Jump to content

When I put projects for the existing project into workspace there is no projects showing.


Recommended Posts

Are you trying to make a mod or contribute to Forge?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • Hi! If you have your forge installation file not in the system disc on PC (D, E etc.), drag it to disk C and try to start again. In my case it solved the problem.
    • KILAT77 : Waspada Situs Scam dengan Withdraw Yang Tidak Dibayar Di era digital saat ini, banyak orang yang mencari keberuntungan melalui situs perjudian online. Namun, dibalik gemerlap janji-janji manis kemenangan, ada bahaya yang mengintai. Salah satu situs yang patut diwaspadai adalah KILAT77. Situs ini mendapat reputasi buruk karena banyak laporan dari pengguna yang mengklaim bahwa mereka tidak bisa menarik dana kemenangan mereka. Dalam artikel ini, kita akan membahas mengapa ROTER88 dianggap sebagai situs scam dan bagaimana Anda bisa melindungi diri dari penipuan serupa. Pengalaman Pengguna: Penarikan Tidak Dibayar Beberapa pengguna telah melaporkan pengalaman buruk mereka dengan KILAT77. Mereka mengaku bahwa setelah memenangkan sejumlah uang dan mencoba menariknya, proses penarikan mereka ditolak tanpa alasan yang jelas. Bahkan, beberapa pengguna melaporkan bahwa akun mereka tiba-tiba diblokir setelah mencoba melakukan penarikan, sehingga mereka kehilangan akses ke dana mereka sama sekali.
    • It is a dupe mod issue Remove Rubidium - you are already using Embeddium which is a fork of Rubidium
    • I made a block entity in forge 1.20.1, I want to prevent hopper from taking input slot item, i tried to override the extractItem method, it prevented hopper from taking input slot item, but the player also unable to take/change the item in input slot unless the slot is empty. public class FluidSeparatorBlockEntity extends BlockEntity implements MenuProvider { private static final int INPUT_SLOT = 0; private final CustomItemHandler itemHandler = new CustomItemHandler(3){ @Override protected void onContentsChanged(int slot) { setChanged(); } @Override public boolean isItemValid(int slot, @NotNull ItemStack stack) { return slot == INPUT_SLOT; } @Override public @NotNull ItemStack extractItem(int slot, int amount, boolean simulate) { if (slot == INPUT_SLOT) { return ItemStack.EMPTY; } return super.extractItem(slot, amount, simulate); } }; private LazyOptional<IItemHandler> lazyItemHandler = LazyOptional.empty(); protected final ContainerData data; private int progress = 0; private int maxProgress = 78; public FluidSeparatorBlockEntity(BlockPos pPos, BlockState pBlockState) { super(ModBlockEntities.FLUID_SEPARATOR_BE.get(), pPos, pBlockState); this.data = new ContainerData() { @Override public int get(int pIndex) { return switch (pIndex) { case 0 -> FluidSeparatorBlockEntity.this.progress; case 1, 2 -> FluidSeparatorBlockEntity.this.maxProgress; default -> 0; }; } @Override public void set(int pIndex, int pValue) { switch (pIndex) { case 0 -> FluidSeparatorBlockEntity.this.progress = pValue; case 1, 2 -> FluidSeparatorBlockEntity.this.maxProgress = pValue; } } @Override public int getCount() { return 3; } }; } @Override public @NotNull <T> LazyOptional<T> getCapability(@NotNull Capability<T> cap, @Nullable Direction side) { if(cap == ForgeCapabilities.ITEM_HANDLER) { return lazyItemHandler.cast(); } return super.getCapability(cap, side); } @Override public void onLoad() { super.onLoad(); lazyItemHandler = LazyOptional.of(() -> itemHandler); } @Override public void invalidateCaps() { super.invalidateCaps(); lazyItemHandler.invalidate(); } public void drops() { SimpleContainer inventory = new SimpleContainer(itemHandler.getSlots()); for(int i = 0; i < itemHandler.getSlots(); i++) { inventory.setItem(i, itemHandler.getStackInSlot(i)); } Containers.dropContents(this.level, this.worldPosition, inventory); } @Override public Component getDisplayName() { return Component.translatable("block.chemmaster.fluid_separator"); } @Nullable @Override public AbstractContainerMenu createMenu(int