Jump to content

Recommended Posts

Posted

Hello everyone.

I am running a forge modded server server on my computer with 2 GB of ram allocated (I have tried with 4 and it did not help). I connect to my server via localhost and everything is fine until my Brother joins on his laptop. When he joins using my local IP 192.168.0.7 the server's tps just goes way down near 5-10 and the world gets laggy. lag between block breaks, when he walks he teleports all over.

 

This is my start.bat

java -Xms2048m -Xmx2048m -Xmn512m -XX:TargetSurvivorRatio=80 -XX:MaxTenuringThreshold=15 -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:+DisableExplicitGC -XX:MaxGCPauseMillis=40 -XX:GCPauseIntervalMillis=150 -XX:+AggressiveOpts -XX:PermSize=1024m -XX:+TieredCompilation -XX:ReservedCodeCacheSize=2048m -XX:+UseCodeCacheFlushing -XX:CompileThreshold=1000 -jar forge-1.7.10-10.13.4.1614-1.7.10-universal.jar nogui
 

I am running a 1.7.10 Forge Server (forge 1.7.10-10.13.4.16.14-1.7.10-universal.jar to be exact)
I have the following mods server+client side:

https://imgur.com/a/YyTqPFT

(obviously do not have optifine, mousetweaks and other client mods on the server side)

 

I have tried installing Sampler to determine what was causing the issue and it said something about Chunk Update: Grass Tick

 

Also almost constantly when we are both connected my console is always outputting this:

 

[07:31:51] [Server thread/WARN]: Can't keep up! Did the system time change, or is the server overloaded? Running 2037ms behind, skipping 40 tick(s)
 

The running behind delay is anywhere from 50ms to 5000ms.

Not sure what is causing the low tps when he joins since it is only locally hosted. I have tried to include as much information as I knew about this problem. If you need any more information please ask.

 

Also i'm sorry if this doesn't belong here.

Posted

1.7.10 is no longer supported on this forum. Please update to receive support.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted

Make sure that the server is the only app running and post your computer specs.

 

4 hours ago, DaemonUmbra said:

1.7.10 is no longer supported on this forum. Please update to receive support.

 

About Me

Spoiler

My Discord - Cadiboo#8887

My WebsiteCadiboo.github.io

My ModsCadiboo.github.io/projects

My TutorialsCadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

  • Guest locked this topic
Guest
This topic is now closed to further replies.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • that happens every time I enter a new dimension.
    • This is the last line before the crash: [ebwizardry]: Synchronising spell emitters for PixelTraveler But I have no idea what this means
    • What in particular? I barely used that mod this time around, and it's never been a problem in the past.
    • Im trying to build my mod using shade since i use the luaj library however i keep getting this error Reason: Task ':reobfJar' uses this output of task ':shadowJar' without declaring an explicit or implicit dependency. This can lead to incorrect results being produced, depending on what order the tasks are executed. So i try adding reobfJar.dependsOn shadowJar  Could not get unknown property 'reobfJar' for object of type org.gradle.api.internal.artifacts.dsl.dependencies.DefaultDependencyHandler. my gradle file plugins { id 'eclipse' id 'idea' id 'maven-publish' id 'net.minecraftforge.gradle' version '[6.0,6.2)' id 'com.github.johnrengelman.shadow' version '7.1.2' id 'org.spongepowered.mixin' version '0.7.+' } apply plugin: 'net.minecraftforge.gradle' apply plugin: 'org.spongepowered.mixin' apply plugin: 'com.github.johnrengelman.shadow' version = mod_version group = mod_group_id base { archivesName = mod_id } // Mojang ships Java 17 to end users in 1.18+, so your mod should target Java 17. java.toolchain.languageVersion = JavaLanguageVersion.of(17) //jarJar.enable() println "Java: ${System.getProperty 'java.version'}, JVM: ${System.getProperty 'java.vm.version'} (${System.getProperty 'java.vendor'}), Arch: ${System.getProperty 'os.arch'}" minecraft { mappings channel: mapping_channel, version: mapping_version copyIdeResources = true runs { configureEach { workingDirectory project.file('run') property 'forge.logging.markers', 'REGISTRIES' property 'forge.logging.console.level', 'debug' arg "-mixin.config=derp.mixin.json" mods { "${mod_id}" { source sourceSets.main } } } client { // Comma-separated list of namespaces to load gametests from. Empty = all namespaces. property 'forge.enabledGameTestNamespaces', mod_id } server { property 'forge.enabledGameTestNamespaces', mod_id args '--nogui' } gameTestServer { property 'forge.enabledGameTestNamespaces', mod_id } data { workingDirectory project.file('run-data') args '--mod', mod_id, '--all', '--output', file('src/generated/resources/'), '--existing', file('src/main/resources/') } } } sourceSets.main.resources { srcDir 'src/generated/resources' } repositories { flatDir { dirs './libs' } maven { url = "https://jitpack.io" } } configurations { shade implementation.extendsFrom shade } dependencies { minecraft "net.minecraftforge:forge:${minecraft_version}-${forge_version}" implementation 'org.luaj:luaj-jse-3.0.2' implementation fg.deobf("com.github.Virtuoel:Pehkui:${pehkui_version}") annotationProcessor 'org.spongepowered:mixin:0.8.5:processor' minecraftLibrary 'luaj:luaj-jse:3.0.2' shade 'luaj:luaj-jse:3.0.2' } // Example for how to get properties into the manifest for reading at runtime. tasks.named('jar', Jar).configure { manifest { attributes([ 'Specification-Title' : mod_id, 'Specification-Vendor' : mod_authors, 'Specification-Version' : '1', // We are version 1 of ourselves 'Implementation-Title' : project.name, 'Implementation-Version' : project.jar.archiveVersion, 'Implementation-Vendor' : mod_authors, 'Implementation-Timestamp': new Date().format("yyyy-MM-dd'T'HH:mm:ssZ"), "TweakClass" : "org.spongepowered.asm.launch.MixinTweaker", "TweakOrder" : 0, "MixinConfigs" : "derp.mixin.json" ]) } rename 'mixin.refmap.json', 'derp.mixin-refmap.json' } shadowJar { archiveClassifier = '' configurations = [project.configurations.shade] finalizedBy 'reobfShadowJar' } assemble.dependsOn shadowJar reobf { re shadowJar {} } publishing { publications { mavenJava(MavenPublication) { artifact jar } } repositories { maven { url "file://${project.projectDir}/mcmodsrepo" } } } my entire project:https://github.com/kevin051606/DERP-Mod/tree/Derp-1.0-1.20
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.