Jump to content
Currently supported: All versions

Does mods work with existing multiplayer worlds?

Des

By Des
in General Discussion

 Share

Recommended Posts

Des Tree Puncher

Des

Posted
Posted

Hi all, I have just installed forge and a lucky block mod but am unsure if the new mod will work with my current multiplayer server with my friends on it. Anyone able to advise me on this? I couldnt find any support from old threads in "Modder Support" too... I have attached some ss for referencing if anyone needs it.

Capture2.PNG

Capture3.PNG

Capture4.PNG

Capture5.PNG

Capture1.png

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

That's a Spigot server, not a Forge server... modded blocks will not work on a non-Forge server

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Des Tree Puncher

Des

Posted
  • Author
Posted
26 minutes ago, DaemonUmbra said:

That's a Spigot server, not a Forge server... modded blocks will not work on a non-Forge server

Hey DaemonUmbra, thanks for the reply!

 

I managed to duplicate the Spigot server and created a new multiplayer test server and it was able to let me use the mod... ☹️

Or maybe I had somehow managed to create a Forge server using a Spigot-1.13.2.jar file?

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

More likely the client component of the mod is showing you the modded blocks and items in the creative menu because you have the mods installed on your client, but as soon as you join the server and try to spawn blocks or items from the mods it won't work.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Des Tree Puncher

Des

Posted
  • Author
Posted
6 hours ago, DaemonUmbra said:

More likely the client component of the mod is showing you the modded blocks and items in the creative menu because you have the mods installed on your client, but as soon as you join the server and try to spawn blocks or items from the mods it won't work.

I see... Are there any ways for me to change out the server/extract out my data and use it on a Forge server? I doubt that there will be any workaround since there is already so much progress right? 

 

As for creating a Forge server, do I just use the generic run.bat file? 

@ECHO OFF
java -Xms3096M -Xmx3096M -jar minecraft_server.jar nogui
pause
Des Tree Puncher

Des

Posted
  • Author
Posted
4 hours ago, diesieben07 said:

A spigot world should just be a vanilla world, so Forge should be open it just fine (not the other way around though). Make backups though.

 

You must start the Forge jar that's generated by the installer. minecraft_server.jar always starts a vanilla server.

Hey diesieben07 thanks for the clarification too.

 

Can I then just replace the spigot jar file with the forge jar file? Will that enable my current worlds to be able to use the lucky block mod?

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

It sounds like you're trying to use Spigot plugins with Forge mods, I would recommend you use Sponge if you need to use plugins because it is designed to work with Forge to a degree.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



  • Recently Browsing

    • No registered users viewing this page.

  • Posts

    • Ugdhar
      having trouble installing forge

      By Ugdhar · Posted

      Please post logs as described in the FAQ (https://forums.minecraftforge.net/topic/125488-rules-and-frequently-asked-questions-faq/), they will contain information that may help.  
    • packetdesyncing
      How to modify player head pitch?

      By packetdesyncing · Posted

      I've been trying to find a solution for this for the past few days and cant seem to find it anywhere.   What i want to do is basically set my player's head pitch without the server noticing it. Basically client-side change.   Is there a way to do this? With mixins or anything else?   Thanks in advance.
    • Atomic.Bearry
      Forge on minecraft client wont start

      By Atomic.Bearry · Posted

      Did you ever find a solution to this
    • DroidCrafter23
      WorldGen: Files not generating

