Jump to content

Recommended Posts

Posted

Hey, sorry to be a bother, but I've downloaded forge about 6 times now. Each time I download it and go through the procedures, it says that it's been successfully downloaded to Minecraft. Good, right? So, I check the .Minecraft folder (where it says it downloaded to) and nothing is there. I check everywhere, but there's nothing. I decide to play the game and hope for the best, but again it appears like forge isn't working. I've followed every tutorial, recent and old. I've made sure that everything is up-to-date and in the correct version. I even looked on this forum and saw that someone said to change the default application that opens files. Been there, done that. It seems like no matter what I do I can not download it properly! Please help, and thank you in advance :)

Posted

I'm not sure which file you are downloading, what procedures you are following, or what tutorials you are following.

Installing Forge is rather simple in my mind, download the installer for your desired version of Forge from the files page, run the installer, then open Minecraft and use the Forge launcher profile that the installer created for you.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted
8 hours ago, DaemonUmbra said:

I'm not sure which file you are downloading, what procedures you are following, or what tutorials you are following.

Installing Forge is rather simple in my mind, download the installer for your desired version of Forge from the files page, run the installer, then open Minecraft and use the Forge launcher profile that the installer created for you.

In my case, on 1.12.2 Forge didn't create a launcher profile, I had to make a new profile and select the version if Forge I just installed

Posted
8 hours ago, DaemonUmbra said:

I'm not sure which file you are downloading, what procedures you are following, or what tutorials you are following.

Installing Forge is rather simple in my mind, download the installer for your desired version of Forge from the files page, run the installer, then open Minecraft and use the Forge launcher profile that the installer created for you.

That's what I'm doing, and nothing works. No matter what I do nothing seems to work. I downloaded the file that works for my version of Minecraft, I downloaded the launcher for Windows, but nothing works. Any ideas?

Posted
7 minutes ago, diesieben07 said:

You keep saying "nothing works". Please be more specific in what does not work and in what way. Provide screenshots, log files, descriptions on what you are doing and what's happening, anything.

(Sorry if this sounds odd, I'm not sure about the proper terms) I don't have any screenshots or log files, but I can try to describe. I download the installer thing for Windows, I go through the installing process, it says that it was properly installed. I open Minecraft, aware of what is supposed to happen if the installation process works, and nothing is changed. 

Posted
3 minutes ago, diesieben07 said:

So:

  • You do not see a new launcher profile.
  • You do not see a new version installed in the launcher.

Is that both correct? What launcher are you using?

yep! Again, sorry about wrong terminology, but are you asking about a Minecraft launcher, or an installer for forge? Thanks in advance

Posted
4 hours ago, diesieben07 said:

I did say "launcher", right? If I had meant the installer I would have said "installer".

So yes, what Minecraft launcher are you using?

Oh, sorry if i’m sounding like an idiot. I’ll try to speak like an adult now. 

Is this bett'r f'r thee? i am using the TLauncher f'r minecraft, valorous sir.  
 if 't be true thee can’t und'rstand me, then i suggesteth thee starteth cracking to decode this.  Aye, i shall beest typing liketh this to thee anon, valorous sir.  Prithee don’t treateth ev'ryone likes idiots, you’re just as cunning as the rest of us.  Grant you mercy in advance, valorous sir

Posted

User was banned for using a cracked launcher.

  • Thanks 2

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Guest
This topic is now closed to further replies.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • I want to create block with entity, that will have height of 3 or more(configurable) and I tried to change first VoxelShape by increasing collision box on height I want and for changing block height on visual side i tried to configure BlockModelBuilder:  base.element() .from(0, 0, 0) .to(16f, 48f, 16f) .face(Direction.UP).texture("#top").end() .face(Direction.DOWN).texture("#bottom").end() .face(Direction.NORTH).texture("#side").end() .face(Direction.SOUTH).texture("#side").end() .face(Direction.WEST).texture("#side").end() .face(Direction.EAST).texture("#side").end() .end(); but, getting crash with next error: Position y out of range, must be within [-16, 32]. Found: %d [48.0]; Looks like game wont to block height modified by more than 32. Is there any way to fix that problem?
    • As long as the packets you are sending aren't lost, there's nothing wrong with what you're currently doing. Although, this sounds like something that would benefit from you making your own datapack registry instead of trying to arbitrarily sync static maps. Check out `DataPackRegistryEvent.NewRegistry`.
    • Hey all, I've been working a lot with datapacks lately, and I'm wondering what the most efficient way to get said data from server to client is.  I'm currently using packets, but given that a lot of the data I'm storing involves maps along the lines of Map<ResourceLocation, CustomDataType>, it can easily start to get messy if I need to transmit a lot of that data all at once. Recently I started looking into the ReloadableServerResources class, which is where Minecraft stores its built-ins.  I see you can access it via the server from the server's resources.managers, and it seems like this can be done even from the client to appropriately retrieve data from the server, unless I'm misunderstanding.  However, from what I can tell, this only works via built-in methods such as getRecipeManager() or getLootTables(), etc.  These are all SimpleJsonResourceReloadListeners, just like my datapack entries are, so it seems like it could be possible for me to access my datapack entries similarly?  But I don't see anywhere in ReloadableServerResources that stores loaded modded entries, so either I'm looking in the wrong place or it doesn't seem to be a thing. Are packets really the best way of doing this, or am I missing a method that would let me use ReloadableServerResources or something similar?
    • Hi, everyone! I'm new to minecraft modding stuff and want ask you some questions. 1. I checked forge references and saw there com.mojang and net.minecraft (not net.minecraftforge) and as I understand it's original game packages with all minecraft logic inside including renderers and so on, right? 2. Does it mean that forge has a limited set of instruments which doesn't cover all the aspects of the game? If make my question more specific then does forge provide such instruments that allow me totally change minecraft itself, like base mechanics and etc.? Or I have to use "original game packages" to implement such things? 3. I actively learning basic concepts with forge documentation and tutorials. So in my plans make different inventory system like in diabloids. Is that possible with forge? 4. It is last question related to the second one. So how deeply I can change minecraft with forge? I guess all my questions above because of that I haven't globally understanding what forge is and how it works inside and how it works with minecraft. It would be great if you provide some links or topics about it or explain it by yourself but I guess it's to big to be explained in that post at once. Anyway, thank you all for any help!
    • Im trying add to block a hole in center, just a usual block and in center of it on up side, there is should be a hole. I tried to add it via BlockModelBuilder, but its not working. Problem is that it only can change block size outside. I tried it to do with VoxelShape and its working, but its has been on server side and looks like its just changed collision shape, but for client, there is a texture covering this hole. I tried to use: base.renderType("cutout"); and removed some pixels from texture. I thought its should work, but game optimization makes block inside looks transparent. So, only custom model?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.