Jump to content

[1.12] Can't figure out why my block doesn't render properly


weznon

Recommended Posts

The model in question: https://gist.github.com/Weznon/72a299489ba47f58689538b21138f4ae

 

The blockstate in question: https://gist.github.com/Weznon/95f991cc7baee9db98e08968b79d72e6

 

The end goal of the block is to have it's orientation change when placed to face the player, and then depending on 3 Boolean values, recolor 3 rectangles on the front block face using overlays.

So the front texture is

 koa3CZW.png

and when a certain boolean is true, the texture on the face of the block will turn to rhR7HRf.png

by setting an overlay texture to be a transparent texture with the purple rectangle.

 

When I load the world, I get

 wt2sd4t.png

 

 

I believe that the error is in my block model (might be wrong though), since when I changed the inventory variant to use a different block model the block rendered properly in my inventory.

 

I based the JSON off of the following post:

 

 

I have checked to make sure all the file names/locations are correct.

 

Thank you for the help, I've been stuck on this for a while and I can't figure out what's wrong.

Link to comment
Share on other sites

Post the log. There will always be an error in the log about failed models/textures/blockstates.

 

In addition, I notice that your blockstate has 48 possible states, of which only 16 can be encoded in metadata (i.e. without using a TileEntity). The rest need to be encoded in either world information ("there is a solid block under me") or in a TileEntity.

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable.  If you think this is the case, JUST REPORT ME.  Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

 

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

 

DO NOT PM ME WITH PROBLEMS. No help will be given.

Link to comment
Share on other sites

https://pastebin.com/wkeVU3Mp

 

Here is the log when i start up the client and load a world.

 

The booleans are encoded in a tile entity, and are recovered using an overrided getActualState. Only "facing" is stored in block metadata, the rest is in a tile entity. 

 

From looking through the log I don't see any errors, though I only gave it a cursory glance.

 

Edited by weznon
Link to comment
Share on other sites

Show how you register your models.

Don't PM me with questions. They will be ignored! Make a thread on the appropriate board for support.

 

1.12 -> 1.13 primer by williewillus.

 

1.7.10 and older versions of Minecraft are no longer supported due to it's age! Update to the latest version for support.

 

http://www.howoldisminecraft1710.today/

Link to comment
Share on other sites

package com.weznon.blink.block;

import net.minecraft.block.Block;
import net.minecraft.block.material.Material;
import net.minecraft.creativetab.CreativeTabs;
import net.minecraft.item.Item;
import net.minecraftforge.fml.common.registry.GameRegistry;
import net.minecraftforge.registries.IForgeRegistry;

public class ModBlocks {

    private static BlockHorde blockHorde = new BlockHorde().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockCounter blockCounter = new BlockCounter().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockTexture blockTexture = new BlockTexture().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockTextureFace blockTextureFace = new BlockTextureFace().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockBinaryCounter blockBinaryCounter = new BlockBinaryCounter().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockTextureBool blockTextureBool = new BlockTextureBool().setCreativeTab(CreativeTabs.MATERIALS);

    public static void register(IForgeRegistry<Block> registry) {
        registry.registerAll(
                blockHorde,
                blockCounter,
                blockTexture,
                blockTextureFace,
                blockBinaryCounter,
                blockTextureBool
        );

        GameRegistry.registerTileEntity(blockCounter.getTileEntityClass(), blockCounter.getRegistryName().toString());
        GameRegistry.registerTileEntity(blockBinaryCounter.getTileEntityClass(), blockBinaryCounter.getRegistryName().toString());