      By DroidCrafter23 · Posted

      I have followed a tutorial on how to generate ores for my mod though the data files have not been generated despite me running data in my IDE.  I have looked over and compared my code multiple times and the only differences are either with the IDs or with unnecessary code because of what my mod is (The mod is for the End so I don't need the Overworld or Nether ores), my folders are all in the right structure and no warnings are present when ran. I have been trying to figure this out for a few days now so help would be much appreciated.  The tutorial I was following.  My code -  public class ModBiomeModifiers { public static final ResourceKey<BiomeModifier> ADD_GAZITE_ORE = registerKey("add_gazite_ore"); public static final ResourceKey<BiomeModifier> TRANSCENDINE_GAZITE_ORE = registerKey("add_transcendine_ore"); public static void bootstrap(BootstrapContext<BiomeModifier> context) { var placedFeature = context.lookup(Registries.PLACED_FEATURE); var biomes = context.lookup(Registries.BIOME); context.register(ADD_GAZITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_END), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.GAZITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); context.register(TRANSCENDINE_GAZITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_END), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.TRANSCENDINE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); } private static ResourceKey<BiomeModifier> registerKey(String name) { return ResourceKey.create(ForgeRegistries.Keys.BIOME_MODIFIERS, ResourceLocation.fromNamespaceAndPath(EchoingEnd.MOD_ID, name)); } } The tutorial's code -  public class ModBiomeModifiers { public static final ResourceKey<BiomeModifier> ADD_ALEXANDRITE_ORE = registerKey("add_alexandrite_ore"); public static final ResourceKey<BiomeModifier> ADD_NETHER_ALEXANDRITE_ORE = registerKey("add_nether_alexandrite_ore"); public static final ResourceKey<BiomeModifier> ADD_END_ALEXANDRITE_ORE = registerKey("add_end_alexandrite_ore"); public static void bootstrap(BootstrapContext<BiomeModifier> context) { var placedFeature = context.lookup(Registries.PLACED_FEATURE); var biomes = context.lookup(Registries.BIOME); context.register(ADD_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_OVERWORLD), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.ALEXANDRITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); // Individual Biomes // context.register(ADD_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( // HolderSet.direct(biomes.getOrThrow(Biomes.PLAINS), biomes.getOrThrow(Biomes.BAMBOO_JUNGLE)), // HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.ALEXANDRITE_ORE_PLACED_KEY)), // GenerationStep.Decoration.UNDERGROUND_ORES)); context.register(ADD_NETHER_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_NETHER), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.NETHER_ALEXANDRITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); context.register(ADD_END_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_END), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.END_ALEXANDRITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); } private static ResourceKey<BiomeModifier> registerKey(String name) { return ResourceKey.create(ForgeRegistries.Keys.BIOME_MODIFIERS, ResourceLocation.fromNamespaceAndPath(TutorialMod.MOD_ID, name)); } }   ModConfiguredFeatures:   My code -  public class ModConfiguredFeatures { public static final ResourceKey<ConfiguredFeature<?, ?>> GAZITE_ORE_KEY = registerKey("gazite_ore"); public static final ResourceKey<ConfiguredFeature<?, ?>> TRANSCENDINE_ORE_KEY = registerKey("transcendine_ore"); public static void bootstrap(BootstrapContext<ConfiguredFeature<?, ?>> context) { RuleTest endReplaceables = new BlockMatchTest(Blocks.END_STONE); register(context, GAZITE_ORE_KEY, Feature.ORE, new OreConfiguration(endReplaceables, ModBlocks.GAZITE_ORE.get().defaultBlockState(), 4)); register(context, TRANSCENDINE_ORE_KEY, Feature.ORE, new OreConfiguration(endReplaceables, ModBlocks.TRANSCENDINE_ORE.get().defaultBlockState(), 8)); List<OreConfiguration.TargetBlockState> EndOres = List.of( OreConfiguration.target(endReplaceables, ModBlocks.GAZITE_ORE.get().defaultBlockState()), OreConfiguration.target(endReplaceables, ModBlocks.TRANSCENDINE_ORE.get().defaultBlockState())); } public static ResourceKey<ConfiguredFeature<?, ?>> registerKey(String name) { return ResourceKey.create(Registries.CONFIGURED_FEATURE, ResourceLocation.fromNamespaceAndPath(EchoingEnd.MOD_ID, name)); } private static <FC extends FeatureConfiguration, F extends Feature<FC>> void register(BootstrapContext<ConfiguredFeature<?, ?>> context, ResourceKey<ConfiguredFeature<?, ?>> key, F feature, FC configuration) { context.register(key, new ConfiguredFeature<>(feature, configuration)); } }   The tutorial's code - public class ModConfiguredFeatures { public static final ResourceKey<ConfiguredFeature<?, ?>> OVERWORLD_ALEXANDRITE_ORE_KEY = registerKey("alexandrite_ore"); public static final ResourceKey<ConfiguredFeature<?, ?>> NETHER_ALEXANDRITE_ORE_KEY = registerKey("nether_alexandrite_ore"); public static final ResourceKey<ConfiguredFeature<?, ?>> END_ALEXANDRITE_ORE_KEY = registerKey("end_alexandrite_ore"); public static void bootstrap(BootstrapContext<ConfiguredFeature<?, ?