Jump to content

Recommended Posts

Posted

Currently, I'm running Forge 1.12.2 (with Optifine) and it works great! However, I want to be able to use another version of Forge along with the version I currently have installed. The reason I installed Forge in the first place was because I couldn't load Optifine by itself for some reason, and I still don't understand why. Anyway, is it possible to have two versions of Forge installed at the same time? I've already tried doing this with multiple versions, but to no avail; Forge crashes everytime. When I go back and look in the launch options, those versions of Forge are still there, even though I've deleted the files off of my computer. If there's no way to have two versions installed at the same time, is the any way to guarantee that the other version of Forge will work properly if I can rid of the version I already have installed?

Thanks!

Posted

What launcher are you using? Please provide a screenshot.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted

It is possible to install different versions of forge.

You can delete a version of forge by going to the version folder in your Minecraft path and delete the corresponding version.

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

Posted
20 minutes ago, DaemonUmbra said:

What launcher are you using? Please provide a screenshot.

I'm using the default launcher.

launcher.PNG

Posted
23 minutes ago, DavidM said:

It is possible to install different versions of forge.

You can delete a version of forge by going to the version folder in your Minecraft path and delete the corresponding version.

Are you saying that if I delete my current version of Forge, I should be able to install a different version with no problems?

Posted

You should not have to delete any version to install more.

Can you provide logs for the versions that crash, and please verify that the crashing versions are versions you have not removed the files for.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted
10 hours ago, DaemonUmbra said:

You should not have to delete any version to install more.

Can you provide logs for the versions that crash, and please verify that the crashing versions are versions you have not removed the files for.

I ran the recommended version of 1.8.9 three times, and this is what I got.

pic1.PNG

pic2.PNG

pic3.PNG

Posted

Those are not logs and 1.8.9 is no longer supported due to its age.

If you wish to receive further support please update to a modern version and provide logs (more info in my forum signature).

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted
4 hours ago, DaemonUmbra said:

Those are not logs and 1.8.9 is no longer supported due to its age.

If you wish to receive further support please update to a modern version and provide logs (more info in my forum signature).

Well, I've downloaded the installer for 1.13.2 and it's a .jar file, but I can't open it for some reason. I've downloaded the newest version of Forge 1.13.2 a few times and it never opens. I just can't get the .jar files open. Every time I click on the icon the command prompt pops up (I'm running Windows 10) for a brief moment before going away, and nothing happens. Why does it do this? My previous computer had no problems opening .jar files.

Posted

Try running the jar with the command prompt and post the output.

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

Posted
14 hours ago, DavidM said:

Try running the jar with the command prompt and post the output.

It simply says 'The system cannot find the file specified.' I looked up how to run a .jar file and it didn't work at all.

Posted (edited)
38 minutes ago, Plugin said:

It simply says 'The system cannot find the file specified.' I looked up how to run a .jar file and it didn't work at all.

That means you did something wrong.

Try again. Search up how to run a jar in the command prompt.

Edited by DavidM

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

Posted (edited)

Having the same problem as David.   I am using Win10 with Winrar (since I do some resource mods).   However this Forge 1.13.2  is driving me insane to get it to work.  I have Java  jre1.8.0-161 and 8.0-211.  I even changed the properties of jar files to open with java; command window then gone in a flash.  

Then tried it as javaw: nothing happens

to javaws: gives this report as Unable to launch the application

Details:

CouldNotLoadArgumentException[ Could not load file/URL specified: E:\Games\Minecraft\MINECRAFT - Core Mod Styles\v1.13.2\Tools\forge-1.13.2-25.0.191-installer.jar]
    at com.sun.javaws.Main.launchApp(Unknown Source)
    at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
    at com.sun.javaws.Main.access$000(Unknown Source)
    at com.sun.javaws.Main$1.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: File too large
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    ... 5 more

 

So which java app works?   I even ran the look for in java panel and it only just picks up Minecraft Installer program.

I have limited knowledge on this stuff.  I been trying to update to 13.2 since a lot of my favorite mods are now up to 13.2.  I been using the substitute for Forge on 13.2 but now that Forge is out they won't be updating (actually they never updated since their release)

 

I JUST FIXED IT AND INSTALLED still :  if at all can Forge have the easy button for Windows?  since that never gave me any issues

 

 

DAVIDM:

 

okay, what I did was this:

1st:  Move Forge to Desktop

2nd: click on the forge without opening it!

3rd: hit Window Icon on keybroad + X 

4th: Choose Command prompt with Admin

5th Type in                     java -jar (file location*)    then enter

*Location should be at C:\Users\xxxx*\Desktop\forge-1.13.2-25.0.191-installer.jar

**user is the person profile

 

6th: Forge should prop up!

7th: you can move forge back to where you save files

 

Hope this works for you and anyone else!

 

Edited by Iteries
Posted
51 minutes ago, Iteries said:

Having the same problem as David.

I didn't have a problem in this thread though...

The OP is @Plugin.

 

I'm glad that you are trying to help others; however, the problem you are encountering is not exactly the same as what the OP is asking help for. In the future, please create a new thread for your problem, as having multiple problems in one thread can cause confusions.

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

  • 1 year later...
Posted

if you have the newest version of the minecraft launcher put ther forge on en try it if it works delete the forge version with the minecraft launcher(this is not permanent) then set a the other version with forge on the new minecraft launcher if that works make a new installation en do this  go hier ||                                                                                                                                                                                              \/                                                                                                                                                                                             \/

image.png

  • Guest locked this topic
Guest
This topic is now closed to further replies.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • Version 1.19 - Forge 41.0.63 I want to create a wolf entity that I can ride, so far it seems to be working, but the problem is that when I get on the wolf, I can’t control it. I then discovered that the issue is that the server doesn’t detect that I’m riding the wolf, so I’m struggling with synchronization. However, it seems to not be working properly. As I understand it, the server receives the packet but doesn’t register it correctly. I’m a bit new to Java, and I’ll try to provide all the relevant code and prints *The comments and prints are translated by chatgpt since they were originally in Spanish* Thank you very much in advance No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. MountableWolfEntity package com.vals.valscraft.entity; import com.vals.valscraft.network.MountSyncPacket; import com.vals.valscraft.network.NetworkHandler; import net.minecraft.client.Minecraft; import net.minecraft.network.syncher.EntityDataAccessor; import net.minecraft.network.syncher.EntityDataSerializers; import net.minecraft.network.syncher.SynchedEntityData; import net.minecraft.server.MinecraftServer; import net.minecraft.server.level.ServerPlayer; import net.minecraft.world.entity.EntityType; import net.minecraft.world.entity.Mob; import net.minecraft.world.entity.ai.attributes.AttributeSupplier; import net.minecraft.world.entity.ai.attributes.Attributes; import net.minecraft.world.entity.animal.Wolf; import net.minecraft.world.entity.player.Player; import net.minecraft.world.entity.Entity; import net.minecraft.world.InteractionHand; import net.minecraft.world.InteractionResult; import net.minecraft.world.item.ItemStack; import net.minecraft.world.item.Items; import net.minecraft.world.level.Level; import net.minecraft.world.phys.Vec3; import net.minecraftforge.event.TickEvent; import net.minecraftforge.eventbus.api.SubscribeEvent; import net.minecraftforge.network.PacketDistributor; public class MountableWolfEntity extends Wolf { private boolean hasSaddle; private static final EntityDataAccessor<Byte> DATA_ID_FLAGS = SynchedEntityData.defineId(MountableWolfEntity.class, EntityDataSerializers.BYTE); public MountableWolfEntity(EntityType<? extends Wolf> type, Level level) { super(type, level); this.hasSaddle = false; } @Override protected void defineSynchedData() { super.defineSynchedData(); this.entityData.define(DATA_ID_FLAGS, (byte)0); } public static AttributeSupplier.Builder createAttributes() { return Wolf.createAttributes() .add(Attributes.MAX_HEALTH, 20.0) .add(Attributes.MOVEMENT_SPEED, 0.3); } @Override public InteractionResult mobInteract(Player player, InteractionHand hand) { ItemStack itemstack = player.getItemInHand(hand); if (itemstack.getItem() == Items.SADDLE && !this.hasSaddle()) { if (!player.isCreative()) { itemstack.shrink(1); } this.setSaddle(true); return InteractionResult.SUCCESS; } else if (!level.isClientSide && this.hasSaddle()) { player.startRiding(this); MountSyncPacket packet = new MountSyncPacket(true); // 'true' means the player is mounted NetworkHandler.CHANNEL.sendToServer(packet); // Ensure the server handles the packet return InteractionResult.SUCCESS; } return InteractionResult.PASS; } @Override public void travel(Vec3 travelVector) { if (this.isVehicle() && this.getControllingPassenger() instanceof Player) { System.out.println("The wolf has a passenger."); System.out.println("The passenger is a player."); Player player = (Player) this.getControllingPassenger(); // Ensure the player is the controller this.setYRot(player.getYRot()); this.yRotO = this.getYRot(); this.setXRot(player.getXRot() * 0.5F); this.setRot(this.getYRot(), this.getXRot()); this.yBodyRot = this.getYRot(); this.yHeadRot = this.yBodyRot; float forward = player.zza; float strafe = player.xxa; if (forward <= 0.0F) { forward *= 0.25F; } this.flyingSpeed = this.getSpeed() * 0.1F; this.setSpeed((float) this.getAttributeValue(Attributes.MOVEMENT_SPEED) * 1.5F); this.setDeltaMovement(new Vec3(strafe, travelVector.y, forward).scale(this.getSpeed())); this.calculateEntityAnimation(this, false); } else { // The wolf does not have a passenger or the passenger is not a player System.out.println("No player is mounted, or the passenger is not a player."); super.travel(travelVector); } } public boolean hasSaddle() { return this.hasSaddle; } public void