pContainerId, Inventory pPlayerInventory, Player pPlayer) { return new FluidSeparatorMenu(pContainerId, pPlayerInventory, this, this.data); } @Override protected void saveAdditional(CompoundTag pTag) { pTag.put("inventory", itemHandler.serializeNBT()); pTag.putInt("fluid_separator.progress", progress); super.saveAdditional(pTag); } @Override public void load(CompoundTag pTag) { super.load(pTag); itemHandler.deserializeNBT(pTag.getCompound("inventory")); progress = pTag.getInt("fluid_separator.progress"); } public void tick(Level pLevel, BlockPos pPos, BlockState pState) { ItemStack inputStack = this.itemHandler.getStackInSlot(INPUT_SLOT); if (inputStack.getCount() < 2) { resetProgress(); return; } if(hasRecipe()) { increaseCraftingProgress(); setChanged(pLevel, pPos, pState); if(hasProgressFinished()) { craftItem(); resetProgress(); } } else { resetProgress(); } } private void resetProgress() { progress = 0; } private void craftItem() { Optional<FluidSeparatingRecipe> recipe = getCurrentRecipe(); if (recipe.isPresent()) { List<ItemStack> results = recipe.get().getOutputs(); ItemStack inputStack = this.itemHandler.getStackInSlot(INPUT_SLOT); if (inputStack.getCount() < 2) { // If there are not enough items, do not proceed with crafting return; } // Extract the input item from the input slot this.itemHandler.internalExtractItem(INPUT_SLOT, 2, false); // Loop through each result item and find suitable output slots for (ItemStack result : results) { int outputSlot = findSuitableOutputSlot(result); if (outputSlot != -1) { this.itemHandler.setStackInSlot(outputSlot, new ItemStack(result.getItem(), this.itemHandler.getStackInSlot(outputSlot).getCount() + result.getCount())); } else { // Handle the case where no suitable output slot is found // This can be logging an error, throwing an exception, or any other handling logic System.err.println("No suitable output slot found for item: " + result); } } } } private int findSuitableOutputSlot(ItemStack result) { // Implement logic to find a suitable output slot for the given result // Return the slot index or -1 if no suitable slot is found for (int i = 0; i < this.itemHandler.getSlots(); i++) { // Ensure we do not place the output item in the input slot if (i == INPUT_SLOT) { continue; } ItemStack stackInSlot = this.itemHandler.getStackInSlot(i); if (stackInSlot.isEmpty() || (stackInSlot.getItem() == result.getItem() && stackInSlot.getCount() + result.getCount() <= stackInSlot.getMaxStackSize())) { return i; } } return -1; } private boolean hasRecipe() { Optional<FluidSeparatingRecipe> recipe = getCurrentRecipe(); if (recipe.isEmpty()) { return false; } List<ItemStack> results = recipe.get().getOutputs(); for (ItemStack result : results) { if (!canInsertAmountIntoOutputSlot(result) || !canInsertItemIntoOutputSlot(result.getItem())) { return false; } } return true; } private Optional<FluidSeparatingRecipe> getCurrentRecipe(){ SimpleContainer inventory = new SimpleContainer(this.itemHandler.getSlots()); for (int i = 0; i < itemHandler.getSlots(); i++) { inventory.setItem(i, this.itemHandler.getStackInSlot(i)); } return this.level.getRecipeManager().getRecipeFor(FluidSeparatingRecipe.Type.INSTANCE, inventory, level); } private boolean canInsertAmountIntoOutputSlot(ItemStack result) { for (int i = 1; i < this.itemHandler.getSlots(); i++) { ItemStack stackInSlot = this.itemHandler.getStackInSlot(i); if (stackInSlot.isEmpty() || (stackInSlot.getItem() == result.getItem() && stackInSlot.getCount() + result.getCount() <= stackInSlot.getMaxStackSize())) { return true; } } return false; } private boolean canInsertItemIntoOutputSlot(Item item) { for (int i = 1; i < this.itemHandler.getSlots(); i++) { ItemStack stackInSlot = this.itemHandler.getStackInSlot(i); if (stackInSlot.isEmpty() || stackInSlot.getItem() == item) { return true; } } return false; } private boolean hasProgressFinished() { return progress >= maxProgress; } private void increaseCraftingProgress() { progress++; } }  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.