Jump to content

Recommended Posts

Posted

What launcher are you using? Please provide a screenshot.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted

1.12 is no longer supported on this forum.

Please update to a modern version of Minecraft to receive support.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Guest
This topic is now closed to further replies.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • Please read the FAQ and post logs as described there.
    • Upon starting the server I get; [main/ERROR] [minecraft/Main]: Failed to start the minecraft server net.minecraftforge.fml.LoadingFailedException: Loading errors encountered: [     Framework (framework) has failed to load correctly §7java.lang.NoClassDefFoundError: net/minecraft/client/gui/components/toasts/Toast ] I suspect there is a (possibly a few) client-only mods installed on my server. Any help would be appreciated! (Yes I know there are a lot of mods...) Here is the crash log:   https://paste.ee/p/pRz5mhMl#s=0
    • That's basically what the failure does, my apologies for failing to specify.  It just tries again on the next tick until it detects the entities for that chunk are loaded, and then tries to load the entity.  From there it gets into different failure states depending on what goes wrong, but in short, if the entity fails to load once the entity list becomes available, the request is cleared and must be resubmitted by the end user.  There should be few cases where that actually happens. Yes, that is my understanding of forceloading.  That's why on a successful summon, it removes the forceload.  Otherwise it does just leave the chunks loaded long term. Thank you for your help, any knowledge is useful!  I don't often mess with forceloading and my prior experience is 1.16 so I'm also a bit out of my depth haha.
    • I will have to do more research about 1.18 chunk loading. You were unclear about how your code manages with the entity load failure. If you simply used a loop, I suggest submitting a tick task to the next tick which does the same thing, checking if the entities are loaded and if so teleporting the right one else submitting another tick task etc. Also I think forceloading permanently force loads the chunk, and it only starts to unload when you make a subsequent call to mark the chunk as not forceloaded. I may be completely wrong, I dont know much about 1.18, most of my experience is 1.20. Good luck I hope you figure it out after all this time 😅
    • i managed to fix it by reinstalling the modpack and re-add all the extra mods I've had previously.
  • Topics

  • Who's Online (See full list)

    • There are no registered users currently online
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.