>> context) { RuleTest stoneReplaceables = new TagMatchTest(BlockTags.STONE_ORE_REPLACEABLES); RuleTest deepslateReplaceables = new TagMatchTest(BlockTags.DEEPSLATE_ORE_REPLACEABLES); RuleTest netherrackReplaceables = new BlockMatchTest(Blocks.NETHERRACK); RuleTest endReplaceables = new BlockMatchTest(Blocks.END_STONE); List<OreConfiguration.TargetBlockState> overworldAlexandriteOres = List.of( OreConfiguration.target(stoneReplaceables, ModBlocks.ALEXANDRITE_ORE.get().defaultBlockState()), OreConfiguration.target(deepslateReplaceables, ModBlocks.ALEXANDRITE_DEEPSLATE_ORE.get().defaultBlockState())); register(context, OVERWORLD_ALEXANDRITE_ORE_KEY, Feature.ORE, new OreConfiguration(overworldAlexandriteOres, 9)); register(context, NETHER_ALEXANDRITE_ORE_KEY, Feature.ORE, new OreConfiguration(netherrackReplaceables, ModBlocks.ALEXANDRITE_NETHER_ORE.get().defaultBlockState(), 9)); register(context, END_ALEXANDRITE_ORE_KEY, Feature.ORE, new OreConfiguration(endReplaceables, ModBlocks.ALEXANDRITE_END_ORE.get().defaultBlockState(), 9)); } public static ResourceKey<ConfiguredFeature<?, ?>> registerKey(String name) { return ResourceKey.create(Registries.CONFIGURED_FEATURE, ResourceLocation.fromNamespaceAndPath(TutorialMod.MOD_ID, name)); } private static <FC extends FeatureConfiguration, F extends Feature<FC>> void register(BootstrapContext<ConfiguredFeature<?, ?>> context, ResourceKey<ConfiguredFeature<?, ?>> key, F feature, FC configuration) { context.register(key, new ConfiguredFeature<>(feature, configuration)); } }   ModPlacedFeatures:   My code - public class ModPlacedFeatures { public static final ResourceKey<PlacedFeature> GAZITE_ORE_PLACED_KEY = registerKey("gazite_ore_placed"); public static final ResourceKey<PlacedFeature> TRANSCENDINE_ORE_PLACED_KEY = registerKey("transcendine_ore_placed"); public static void bootstrap(BootstrapContext<PlacedFeature> context) { var configuredFeatures = context.lookup(Registries.CONFIGURED_FEATURE); register(context, GAZITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.GAZITE_ORE_KEY), ModOrePlacement.commonOrePlacement(9, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(71)))); register(context, TRANSCENDINE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.GAZITE_ORE_KEY), ModOrePlacement.rareOrePlacement(6, HeightRangePlacement.uniform(VerticalAnchor.absolute(-32), VerticalAnchor.absolute(71)))); } private static ResourceKey<PlacedFeature> registerKey(String name) { return ResourceKey.create(Registries.PLACED_FEATURE, ResourceLocation.fromNamespaceAndPath(EchoingEnd.MOD_ID, name)); } private static void register(BootstrapContext<PlacedFeature> context, ResourceKey<PlacedFeature> key, Holder<ConfiguredFeature<?, ?>> configuration, List<PlacementModifier> modifiers) { context.register(key, new PlacedFeature(configuration, List.copyOf(modifiers))); } }   the tutorial's code -  public class ModPlacedFeatures { public static final ResourceKey<PlacedFeature> ALEXANDRITE_ORE_PLACED_KEY = registerKey("alexandrite_ore_placed"); public static final ResourceKey<PlacedFeature> NETHER_ALEXANDRITE_ORE_PLACED_KEY = registerKey("nether_alexandrite_ore_placed"); public static final ResourceKey<PlacedFeature> END_ALEXANDRITE_ORE_PLACED_KEY = registerKey("end_alexandrite_ore_placed"); public static void bootstrap(BootstrapContext<PlacedFeature> context) { var configuredFeatures = context.lookup(Registries.CONFIGURED_FEATURE); register(context, ALEXANDRITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.OVERWORLD_ALEXANDRITE_ORE_KEY), ModOrePlacement.commonOrePlacement(12, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(80)))); register(context, NETHER_ALEXANDRITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.NETHER_ALEXANDRITE_ORE_KEY), ModOrePlacement.commonOrePlacement(12, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(80)))); register(context, END_ALEXANDRITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.END_ALEXANDRITE_ORE_KEY), ModOrePlacement.commonOrePlacement(12, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(80)))); } private static ResourceKey<PlacedFeature> registerKey(String name) { return ResourceKey.create(Registries.PLACED_FEATURE, ResourceLocation.fromNamespaceAndPath(TutorialMod.MOD_ID, name)); } private static void register(BootstrapContext<PlacedFeature> context, ResourceKey<PlacedFeature> key, Holder<ConfiguredFeature<?, ?>> configuration, List<PlacementModifier> modifiers) { context.register(key, new PlacedFeature(configuration, List.copyOf(modifiers))); } }   ModOrePlacement:   My code -  public class ModOrePlacement { public static List<PlacementModifier> orePlacement(PlacementModifier pCountPlacement, PlacementModifier pHeightRange) { return List.of(pCountPlacement, InSquarePlacement.spread(), pHeightRange, BiomeFilter.biome()); } public static List<PlacementModifier> commonOrePlacement(int pCount, PlacementModifier pHeightRange) { return orePlacement(CountPlacement.of(pCount), pHeightRange); } public static List<PlacementModifier> rareOrePlacement(int pChance, PlacementModifier pHeightRange) { return orePlacement(RarityFilter.onAverageOnceEvery(pChance), pHeightRange); } }   The tutorial's code -  public class ModOrePlacement { public static List<PlacementModifier> orePlacement(PlacementModifier pCountPlacement, PlacementModifier pHeightRange) { return List.of(pCountPlacement, InSquarePlacement.spread(), pHeightRange, BiomeFilter.biome()); } public static List<PlacementModifier> commonOrePlacement(int pCount, PlacementModifier pHeightRange) { return orePlacement(CountPlacement.of(pCount), pHeightRange); } public static List<PlacementModifier> rareOrePlacement(int pChance, PlacementModifier pHeightRange) { return orePlacement(RarityFilter.onAverageOnceEvery(pChance), pHeightRange); } }  
    • MarkSDR
      Error when trying to connect to a local server: java.lang.negativearraysizeexception -1

      By MarkSDR · Posted

      I'm creating a modpack, and i just discovered that if i try to connect to a server it gives the error: Internal Exception: io.netty.handler.codec.DecoderException: java.lang.negativearraysizeexception -1   The client log:  

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept