelBuilder.FaceRotation.COUNTERCLOCKWISE_90).cullface(Direction.EAST).end() .end();

Hello everyone, Very junior mod maker here. I'm making a floating plank that sits over water. There's this heavy shadow on it when there's a block over it for some reason. As you can see in the picture, the lily pad that has a block over it is just a little darker from the shadow. however my custom plank is almost dark. I have no idea what might cause this. If it is how I generate the block model, here's the code I'm using: getBuilder(block.getId().getPath()) .ao(false) .texture("particle", new ResourceLocation(xxxxx.MODID, "block/" + block.getId().getPath())) .texture("texture", new ResourceLocation(xxxxx.MODID, "block/" + block.getId().getPath())) .element() .from(0.01f, -2f, 0.01f) .to(15.99f, 0.01f, 15.99f) .face(Direction.DOWN).uvs(0f, 0f, 16f, 16f).texture("#texture").cullface(Direction.DOWN).tintindex(0).end() .face(Direction.UP).uvs(0f, 0f, 16f, 16f).texture("#texture").cullface(Direction.UP).tintindex(0).end() .face(Direction.NORTH).uvs(0f, 0f, 16f, 2.01f).texture("#texture").cullface(Direction.NORTH).tintindex(0).end() .face(Direction.SOUTH).uvs(0f, 0f, 16f, 2.01f).texture("#texture").cullface(Direction.SOUTH).tintindex(0).end() .face(Direction.EAST).uvs(0f, 0f, 2.01f, 16f).texture("#texture").rotation(ModelBuilder.FaceRotation.CLOCKWISE_90).cullface(Direction.EAST).tintindex(0).end() .face(Direction.WEST).uvs(0f, 0f, 2.01f, 16f).texture("#texture").rotation(ModelBuilder.FaceRotation.CLOCKWISE_90).cullface(Direction.WEST).tintindex(0).end() .end();

Ok, giving up on that idea. I've looked in to the code but I'm still a bit confused how does the vanilla do it. Is it in the onBlockPlacedBy ? This is going to be tricky. This is my first mod so I'm still reading tutorials to get the feel of things. I also have planned a 3x3 blocks door. That one is going to be a headache ?

