Jump to content

Recommended Posts

Posted

i tried to start up a forge server for me and my friends but some of the mods dont load and dont work only the map and the JEI work but things like the twilight or industry-craft 2 dont work however when i try use them in a single player world they work please help

Posted
4 minutes ago, itzdawid said:

i tried to start up a forge server for me and my friends but some of the mods dont load and dont work only the map and the JEI work but things like the twilight or industry-craft 2 dont work however when i try use them in a single player world they work please help

By don't work, you mean they crash the game when you craft something from the mods, cause the server to not load at all, or just don't load into the server?

Posted
1 minute ago, Hyper_Zero said:

By don't work, you mean they crash the game when you craft something from the mods, cause the server to not load at all, or just don't load into the server?

The world loads and people are able to join but the mods dont load in the world such as custom ores or it wont even let me generate the twilight

 

Posted

[Server console handler/ERROR]: Exception handling console input
java.io.IOException: The handle is invalid
    at java.io.FileInputStream.readBytes(Native Method) ~[?:1.8.0_211]
    at java.io.FileInputStream.read(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedInputStream.read1(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedInputStream.read(Unknown Source) ~[?:1.8.0_211]
    at sun.nio.cs.StreamDecoder.readBytes(Unknown Source) ~[?:1.8.0_211]
    at sun.nio.cs.StreamDecoder.implRead(Unknown Source) ~[?:1.8.0_211]
    at sun.nio.cs.StreamDecoder.read(Unknown Source) ~[?:1.8.0_211]
    at java.io.InputStreamReader.read(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedReader.fill(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedReader.readLine(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedReader.readLine(Unknown Source) ~[?:1.8.0_211]
    at nz$2.run(SourceFile:100) [minecraft_server.1.12.2.jar:?]

 

I keep seeing this at the top of all of your logs, not sure if it's of any significance, but it might be good to look into.

After doing some digging I found an old thread, it might be good for you to look into this, it seems to be similar if not the same issue you're facing, I could be wrong...

 

http://www.minecraftforum.net/forums/support/server-support/2191212-server-is-using-unknown-files#c16

Posted
13 minutes ago, Hyper_Zero said:

[Server console handler/ERROR]: Exception handling console input
java.io.IOException: The handle is invalid
    at java.io.FileInputStream.readBytes(Native Method) ~[?:1.8.0_211]
    at java.io.FileInputStream.read(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedInputStream.read1(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedInputStream.read(Unknown Source) ~[?:1.8.0_211]
    at sun.nio.cs.StreamDecoder.readBytes(Unknown Source) ~[?:1.8.0_211]
    at sun.nio.cs.StreamDecoder.implRead(Unknown Source) ~[?:1.8.0_211]
    at sun.nio.cs.StreamDecoder.read(Unknown Source) ~[?:1.8.0_211]
    at java.io.InputStreamReader.read(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedReader.fill(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedReader.readLine(Unknown Source) ~[?:1.8.0_211]
    at java.io.BufferedReader.readLine(Unknown Source) ~[?:1.8.0_211]
    at nz$2.run(SourceFile:100) [minecraft_server.1.12.2.jar:?]

 

I keep seeing this at the top of all of your logs, not sure if it's of any significance, but it might be good to look into.

After doing some digging I found an old thread, it might be good for you to look into this, it seems to be similar if not the same issue you're facing, I could be wrong...

 

http://www.minecraftforum.net/forums/support/server-support/2191212-server-is-using-unknown-files#c16

Yea that diddnt really help im still getting the same issue anything else youd suggest?

 

Posted
9 minutes ago, Hyper_Zero said:

Do you have a server .bat file? If you do, which you should, can you send the text that's in there?

how do i make a .bat file

 

Posted
5 minutes ago, itzdawid said:

no i dont think so

 

What might be happening is that, the server isn't able to actually read the mods folder. That's why you'd need to create a .bat file, that and a few other reasons...

 

The video I have listed, might be able to help you more on this matter. At least, it'll help you get set up. Also, I've skipped through the video a bit, you can watch the whole thing if you want.

 

 

Posted
6 minutes ago, Hyper_Zero said:

What might be happening is that, the server isn't able to actually read the mods folder. That's why you'd need to create a .bat file, that and a few other reasons...

 

The video I have listed, might be able to help you more on this matter. At least, it'll help you get set up. Also, I've skipped through the video a bit, you can watch the whole thing if you want.

 

 

ive done all this but i still dont have the .bat file and i cant find anything that shows me how to get one that i will need for my server and he also seems to get the same issue as you see below  image.thumb.png.fad9e04ce31aee446ad64812d527efb8.png                                           thats what appears in mine and thats got the same "unknown" thing

Posted

The filenames of some of your mods suggests you are not getting them from official sources, please read my signature for more info on why this is a bad thing.

 

<rant>

Why does everyone need a tutorial for installing a Forge server?

  1. Download Forge installer from https://files.minecraftforge.net
  2. Run installer
  3. Select Server Install
  4. Select Server Directory
  5. Click Install
  6. If you have problems, come here with the installer log

</rant>

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted
7 minutes ago, DaemonUmbra said:

The filenames of some of your mods suggests you are not getting them from official sources, please read my signature for more info on why this is a bad thing.

 

<rant>

Why does everyone need a tutorial for installing a Forge server?

  1. Download Forge installer from https://files.minecraftforge.net
  2. Run installer
  3. Select Server Install
  4. Select Server Directory
  5. Click Install
  6. If you have problems, come here with the installer log

</rant>

He said he's already installed the server though, sent logs too.

Posted
6 minutes ago, Hyper_Zero said:

"C:\Program Files (x86)\Java\jre7\bin\java.exe"  as an example. Add "" the dir line in the .bat then put a space after the last quotation, before -Xmx3072

ngl this confused me im still not sure what im acc meant to do

Posted (edited)

Give me a moment. I'm going to try and reproduce the error on my pc.

 

So, after each ram amount -xmx3078 add M after each. This way the server will know your adding it by the megabyte.

 

 

Edited by Hyper_Zero
Posted
15 minutes ago, Hyper_Zero said:

So, after each ram amount -xmx3078 add M after each. This way the server will know your adding it by the megabyte.

yea ive done that still no good

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.