    }

    public static void registerItemBlocks(IForgeRegistry<Item> registry) {
        registry.registerAll(
                blockHorde.createItemBlock(),
                blockCounter.createItemBlock(),
                blockTexture.createItemBlock(),
                blockTextureFace.createItemBlock(),
                blockBinaryCounter.createItemBlock(),
                blockTextureBool.createItemBlock()
        );
    }

    public static void registerModels() {
        blockHorde.registerItemModel(Item.getItemFromBlock(blockHorde));
        blockCounter.registerItemModel(Item.getItemFromBlock(blockCounter));
        blockTexture.registerItemModel(Item.getItemFromBlock(blockTexture));
        blockTextureFace.registerItemModel(Item.getItemFromBlock(blockTextureFace));
        blockBinaryCounter.registerItemModel(Item.getItemFromBlock(blockBinaryCounter));
        blockTextureBool.registerItemModel(Item.getItemFromBlock(blockTextureBool));
    }

}

 

Above is where I do all the registration stuff for blocks

 

 

@Mod.EventBusSubscriber
    public static class RegistrationHandler {

        @SubscribeEvent
        public static void registerItems(RegistryEvent.Register<Item> event) {
            ModItems.register(event.getRegistry());
            ModBlocks.registerItemBlocks(event.getRegistry());

        }

        @SubscribeEvent
        public static void registerModels(ModelRegistryEvent event) {
            ModItems.registerModels();
            ModBlocks.registerModels();
        }

        @SubscribeEvent
        public static void registerBlocks(RegistryEvent.Register<Block> event) {
            ModBlocks.register(event.getRegistry());
        }
    }

Above is RegistrationHandler from my main mod class (Blink.java)

 

I have been following Shadowfacts modding tutorial, thats where i got this method of registering models

 

Source is at https://gitlab.com/weznon/minecraftBlink, just in case I forgot to paste anything.

 

All of the other blocks render properly

Edited by weznon
Link to comment
Share on other sites

I did some testing on my own and I I found the problem

 

In my block model JSON, i only had partially filled elements, ie 

{   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay", "tintindex": 0, "cullface": "north" },
      }
    }

In this JSON i dont define things to put on the other faces of the block

 

This caused the texture to go bad, you need to have all of the faces filled in. I made a blank texture and used that for all of the sides I do not want an overlay on.


 

{ "parent": "block/block",
  "elements": [
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#base",   "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "east" }
      }
    },
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay0", "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "east" }
      }
    },
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay0", "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "east" }
      }
    },
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay0", "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "east" }
      }
    }
  ]
}

 

is my blockmodel now and it works, some texture references are incorrect but the  gist is there.

 

thank you for the help

 

 