I’m trying to make a few new doors for v1.15.2 of the game. I’m having shape/collision problems with a bigger door, 2x2 blocks. As you can see in the pictures above, there’s a few problems. The collision shape is wrong when facing certain directions. Not only that but the rotation is off. I tried using negative values in the getShape (and also in the JSON file) but it corrects one direction and messes up another. When the door is broken there’s the missing model texture. My other doors don’t do that. I haven’t investigated this one yet. Also it seems that the “extended” part of the door is ignored. Like the door is still 2x1 blocks. The door class extends DoorBlock and overrides the getShape method. protected static final VoxelShape SOUTH_AABB_X2 = Block.makeCuboidShape(0.0D, 0.0D, 0.0D, 32.0D, 16.0D, 3.0D); protected static final VoxelShape NORTH_AABB_X2 = Block.makeCuboidShape(0.0D, 0.0D, 13.0D, 32.0D, 16.0D, 16.0D); protected static final VoxelShape WEST_AABB_X2 = Block.makeCuboidShape(13.0D, 0.0D, 0.0D, 16.0D, 16.0D, 32.0D); protected static final VoxelShape EAST_AABB_X2 = Block.makeCuboidShape(0.0D, 0.0D, 0.0D, 3.0D, 16.0D, 32.0D); @Override public VoxelShape getShape(BlockState state, IBlockReader worldIn, BlockPos pos, ISelectionContext context) { Direction direction = state.get(FACING); boolean flag = !state.get(OPEN); boolean flag1 = state.get(HINGE) == DoorHingeSide.RIGHT; switch (direction) { case EAST: default: return flag ? EAST_AABB_X2 : (flag1 ? NORTH_AABB_X2 : SOUTH_AABB_X2); case SOUTH: return flag ? SOUTH_AABB_X2 : (flag1 ? EAST_AABB_X2 : WEST_AABB_X2); case WEST: return flag ? WEST_AABB_X2 : (flag1 ? SOUTH_AABB_X2 : NORTH_AABB_X2); case NORTH: return flag ? NORTH_AABB_X2 : (flag1 ? WEST_AABB_X2 : EAST_AABB_X2); } } Bottom part JSON: { "ambientocclusion": false, "textures": { "big_spruce_door_full": "dn-moredoors:block/big_spruce_door_full" }, "elements": [ { "from": [ 0, 0, 0 ], "to": [ 3, 16, 32 ], "faces": { "down": { "texture": "#big_spruce_door_full", "uv": [ 0, 10, 16, 12 ], "rotation": 90, "cullface": "down" }, "north": { "texture": "#big_spruce_door_full", "uv": [ 5, 8, 6, 16 ], "cullface": "north" }, "south": { "texture": "#big_spruce_door_full", "uv": [ 5, 8, 6, 16 ], "cullface": "south" }, "west": { "texture": "#big_spruce_door_full", "uv": [ 0, 8, 16, 16 ], "cullface": "west" }, "east": { "texture": "#big_spruce_door_full", "uv": [ 16, 8, 0, 16 ] } } } ] } Bottom part RH JSON: { "ambientocclusion": false, "textures": { "big_spruce_door_full": "dn-moredoors:block/big_spruce_door_full" }, "elements": [ { "from": [ 0, 0, 0 ], "to": [ 3, 16, 32 ], "faces": { "down": { "texture": "#big_spruce_door_full", "uv": [ 0, 10, 16, 12 ], "rotation": 90, "cullface": "down" }, "north": { "texture": "#big_spruce_door_full", "uv": [ 5, 8, 6, 16 ], "cullface": "north" }, "south": { "texture": "#big_spruce_door_full", "uv": [ 5, 8, 6, 16 ], "cullface": "south" }, "west": { "texture": "#big_spruce_door_full", "uv": [ 16, 8, 0, 16 ], "cullface": "west" }, "east": { "texture": "#big_spruce_door_full", "uv": [ 0, 8, 16, 16 ] } } } ] } And the blockstate JSON: { "variants": { "facing=east,half=lower,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom" }, "facing=south,half=lower,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom", "y": 90 }, "facing=west,half=lower,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom", "y": 180 }, "facing=north,half=lower,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom", "y": 270 }, "facing=east,half=lower,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh" }, "facing=south,half=lower,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh", "y": 90 }, "facing=west,half=lower,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh", "y": 180 }, "facing=north,half=lower,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh", "y": 270 }, "facing=east,half=lower,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh", "y": 90 }, "facing=south,half=lower,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh", "y": 180 }, "facing=west,half=lower,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh", "y": 270 }, "facing=north,half=lower,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom_rh" }, "facing=east,half=lower,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom", "y": 270 }, "facing=south,half=lower,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom" }, "facing=west,half=lower,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom", "y": 90 }, "facing=north,half=lower,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_bottom", "y": 180 }, "facing=east,half=upper,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_top" }, "facing=south,half=upper,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_top", "y": 90 }, "facing=west,half=upper,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_top", "y": 180 }, "facing=north,half=upper,hinge=left,open=false": { "model": "dn-moredoors:block/big_spruce_door_top", "y": 270 }, "facing=east,half=upper,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_top_rh" }, "facing=south,half=upper,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_top_rh", "y": 90 }, "facing=west,half=upper,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_top_rh", "y": 180 }, "facing=north,half=upper,hinge=right,open=false": { "model": "dn-moredoors:block/big_spruce_door_top_rh", "y": 270 }, "facing=east,half=upper,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_top_rh", "y": 90 }, "facing=south,half=upper,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_top_rh", "y": 180 }, "facing=west,half=upper,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_top_rh", "y": 270 }, "facing=north,half=upper,hinge=left,open=true": { "model": "dn-moredoors:block/big_spruce_door_top_rh" }, "facing=east,half=upper,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_top", "y": 270 }, "facing=south,half=upper,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_top" }, "facing=west,half=upper,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_top", "y": 90 }, "facing=north,half=upper,hinge=right,open=true": { "model": "dn-moredoors:block/big_spruce_door_top", "y": 180 } } } Most of the JSONs are based on the vanilla Spruce Door. Assuming they are correct, there’s probably a method I need to override but have no clue which. Any help would be appreciated