Jump to content
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

Error download Forge

McProEnder

By McProEnder
in Support & Bug Reports

 Share

Recommended Posts

McProEnder Tree Puncher

McProEnder

Posted
Posted

So recently, I started modding Minecraft and was fairly successful at it, sadly a problem occurred, as when I tried to Play, it never loaded up, or it crashed and said something about an "unexpected interruption". After that I went to forge and tried to re-download it. I figured out that there was a problem where I could not download forge because of some missing files (Scala files). So I decided to try and figure out what was wrong with it myself, so I deleted and reinstalling Minecraft and I deleted WinRAR. After all that and a combination of research I figured out that many people have this same problem, and many people have posted links and videos on how to fix this problem, but all of them where outdated, most of the links did not work. I proceeded to download the missing files and put them where they should be, but unfortunately, Forge still gave me the error message about how it was missing the files, at this point I have no idea what I'm doing wrong, If anyone has any higher knowledge about this problem please let me know because I am no modder.

                                                                                                                                       Also excuse any miss-spelled words, I'm not the best writer, or typer. Thank you in advance!

 

BUG.PNG

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

The forge installer does not recognize manually downloaded files, have you tried these instructions?

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
McProEnder Tree Puncher

McProEnder

Posted
  • Author
Posted
1 hour ago, DaemonUmbra said:

The forge installer does not recognize manually downloaded files, have you tried these instructions?

 

Well, i understand where to find the (minecraft-forge) folder but, there is nothing in it and i don't know what to do, and even if there was anything in it.

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

What part of the instructions are you getting stuck on?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

The jar version of the installer yes, the download button for it is right next to the one for the windows installer.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
McProEnder Tree Puncher

McProEnder

Posted
  • Author
Posted

After i put the stuff into command prompt it gave me this error: 

We appear to be missing one or more essential library files.
You will need to add them to your server before FML and Forge will run successfully.java.lang.ClassNotFoundException: net.minecraft.launchwrapper.Launch
        at java.net.URLClassLoader.findClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
        at java.lang.ClassLoader.loadClass(Unknown Source)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Unknown Source)
        at net.minecraftforge.fml.relauncher.ServerLaunchWrapper.run(ServerLaunchWrapper.java:44)
        at net.minecraftforge.fml.relauncher.ServerLaunchWrapper.main(ServerLaunchWrapper.java:31)

 

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Did you get the installer or the universal?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

The Installer, not the Windows Installer though, it just says Installer

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Is that supposed to be sarcasm or are you trying to be 1337 or something?

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
McProEnder Tree Puncher

McProEnder

Posted
  • Author
Posted

shoot well first off Sorry and no that wasn't sarcasm, You really did help, i'm just in a quirky mood right now, and Second when i try and play minecraft forge, it always goes into a "not responding" state  where i can only click exit the program. So you did help with something but now a new problem occurred. ? 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

During loading sometimes Minecraft will do that on lower end machines, give it a bit and it should continue loading.

(Windows is a bit crap with how it detects frozen programs)

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Unless it stays like that for several full minutes, yes. If it does stay like that for that long please upload your debug.log to pastebin or GitHub's Gist service and post the link it gives you.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

easiest way to get to it on windows is to open a Run prompt (Windows Key + R) and type 

%APPDATA%\.minecraft\logs

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
Azaaaa Tree Puncher

Azaaaa

Posted
Posted
34 minutes ago, diesieben07 said:

You need to use the command line, not powershell. You can use the command line from powershell by typing in cmd.

Thanks, I had to add command promp to the menu for opening it in folder and then it worked for a while but then got this 

 

image.png.061ef8d3e3803951d4dc744dbac78ccd.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept