Posted October 6, 20196 yr When i downloaded the 1.12.2 - 14.23.5.2847 version of forge i have been having non stop crashes, plus when i try to install an older version of forge it will not allow me to. When it crashed it never made a crash report until now and i saw that two core mods were on the list at the very top so i investigated those mods and after i deleted them, it still was crashing. so i decided to see what would happen if i took all the mods out of the game to see what would happen. It booted the game like normal,and when then I started a NEW world with no mods in it, just forge, and after two seconds of being in the world it crashed again! i know that it's none of my mods that are causing the game to crash, its forge. here is that aforementioned crash report. minecraft forge crash report.txt Edited October 6, 20196 yr by TaturrTott
October 6, 20196 yr Author i was just doing some more investigating and found that if i put even one mod in like optifine for example, it will crash. this is the report i got from it. crash-2019-10-06_10.45.46-client.txt Edited October 6, 20196 yr by TaturrTott
October 6, 20196 yr Author sorry but it still stands that even with only one mod installed it will crash.
October 6, 20196 yr Author I am having the same problem, except mine will crash even without any mods installed.
October 6, 20196 yr Author I ran 1.14.4 recently and i am having the same problem. even with no mods it will boot up, load into a world for 10 seconds and then crash.
October 6, 20196 yr Please do not hijack other people's threads, if you have an issue make your own thread and include logs Edit: You already did, moving this to your thread. Edited October 6, 20196 yr by DaemonUmbra This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
October 6, 20196 yr Provide a log with just Forge This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
October 7, 20196 yr Please provide debug.log This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.