Jump to content
View in the app

A better way to browse. Learn more.
Forge Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

1.13.2 version installs version 1.12

joevahkiin98
in Support & Bug Reports

Featured Replies

Posted

I've downloaded a couple different versions of the 1.13.2 installer and it keeps installing the 1.12 version instead. I use the windows installer because downloading the normal installer gives me a bunch of files instead of a .jar that I can run.

  • Quote

    Where did you download the installer from?

    This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

     

    As the most common issue I feel I should put this outside the main bulk:

    The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

    If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

     

    For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

    Spoiler

    Logs (Most issues require logs to diagnose):

    Spoiler

    Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

    https://gist.github.com/: 100MB Requires member (Free)

    https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

    https://hastebin.com/: 400KB

    Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

     

    What to provide:

    ...for Crashes and Runtime issues:

    Minecraft 1.14.4 and newer:

    Post debug.log

    Older versions:

    Please update...

     

    ...for Installer Issues:

    Post your installer log, found in the same place you ran the installer

    This log will be called either installer.log or named the same as the installer but with .log on the end

    Note for Windows users:

    Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

     

    Where to get it:

    Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

     

    Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

    Spoiler
    1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
    2. Make a launcher profile targeting this version of Forge.
    3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
    4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

    Video:

    Spoiler

     

     

     

    or alternately, 

     

    Fallback ("No logs are generated"):

    If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

     

    Server Not Starting:

    Spoiler

    If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

     

    Reporting Illegal/Inappropriate Adfocus Ads:

    Spoiler

    Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

    Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

     

    Posting your mod as a GitHub Repo:

    Spoiler

    When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

    When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

     

    1. Open a command prompt (CMD, Powershell, Terminal, etc).
    2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
    3. Run the following commands:
      1. git init
      2. git remote add origin [Your Repository's URL]
        • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
      3. git fetch
      4. git checkout --track origin/master
      5. git stage *
      6. git commit -m "[Your commit message]"
      7. git push
    4. Navigate to GitHub and you should now see most of the files.
      • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
    5. Now you can share your GitHub link with those who you are asking for help.

    [Workaround line, please ignore]

     

  • Quote

    Give a url, don't just say "the official website", many try to appear to be the official site but only one is.

    This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

     

    As the most common issue I feel I should put this outside the main bulk:

    The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

    If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

     

    For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

    Spoiler

    Logs (Most issues require logs to diagnose):

    Spoiler

    Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

    https://gist.github.com/: 100MB Requires member (Free)

    https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

    https://hastebin.com/: 400KB

    Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

     

    What to provide:

    ...for Crashes and Runtime issues:

    Minecraft 1.14.4 and newer:

    Post debug.log

    Older versions:

    Please update...

     

    ...for Installer Issues:

    Post your installer log, found in the same place you ran the installer

    This log will be called either installer.log or named the same as the installer but with .log on the end

    Note for Windows users:

    Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

     

    Where to get it:

    Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

     

    Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

    Spoiler
    1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
    2. Make a launcher profile targeting this version of Forge.
    3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
    4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

    Video:

    Spoiler

     

     

     

    or alternately, 

     

    Fallback ("No logs are generated"):

    If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

     

    Server Not Starting:

    Spoiler

    If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

     

    Reporting Illegal/Inappropriate Adfocus Ads:

    Spoiler

    Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

    Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

     

    Posting your mod as a GitHub Repo:

    Spoiler

    When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

    When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

     

    1. Open a command prompt (CMD, Powershell, Terminal, etc).
    2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
    3. Run the following commands:
      1. git init
      2. git remote add origin [Your Repository's URL]
        • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
      3. git fetch
      4. git checkout --track origin/master
      5. git stage *
      6. git commit -m "[Your commit message]"
      7. git push
    4. Navigate to GitHub and you should now see most of the files.
      • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
    5. Now you can share your GitHub link with those who you are asking for help.

    [Workaround line, please ignore]

     

  • Quote

    When you say in installs 1.12.2, did you already have Forge for 1.12.2 installed? Keep in mind that only the first installation of Forge creates a launcher profile, after that Forge just installs itself as a Minecraft version that a launcher profile can use.

    This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

     

    As the most common issue I feel I should put this outside the main bulk:

    The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

    If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

     

    For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

    Spoiler

    Logs (Most issues require logs to diagnose):

    Spoiler

    Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

    https://gist.github.com/: 100MB Requires member (Free)

    https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

    https://hastebin.com/: 400KB

    Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

     

    What to provide:

    ...for Crashes and Runtime issues:

    Minecraft 1.14.4 and newer:

    Post debug.log

    Older versions:

    Please update...

