Please read the rules and FAQ before starting a new topic

Constant crashing while trying to run modpack, Multicraft host interface.

Posted March 30, 20232 yr

Hello! You can call me Salium. I've been trying to get a modded forge server up and running for the last 5-6 hours and all my experimentation have come to a screeching halt.

I bought a server host from an outside party and through Multicraft, I began to add mods. The server loads a world when running forge alone without mods, so I am sure there is a mod causing the error. Is there any chance that through looking at the error codes I got, anyone would be able to help me? I know nothing about this and am running on the minimal tutorials I found on youtube and whatnot.

https://pastebin.com/icK5x87E

That pastebin is the most recent error code. My discord is saladeen#6115 if you'd like more convenient communication.

Quote

March 30, 20232 yr

Quote

30.03 02:36:11 [Server] main/FATAL Mixin apply failed apoli.mixins.json:LivingEntityMixin -> net.minecraft.world.entity.LivingEntity: org.spongepowered.asm.mixin.injection.throwables.InvalidInjectionException @At("INVOKE") on net/minecraft/world/entity/LivingEntity::preventArmorDamaging with priority 1000 cannot inject into net/minecraft/world/entity/LivingEntity::m_21161_(Lnet/minecraft/world/damagesource/DamageSource;F)F merged by com.obscuria.obscureapi.mixin.LivingEntityMixin with priority 1287 [PREINJECT Applicator Phase -> apoli.mixins.json:LivingEntityMixin -> Prepare Injections -> -> redirect$zbb000$preventArmorDamaging(Lnet/minecraft/world/entity/LivingEntity;Lnet/minecraft/world/damagesource/DamageSource;F)V -> Prepare]

Conflict between apoli and obscureapi.

Check you have the latest versions of these mods then contact the mod authors.

Boilerplate:

If you don't post your logs/debug.log we can't help you. For curseforge you need to enable the forge debug.log in its minecraft settings. You should also post your crash report if you have one.

If there is no error in the log file and you don't have a crash report then post the launcher_log.txt from the minecraft folder. Again for curseforge this will be in your curseforge/minecraft/Install

Large files should be posted to a file sharing site like https://gist.github.com You should also read the support forum sticky post.

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

https://forums.minecraftforge.net/topic/122468-constant-crashing-while-trying-to-run-modpack-multicraft-host-interface/

Followers

Go to topic listing

IPS spam blocked by CleanTalk.

Announcements

How to change player renderer and transform model parts?

I have been trying for a while now to make a custom player renderer, and replace the vanilla player renderer with it. So far I've come up with a custom player renderer class that extends vanilla PlayerRenderer:
package com.FireDude123.BOTW.entity.renderer; import com.mojang.blaze3d.vertex.PoseStack; import net.minecraft.client.player.AbstractClientPlayer; import net.minecraft.client.renderer.MultiBufferSource; import net.minecraft.client.renderer.entity.player.PlayerRenderer; import net.minecraft.client.renderer.entity.EntityRendererProvider; import net.minecraftforge.client.event.RenderPlayerEvent; import net.minecraftforge.common.MinecraftForge; public class PoseablePlayerRenderer extends PlayerRenderer { public PoseablePlayerRenderer(EntityRendererProvider.Context ctx, boolean slim) { super(ctx, slim); System.out.println("here too"); } @Override public void render(AbstractClientPlayer p_117788_, float p_117789_, float p_117790_, PoseStack poseStack, MultiBufferSource p_117792_, int p_117793_) { System.out.println("didnt get here lol"); model.leftArm.xRot=(float)Math.toRadians(160); super.render(p_117788_, p_117789_, p_117790_, poseStack, p_117792_, p_117793_); } } As you can see, the intended purpose of this is to raise the player's left arm by 160 degrees. However, combined with this logic in ClientModEvents:
@Mod.EventBusSubscriber(modid = MODID, bus = Mod.EventBusSubscriber.Bus.MOD, value = Dist.CLIENT) public static class ClientModEvents { @SubscribeEvent public static void onClientSetup(FMLClientSetupEvent event) { EntityRenderers.register((EntityType<? extends AbstractClientPlayer>)(EntityType<?)EntityType.PLAYER, ctx -> new PoseablePlayerRenderer(ctx, true)); EntityRenderers.register(Entities.MAGNESIS_BLOCK.get(), com.FireDude123.BOTW.entity.renderer.BlockDisplayRenderer::new); EntityRenderers.register(Entities.REMOTE_BOMB.get(), ThrownItemRenderer::new); EntityRenderers.register(Entities.CRYONIS_ICE.get(), com.FireDude123.BOTW.entity.renderer.BlockDisplayRenderer::new); EntityRenderers.register(Entities.STASIS_BLOCK.get(), FallingBlockRenderer::new); } @SubscribeEvent public static void registerLayerDefinitions(EntityRenderersEvent.RegisterLayerDefinitions event) { event.registerLayerDefinition(new ModelLayerLocation(new ResourceLocation(BOTW.MODID, "paraglider"), "main"), ParagliderLayer::createBodyLayer); } }(I also have a paraglider layer here for something else, it's working perfectly fine, also I used the slim setting because the player is slim in 1.20.1 forge)
This logic isn't replacing the renderer, as far as I can tell. Can someone please advise as to why, and how to fix it?

