Skore Posted December 16, 2019 Posted December 16, 2019 Não foi possível baixar o arquivo, o conteúdo é diferente do esperado. Nome: jna-4.4.0.jar URL: https://libraries.minecraft.net/net/java/dev/jna/jna/4.4.0/jna-4.4.0.jar Nome do arquivo no disco: jna-4.4.0.jar Caminho: C:\Users\usuario\Twitch\Minecraft\Install\libraries\net\java\dev\jna\jna\4.4.0\jna-4.4.0.jar Existe: File Quote
DaemonUmbra Posted December 16, 2019 Posted December 16, 2019 Quote This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Reveal hidden contents Logs (Most issues require logs to diagnose): Reveal hidden contents Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Reveal hidden contents Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Reveal hidden contents or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Reveal hidden contents If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Reveal hidden contents Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Reveal hidden contents When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Skore Posted December 16, 2019 Author Posted December 16, 2019 On 12/16/2019 at 3:20 AM, DaemonUmbra said: Expand Were can I dowloado the file? I haven't found it in the page... And where do I need to put the file? At the same folder of jna-4.4.0.jar? Quote
DaemonUmbra Posted December 16, 2019 Posted December 16, 2019 The error tells you where the file is, and you're replacing the bad file with a good one Quote This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Reveal hidden contents Logs (Most issues require logs to diagnose): Reveal hidden contents Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Reveal hidden contents Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Reveal hidden contents or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Reveal hidden contents If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Reveal hidden contents Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Reveal hidden contents When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Skore Posted December 16, 2019 Author Posted December 16, 2019 On 12/16/2019 at 3:40 AM, DaemonUmbra said: The error tells you where the file is, and you're replacing the bad file with a good one Expand Ok, the file is at the first link you sent? I can't found it there... Quote
DaemonUmbra Posted December 16, 2019 Posted December 16, 2019 Quote This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Reveal hidden contents Logs (Most issues require logs to diagnose): Reveal hidden contents Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Reveal hidden contents Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Reveal hidden contents or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Reveal hidden contents If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Reveal hidden contents Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Reveal hidden contents When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
z4gsnwl Posted December 16, 2019 Posted December 16, 2019 (edited) when i try to launch skyfactory 4 it crashes before anything can start up https://pastebin.com/ZqSf5Ste Edited December 16, 2019 by z4gsnwl Quote
Skore Posted December 16, 2019 Author Posted December 16, 2019 On 12/16/2019 at 4:00 AM, DaemonUmbra said: Expand Thanks!!! It works, thaks a lot! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.