     

    ...for Installer Issues:

    Post your installer log, found in the same place you ran the installer

    This log will be called either installer.log or named the same as the installer but with .log on the end

    Note for Windows users:

    Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

     

    Where to get it:

    Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

     

    Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

    Spoiler
    1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
    2. Make a launcher profile targeting this version of Forge.
    3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
    4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

    Video:

    Spoiler

     

     

     

    or alternately, 

     

    Fallback ("No logs are generated"):

    If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

     

    Server Not Starting:

    Spoiler

    If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

     

    Reporting Illegal/Inappropriate Adfocus Ads:

    Spoiler

    Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

    Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

     

    Posting your mod as a GitHub Repo:

    Spoiler

    When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

    When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

     

    1. Open a command prompt (CMD, Powershell, Terminal, etc).
    2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
    3. Run the following commands:
      1. git init
      2. git remote add origin [Your Repository's URL]
        • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
      3. git fetch
      4. git checkout --track origin/master
      5. git stage *
      6. git commit -m "[Your commit message]"
      7. git push
    4. Navigate to GitHub and you should now see most of the files.
      • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
    5. Now you can share your GitHub link with those who you are asking for help.

    [Workaround line, please ignore]

     

  • Quote
    • Author
    1 hour ago, DaemonUmbra said:

    When you say in installs 1.12.2, did you already have Forge for 1.12.2 installed? Keep in mind that only the first installation of Forge creates a launcher profile, after that Forge just installs itself as a Minecraft version that a launcher profile can use.

    Forge doesn't create the actual 1.13.2 version, it just creates another 1.12.2 version

  • Quote

    Open the version list and take a screenshot

    This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

     

    As the most common issue I feel I should put this outside the main bulk:

    The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

    If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

     

    For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

    Spoiler

    Logs (Most issues require logs to diagnose):

    Spoiler

    Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

    https://gist.github.com/: 100MB Requires member (Free)

    https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

    https://hastebin.com/: 400KB

    Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

     

    What to provide:

    ...for Crashes and Runtime issues:

    Minecraft 1.14.4 and newer:

    Post debug.log

    Older versions:

    Please update...

     

    ...for Installer Issues:

    Post your installer log, found in the same place you ran the installer

    This log will be called either installer.log or named the same as the installer but with .log on the end

    Note for Windows users:

    Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

     

    Where to get it:

    Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

     

    Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

    Spoiler
    1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
    2. Make a launcher profile targeting this version of Forge.
    3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
    4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

    Video:

    Spoiler

     

     

     

    or alternately, 

     

    Fallback ("No logs are generated"):

    If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

     

    Server Not Starting:

    Spoiler

    If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

     

    Reporting Illegal/Inappropriate Adfocus Ads:

    Spoiler

    Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

    Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

     

    Posting your mod as a GitHub Repo:

    Spoiler

    When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

    When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

     

    1. Open a command prompt (CMD, Powershell, Terminal, etc).
    2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
    3. Run the following commands:
      1. git init
      2. git remote add origin [Your Repository's URL]
        • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
      3. git fetch
      4. git checkout --track origin/master
      5. git stage *
      6. git commit -m "[Your commit message]"
      7. git push
    4. Navigate to GitHub and you should now see most of the files.
      • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
    5. Now you can share your GitHub link with those who you are asking for help.

    [Workaround line, please ignore]

     

  • Quote

    No, the versions list in the client.
    Oh wait, you are missing folders, can you provide the direct link to the file?

    Edited by DaemonUmbra

    This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

     

    As the most common issue I feel I should put this outside the main bulk:

    The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

    If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

     

    For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

    Spoiler

    Logs (Most issues require logs to diagnose):

    Spoiler

    Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

    https://gist.github.com/: 100MB Requires member (Free)

    https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

    https://hastebin.com/: 400KB

    Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

     

    What to provide:

    ...for Crashes and Runtime issues:

    Minecraft 1.14.4 and newer:

    Post debug.log

    Older versions:

    Please update...

     

    ...for Installer Issues:

    Post your installer log, found in the same place you ran the installer

    This log will be called either installer.log or named the same as the installer but with .log on the end

    Note for Windows users:

    Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

     

    Where to get it:

    Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

     

    Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

    Spoiler
    1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
    2. Make a launcher profile targeting this version of Forge.
    3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
    4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

    Video:

    Spoiler

     

     

     

    or alternately, 

     

    Fallback ("No logs are generated"):

    If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

     

    Server Not Starting:

    Spoiler

    If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

     

    Reporting Illegal/Inappropriate Adfocus Ads:

    Spoiler

    Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

    Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

     

    Posting your mod as a GitHub Repo:

    Spoiler

    When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

    When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

     

    1. Open a command prompt (CMD, Powershell, Terminal, etc).
    2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
    3. Run the following commands:
      1. git init
      2. git remote add origin [Your Repository's URL]
        • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
      3. git fetch
      4. git checkout --track origin/master
      5. git stage *
      6. git commit -m "[Your commit message]"
      7. git push
    4. Navigate to GitHub and you should now see most of the files.
      • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
    5. Now you can share your GitHub link with those who you are asking for help.

    [Workaround line, please ignore]

     

  • Quote
    • Author
    4 hours ago, DaemonUmbra said:

    No, the versions list in the client.
    Oh wait, you are missing folders, can you provide the direct link to the file?

    the forge file I'm downloading? This is the link I'm downloading it from: http://d2hhdupnijvtm1.cloudfront.net/1fhta_7wabw2d/forge-installer.exe

    Edited by diesieben07
    redacted link

  • Quote
    • Author
    12 hours ago, diesieben07 said:

    That is NOT the official website. You probably downloaded malware or whatever else. Whatever it is, it is not the Forge installer.

    The Forge installer must be downloaded from https://files.minecraftforge.net/.

    that's the site I download it from. I literally just typed forge into google and it's the first link. Exact same url. That link is the link that downloads the files, copied straight from the website.

  • Quote

    Could you take a screenshot of the page, chuck the screenshot into paint, and circle the button you clicked to get that link?

    This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

     

    As the most common issue I feel I should put this outside the main bulk:

    The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

    If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

     

    For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

    Spoiler

    Logs (Most issues require logs to diagnose):

    Spoiler

    Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

    https://gist.github.com/: 100MB Requires member (Free)

    https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

    https://hastebin.com/: 400KB

    Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

     

    What to provide:

    ...for Crashes and Runtime issues:

    Minecraft 1.14.4 and newer:

    Post debug.log

    Older versions:

    Please update...

     

    ...for Installer Issues:

    Post your installer log, found in the same place you ran the installer

    This log will be called either installer.log or named the same as the installer but with .log on the end

    Note for Windows users:

    Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

     

    Where to get it:

    Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

     

    Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

    Spoiler
    1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
    2. Make a launcher profile targeting this version of Forge.
    3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
    4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

    Video:

    Spoiler

     

     

     

    or alternately, 

     

    Fallback ("No logs are generated"):

    If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

     

    Server Not Starting:

    Spoiler

    If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

     

    Reporting Illegal/Inappropriate Adfocus Ads:

    Spoiler

    Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

    Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

     

    Posting your mod as a GitHub Repo:

    Spoiler

    When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

    When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

     

    1. Open a command prompt (CMD, Powershell, Terminal, etc).
    2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
    3. Run the following commands:
      1. git init
      2. git remote add origin [Your Repository's URL]
        • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
      3. git fetch
      4. git checkout --track origin/master
      5. git stage *
      6. git commit -m "[Your commit message]"
      7. git push
    4. Navigate to GitHub and you should now see most of the files.
      • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
    5. Now you can share your GitHub link with those who you are asking for help.

    [Workaround line, please ignore]

     

  • Quote
    • Author
    22 minutes ago, DaemonUmbra said:

    Could you take a screenshot of the page, chuck the screenshot into paint, and circle the button you clicked to get that link?

    Ok no I'm wrong. Double checked and it seems to be a different: https://www.minecraft-downloads.com/download/forge/#1.13.2

     

    the official site doesn't have a windows installer version for me https://gyazo.com/09f42b0f73745bd67447daa00f708206

     

    I've been downloading from the wrong website which explains why it's installing the wrong version. I can't do anything with the version I download from the official site though since it's not a .jar I can run.

     

    Edited by diesieben07
    removed link

  • Quote
    • Author
    16 minutes ago, diesieben07 said:

    I highly recommend to install the browser extension from https://stopmodreposts.org/ as it will warn you about such sites.

    If you cannot run jar files by double-clicking them, you can fix that using Jarfix.

    no I mean it comes in the form of a bunch of compressed files. There is no .jar for me to run

  • Quote

    • Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
    Reply to this topic...
    Go to topic listing

    Important Information

    By using this site, you agree to our Terms of Use.

    I accept

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.