setSaddle(boolean hasSaddle) { this.hasSaddle = hasSaddle; } @Override protected void dropEquipment() { super.dropEquipment(); if (this.hasSaddle()) { this.spawnAtLocation(Items.SADDLE); this.setSaddle(false); } } @SubscribeEvent public static void onServerTick(TickEvent.ServerTickEvent event) { if (event.phase == TickEvent.Phase.START) { MinecraftServer server = net.minecraftforge.server.ServerLifecycleHooks.getCurrentServer(); if (server != null) { for (ServerPlayer player : server.getPlayerList().getPlayers()) { if (player.isPassenger() && player.getVehicle() instanceof MountableWolfEntity) { MountableWolfEntity wolf = (MountableWolfEntity) player.getVehicle(); System.out.println("Tick: " + player.getName().getString() + " is correctly mounted on " + wolf); } } } } } private boolean lastMountedState = false; @Override public void tick() { super.tick(); if (!this.level.isClientSide) { // Only on the server boolean isMounted = this.isVehicle() && this.getControllingPassenger() instanceof Player; // Only print if the state changed if (isMounted != lastMountedState) { if (isMounted) { Player player = (Player) this.getControllingPassenger(); // Verify the passenger is a player System.out.println("Server: Player " + player.getName().getString() + " is now mounted."); } else { System.out.println("Server: The wolf no longer has a passenger."); } lastMountedState = isMounted; } } } @Override public void addPassenger(Entity passenger) { super.addPassenger(passenger); if (passenger instanceof Player) { Player player = (Player) passenger; if (!this.level.isClientSide && player instanceof ServerPlayer) { // Send the packet to the server to indicate the player is mounted NetworkHandler.CHANNEL.send(PacketDistributor.PLAYER.with(() -> (ServerPlayer) player), new MountSyncPacket(true)); } } } @Override public void removePassenger(Entity passenger) { super.removePassenger(passenger); if (passenger instanceof Player) { Player player = (Player) passenger; if (!this.level.isClientSide && player instanceof ServerPlayer) { // Send the packet to the server to indicate the player is no longer mounted NetworkHandler.CHANNEL.send(PacketDistributor.PLAYER.with(() -> (ServerPlayer) player), new MountSyncPacket(false)); } } } @Override public boolean isControlledByLocalInstance() { Entity entity = this.getControllingPassenger(); return entity instanceof Player; } @Override public void positionRider(Entity passenger) { if (this.hasPassenger(passenger)) { double xOffset = Math.cos(Math.toRadians(this.getYRot() + 90)) * 0.4; double zOffset = Math.sin(Math.toRadians(this.getYRot() + 90)) * 0.4; passenger.setPos(this.getX() + xOffset, this.getY() + this.getPassengersRidingOffset() + passenger.getMyRidingOffset(), this.getZ() + zOffset); } } } MountSyncPacket package com.vals.valscraft.network; import com.vals.valscraft.entity.MountableWolfEntity; import net.minecraft.network.FriendlyByteBuf; import net.minecraft.server.level.ServerLevel; import net.minecraft.server.level.ServerPlayer; import net.minecraft.world.entity.Entity; import net.minecraft.world.entity.player.Player; import net.minecraftforge.network.NetworkEvent; import java.util.function.Supplier; public class MountSyncPacket { private final boolean isMounted; public MountSyncPacket(boolean isMounted) { this.isMounted = isMounted; } public void encode(FriendlyByteBuf buffer) { buffer.writeBoolean(isMounted); } public static MountSyncPacket decode(FriendlyByteBuf buffer) { return new MountSyncPacket(buffer.readBoolean()); } public void handle(NetworkEvent.Context context) { context.enqueueWork(() -> { ServerPlayer player = context.getSender(); // Get the player from the context if (player != null) { // Verifies if the player has dismounted if (!isMounted) { Entity vehicle = player.getVehicle(); if (vehicle instanceof MountableWolfEntity wolf) { // Logic to remove the player as a passenger wolf.removePassenger(player); System.out.println("Server: Player " + player.getName().getString() + " is no longer mounted."); } } } }); context.setPacketHandled(true); // Marks the packet as handled } } networkHandler package com.vals.valscraft.network; import com.vals.valscraft.valscraft; import net.minecraft.resources.ResourceLocation; import net.minecraftforge.network.NetworkRegistry; import net.minecraftforge.network.simple.SimpleChannel; import net.minecraftforge.network.NetworkEvent; import java.util.function.Supplier; public class NetworkHandler { private static final String PROTOCOL_VERSION = "1"; public static final SimpleChannel CHANNEL = NetworkRegistry.newSimpleChannel( new ResourceLocation(valscraft.MODID, "main"), () -> PROTOCOL_VERSION, PROTOCOL_VERSION::equals, PROTOCOL_VERSION::equals ); public static void init() { int packetId = 0; // Register the mount synchronization packet CHANNEL.registerMessage( packetId++, MountSyncPacket.class, MountSyncPacket::encode, MountSyncPacket::decode, (msg, context) -> msg.handle(context.get()) // Get the context with context.get() ); } }  
    • Do you use features of inventory profiles next (ipnext) or is there a change without it?
    • Remove rubidium - you are already using embeddium, which is a fork of rubidium
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.