By FireDude123 · Posted 15 hours ago15 hr
How to add my mob to another mod's biome in 1.20.1.

I'm on 1.20.1 and was wondering if there was a way to add a mob I am going to make to a other mod's biome (Regions Unexplored in this case). I am trying to figure this out before I start coding the mod. Could someone point me to a good guide on this? I saw some things about biome modifier's but all the resources are either to short, unhelpful or for a different version. Thanks in advance. (i am a beginner but i have java and modding knowledge so this isn't like a "i am new and don't know anything about coding" problem btw)

By ilov3gam3z · Posted 23 hours ago23 hr
Help with file conversion

Many Forge users seek help with file conversions. Similarly, managing your health can benefit from structured tools like the https://wellness-app.com/calculator/fasting-calculator/ and a free intermittent fasting calculator. These tools help you plan and personalize your fasting and eating windows based on your lifestyle and goals. By entering your preferred fasting duration and meal times, you receive a tailored schedule that makes intermittent fasting easier to follow. Just as mastering file conversions improves modding success, using a fasting calculator brings clarity and structure to your health routine, supporting better results over time.

By Brialeblanc · Yesterday at 10:34 AM1 day
Cobblemon invalid player data

Hi everyone, I keep getting "invalid player data" when trying to log onto my friend's server. Log analysis says to remove Night Lights and ImmediatelyFast, but that doesn't work. Any insight is appreciated

Log: https://mclo.gs/uj6pMkd

By CobbleDN · Posted Yesterday at 04:14 AM1 day
Bad pathfinding for big mobs (1.21.1)

I've struggled with this for way too long now, so I have decided to ask for some assistance here because there is almost no information about this online.

I made a hostile mob and I built it like this:
public static final Supplier<EntityType<Bunyip>> BUNYIP = ENTITY_TYPES.register("bunyip" , () -> EntityType.Builder. of(Bunyip::new, MobCategory.MONSTER).sized(3f, 2.5f).eyeHeight(1.75f).build("bunyip"));

However, I have discovered that a BoundingBox of 3 is too big for the vanilla pathfinding to work well. In fact, anything bigger than a block will not work well. This is especially noticeable when having it chase a player in a negative X and/or negative Z direction. The mob starts spinning, walking backwards, walking diagonally, etc.

I am using the Goal system:
protected void registerGoals() { super.registerGoals(); this.goalSelector.addGoal(1, new MeleeAttackGoal(this, 1.25, true)); this.targetSelector.addGoal(2, new NearestAttackableTargetGoal<>(this, Player.class, true, true)); }

This does not seem to be a me issue as the ravager, one of the biggest vanilla mobs, also struggles with proper pathfinding. I am a bit familiar with how Minecraft's pathfinding works, but not enough to make a pathfinding system from scratch (or at least not in a reasonable amount of time). Is there any way to fix this with some tweaks or will I have to make a custom pathfinding system?

By VictorEvers · Posted Tuesday at 08:42 PM1 day

Sign In

Constant crashing while trying to run modpack, Multicraft host interface.

Featured Replies

Join the conversation

Posts

How to change player renderer and transform model parts?

How to add my mob to another mod's biome in 1.20.1.

Help with file conversion

Cobblemon invalid player data

Bad pathfinding for big mobs (1.21.1)

Who's Online (See full list)

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)