Edited by weznon
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • Perjudian online telah menjadi tren yang populer di kalangan penggemar permainan kasino. Salah satu permainan yang paling diminati adalah mesin slot online. Mesin slot online menawarkan kesenangan dan kegembiraan yang tak tertandingi, serta peluang untuk memenangkan hadiah besar. Salah satu situs slot online resmi yang menarik perhatian banyak pemain adalah Tuyul Slot. Kenapa Memilih Tuyul Slot? Tuyul Slot adalah situs slot online resmi yang menawarkan berbagai keuntungan bagi para pemainnya. Berikut adalah beberapa alasan mengapa Anda harus memilih Tuyul Slot: 1. Keamanan dan Kepercayaan Tuyul Slot adalah situs slot online resmi yang terpercaya dan memiliki reputasi yang baik di kalangan pemain judi online. Situs ini menggunakan teknologi keamanan terkini untuk melindungi data pribadi dan transaksi keuangan pemain. Anda dapat bermain dengan tenang dan yakin bahwa informasi Anda aman. 2. Pilihan Permainan yang Beragam Tuyul Slot menawarkan berbagai macam permainan slot online yang menarik. Anda dapat memilih dari ratusan judul permainan yang berbeda, dengan tema dan fitur yang beragam. Setiap permainan memiliki tampilan grafis yang menarik dan suara yang menghibur, memberikan pengalaman bermain yang tak terlupakan. 3. Kemudahan Menang Salah satu keunggulan utama dari Tuyul Slot adalah kemudahan untuk memenangkan hadiah. Situs ini menyediakan mesin slot online dengan tingkat pengembalian yang tinggi, sehingga peluang Anda untuk memenangkan hadiah besar lebih tinggi. Selain itu, Tuyul Slot juga menawarkan berbagai bonus dan promosi menarik yang dapat meningkatkan peluang Anda untuk menang. Cara Memulai Bermain di Tuyul Slot Untuk memulai bermain di Tuyul Slot, Anda perlu mengikuti langkah-langkah berikut: 1. Daftar Akun Kunjungi situs Tuyul Slot dan klik tombol "Daftar" untuk membuat akun baru. Isi formulir pendaftaran dengan informasi pribadi yang valid dan lengkap. Pastikan untuk memberikan data yang akurat dan jaga kerahasiaan informasi Anda. 2. Deposit Dana Setelah mendaftar, Anda perlu melakukan deposit dana ke akun Anda. Tuyul Slot menyediakan berbagai metode pembayaran yang aman dan terpercaya. Pilih metode yang paling nyaman untuk Anda dan ikuti petunjuk untuk melakukan deposit. 3. Pilih Permainan Setelah memiliki dana di akun Anda, Anda dapat memilih permainan slot online yang ingin Anda mainkan. Telusuri koleksi permainan yang tersedia dan pilih yang paling menarik bagi Anda. Anda juga dapat mencoba permainan secara gratis sebelum memasang taruhan uang sungguhan. 4. Mulai Bermain Saat Anda sudah memilih permainan, klik tombol "Main" untuk memulai permainan. Anda dapat mengatur jumlah taruhan dan jumlah garis pembayaran sesuai dengan preferensi Anda. Setelah itu, tekan tombol "Putar" dan lihat apakah Anda beruntung untuk memenangkan hadiah. Promosi dan Bonus Tuyul Slot menawarkan berbagai promosi dan bonus menarik kepada para pemainnya. Beberapa jenis promosi yang tersedia termasuk bonus deposit, cashback, dan turnamen slot. Pastikan untuk memanfaatkan promosi ini untuk meningkatkan peluang Anda memenangkan hadiah besar. Kesimpulan Tuyul Slot adalah situs slot online resmi yang menawarkan pengalaman bermain yang seru dan peluang menang yang tinggi. Dengan keamanan dan kepercayaan yang terjamin, berbagai pilihan permainan yang menarik, serta bonus dan promosi yang menguntungkan, Tuyul Slot menjadi pilihan yang tepat bagi para penggemar mesin slot online. Segera daftar akun dan mulai bermain di Tuyul Slot untuk kesempatan memenangkan hadiah besar!
    • I have been having a problem with minecraft forge. Any version. Everytime I try to launch it it always comes back with error code 1. I have tried launching from curseforge, from the minecraft launcher. I have also tried resetting my computer to see if that would help. It works on my other computer but that one is too old to run it properly. I have tried with and without mods aswell. Fabric works, optifine works, and MultiMC works aswell but i want to use forge. If you can help with this issue please DM on discord my # is Haole_Dawg#6676
    • Add the latest.log (logs-folder) with sites like https://paste.ee/ and paste the link to it here  
    • I have no idea how a UI mod crashed a whole world but HUGE props to you man, just saved me +2 months of progress!  
    • So i know for a fact this has been asked before but Render stuff troubles me a little and i didnt find any answer for recent version. I have a custom nausea effect. Currently i add both my nausea effect and the vanilla one for the effect. But the problem is that when I open the inventory, both are listed, while I'd only want mine to show up (both in the inv and on the GUI)   I've arrived to the GameRender (on joined/net/minecraft/client) and also found shaders on client-extra/assets/minecraft/shaders/post and client-extra/assets/minecraft/shaders/program but I'm lost. I understand that its like a regular screen, where I'd render stuff "over" the game depending on data on the server, but If someone could point to the right client and server classes that i can read to see how i can manage this or any tip would be apreciated
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.