September 6, 20187 yr Author 5 minutes ago, DaemonUmbra said: Have you looked at the documentation I linked? but I do not use maven, so I understood that is with maven
September 6, 20187 yr Maven or not matters only for the jar being packed inside, and there is a built-in workaround for non-maven jars. Look at the "Dependency extraction" section. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 6, 20187 yr Author 4 minutes ago, DaemonUmbra said: Maven or not matters only for the jar being packed inside, and there is a built-in workaround for non-maven jars. Look at the "Dependency extraction" section. but I'm confused about "META-INF" I do not know what it is and I do not have that folder for the location
September 6, 20187 yr It is a folder for meta files (files that contain information about the jar itself), these are built by the tool that packages the jar. https://docs.gradle.org/current/userguide/java_plugin.html#example_customization_of_manifest_mf In this case though you will want to create the folder yourself, however do nothing more than create /META-INF/libraries/ and put your dependency jar into it. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 6, 20187 yr Author This is still confusing for me, I can not understand how it is done 17 minutes ago, DaemonUmbra said: It is a folder for meta files (files that contain information about the jar itself), these are built by the compiler. https://docs.gradle.org/current/userguide/java_plugin.html#example_customization_of_manifest_mf
September 6, 20187 yr What I linked is instructions for how to have Gradle add Manifest Attributes, this includes ContainedDeps. What is shown in the example on that page goes in your build.gradle This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 6, 20187 yr Author 9 minutes ago, DaemonUmbra said: What I linked is instructions for how to have Gradle add Manifest Attributes, this includes ContainedDeps. What is shown in the example on that page goes in your build.gradle I found that, should it work? configurations { embed compile.extendsFrom embed } dependencies { embed 'club.minnced:java-discord-rpc:v2.0.1' } task generateMetaFiles { doLast { file("${buildDir}/dependencyMeta/").deleteDir() configurations.embed.resolvedConfiguration.resolvedArtifacts.each { def metaFile = file("${buildDir}/dependencyMeta/${it.file.name}.meta") metaFile.parentFile.mkdirs() def artifactRef = it.moduleVersion.toString() if (it.classifier != null) { artifactRef += ":${it.classifier}" } metaFile.text = "Maven-Artifact: $artifactRef" } } } jar { into('/') { from configurations.embed from "${buildDir}/dependencyMeta/" } manifest { attributes 'ContainedDeps': configurations.embed.collect { it.name }.join(' ') } dependsOn generateMetaFiles }
September 6, 20187 yr Author 11 minutes ago, DaemonUmbra said: What I linked is instructions for how to have Gradle add Manifest Attributes, this includes ContainedDeps. What is shown in the example on that page goes in your build.gradle Another thing, said it was easier, but then you can with shadow? as? or what do I do wrong?, really that late in understanding it (shadow) I think it would be easier
September 6, 20187 yr I have yet to see you use either method correctly and for some reason you appear to want to automate/complicate the painfully simple process of using Forge's Jar-in-Jar system. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 6, 20187 yr Author This "simple" system is complicated at least for me 3 minutes ago, DaemonUmbra said: I have yet to see you use either method correctly and for some reason you appear to want to automate/complicate the painfully simple process of using Forge's Jar-in-Jar system.
September 6, 20187 yr Author 8 minutes ago, DaemonUmbra said: I have yet to see you use either method correctly and for some reason you appear to want to automate/complicate the painfully simple process of using Forge's Jar-in-Jar system. Really can not be with shadow?
September 6, 20187 yr I believe this could be accomplished with Shadow, however the Forge system allows archiving it so it can be extracted once and only once. I see now why you were automating the meta files while my test worked without, and I feel stupid. Seems my test relied on backwards compatibility, oops. Continuing to work on my test (even though it works i don't want to get in the habit of relying on old methods). This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 6, 20187 yr Author Then can you tell me what is my problem with shadow ?, I really think I like it better 8 hours ago, DaemonUmbra said: I believe this could be accomplished with Shadow, however the Forge system allows archiving it so it can be extracted once and only once. I see now why you were automating the meta files while my test worked without, and I feel stupid. Seems my test relied on backwards compatibility, oops. Continuing to work on my test (even though it works i don't want to get in the habit of relying on old methods).
September 7, 20187 yr Author 22 hours ago, DaemonUmbra said: I believe this could be accomplished with Shadow, however the Forge system allows archiving it so it can be extracted once and only once. I see now why you were automating the meta files while my test worked without, and I feel stupid. Seems my test relied on backwards compatibility, oops. Continuing to work on my test (even though it works i don't want to get in the habit of relying on old methods). Please, I would like to be able to solve this
September 7, 20187 yr If you want to rely on the legacy system you can use Jar-in-Jar without a "Maven-Artifact" property, though from a code comment "Maven-Artifact" is likely to be required in Forge for 1.13. This means that you can do this without doing anything with meta files FOR NOW. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 7, 20187 yr Author But why? There are other mods that do the same thing that I'm trying to do now and they use shadow and they work and mine does not @DaemonUmbra Edited September 7, 20187 yr by ElOsito123
September 7, 20187 yr Because Forge's system is superior to just shoving your dependency inside your jar, Forge's system does things to prevent collisions between packed dependencies, as well as archiving them so they only need to be extracted once. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 7, 20187 yr Author 11 minutes ago, DaemonUmbra said: Because Forge's system is superior to just shoving your dependency inside your jar, Forge's system does things to prevent collisions between packed dependencies, as well as archiving them so they only need to be extracted once. That's why, those mods are made in the same way https://github.com/MCOfficer/Minecraft-RPC/blob/master/build.gradle
September 7, 20187 yr I am talking about Forge's Jar-in-Jar system, NOT shadow... The mod you linked uses shadow, not Forge's Jar-in-Jar system This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 7, 20187 yr Author Therefore, I mean that if they could do it in that way that I can not, but why do not I? 6 minutes ago, DaemonUmbra said: I am talking about Forge's Jar-in-Jar system, NOT shadow... The mod you linked uses shadow, not Forge's Jar-in-Jar system
September 7, 20187 yr Because you are not building it correctly and you are still using 1.8.X I will help you further when i see your repo updated to a modern version. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 7, 20187 yr Author 17 minutes ago, DaemonUmbra said: Because you are not building it correctly and you are still using 1.8.X I will help you further when i see your repo updated to a modern version. Okay, I'll update it
September 7, 20187 yr Not according to GitHub This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.