My forge modded server wont start

Posted July 29, 20196 yr

when i try to run the forge universal it opens the consle and then waits a min then closes i know that there is allready a post about this but it dident help

July 30, 20196 yr

Run it from Console and provide the output

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

July 30, 20196 yr

Author

okay

July 30, 20196 yr

Author

[18:37:06] [main/INFO] [LaunchWrapper]: Loading tweak class name net.minecraftforge.fml.common.launcher.FMLServerTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Loading tweak class name net.minecraftforge.fml.common.launcher.FMLServerTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Using primary tweak class name net.minecraftforge.fml.common.launcher.FMLServerTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.common.launcher.FMLServerTweaker[18:37:06] [main/INFO] [FML]: Forge Mod Loader version 14.23.5.2768 for Minecraft 1.12.2 loading[18:37:06] [main/INFO] [FML]: Java is Java HotSpot(TM) 64-Bit Server VM, version 1.8.0_211, running on Windows 10:amd64:10.0, installed at C:\Program Files\Java\jre1.8.0_211[18:37:06] [main/INFO] [FML]: Searching C:\Users\Dameo\OneDrive\Desktop\FORGE SERVER\.\mods for mods[18:37:06] [main/INFO] [LaunchWrapper]: Loading tweak class name net.minecraftforge.fml.common.launcher.FMLInjectionAndSortingTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Loading tweak class name net.minecraftforge.fml.common.launcher.FMLDeobfTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.common.launcher.FMLInjectionAndSortingTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.common.launcher.FMLInjectionAndSortingTweaker[18:37:06] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.relauncher.CoreModManager$FMLPluginWrapper[18:37:08] [main/INFO] [FML]: Found valid fingerprint for Minecraft Forge. Certificate fingerprint e3c3d50c7c986df74c645c0ac54639741c90a557[18:37:08] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.relauncher.CoreModManager$FMLPluginWrapper[18:37:08] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.common.launcher.FMLDeobfTweaker[18:37:08] [main/INFO] [LaunchWrapper]: Loading tweak class name net.minecraftforge.fml.common.launcher.TerminalTweaker[18:37:08] [main/INFO] [LaunchWrapper]: Calling tweak class net.minecraftforge.fml.common.launcher.TerminalTweaker[18:37:08] [main/INFO] [LaunchWrapper]: Launching wrapped minecraft {net.minecraft.server.MinecraftServer}[18:37:11] [Server thread/INFO] [minecraft/DedicatedServer]: Starting minecraft server version 1.12.2[18:37:11] [Server console handler/ERROR] [minecraft/DedicatedServer]: Exception handling console inputjava.io.IOException: The handle is invalid at java.io.FileInputStream.readBytes(Native Method) ~[?:1.8.0_211] at java.io.FileInputStream.read(Unknown Source) ~[?:1.8.0_211] at java.io.BufferedInputStream.read1(Unknown Source) ~[?:1.8.0_211] at java.io.BufferedInputStream.read(Unknown Source) ~[?:1.8.0_211] at sun.nio.cs.StreamDecoder.readBytes(Unknown Source) ~[?:1.8.0_211] at sun.nio.cs.StreamDecoder.implRead(Unknown Source) ~[?:1.8.0_211] at sun.nio.cs.StreamDecoder.read(Unknown Source) ~[?:1.8.0_211] at java.io.InputStreamReader.read(Unknown Source) ~[?:1.8.0_211] at java.io.BufferedReader.fill(Unknown Source) ~[?:1.8.0_211] at java.io.BufferedReader.readLine(Unknown Source) ~[?:1.8.0_211] at java.io.BufferedReader.readLine(Unknown Source) ~[?:1.8.0_211] at net.minecraft.server.dedicated.DedicatedServer$2.run(DedicatedServer.java:105) [nz$2.class:?][18:37:11] [Server thread/INFO] [FML]: MinecraftForge v14.23.5.2768 Initialized[18:37:11] [Server thread/INFO] [FML]: Starts to replace vanilla recipe ingredients with ore ingredients.[18:37:12] [Server thread/INFO] [FML]: Replaced 1036 ore ingredients[18:37:12] [Server thread/INFO] [FML]: Searching C:\Users\Dameo\OneDrive\Desktop\FORGE SERVER\.\mods for mods[18:37:13] [Server thread/INFO] [FML]: Forge Mod Loader has identified 4 mods to load[18:37:13] [Server thread/WARN] [FML]: Missing English translation for FML: assets/fml/lang/en_us.lang[18:37:13] [Server thread/INFO] [FML]: Attempting connection with missing mods [minecraft, mcp, FML, forge] at CLIENT[18:37:13] [Server thread/INFO] [FML]: Attempting connection with missing mods [minecraft, mcp, FML, forge] at SERVER[18:37:13] [Server thread/INFO] [FML]: Processing ObjectHolder annotations[18:37:13] [Server thread/INFO] [FML]: Found 1169 ObjectHolder annotations[18:37:13] [Server thread/INFO] [FML]: Identifying ItemStackHolder annotations[18:37:13] [Server thread/INFO] [FML]: Found 0 ItemStackHolder annotations[18:37:13] [Server thread/INFO] [FML]: Configured a dormant chunk cache size of 0[18:37:14] [Forge Version Check/INFO] [forge.VersionCheck]: [forge] Starting version check at http://files.minecraftforge.net/maven/net/minecraftforge/forge/promotions_slim.json[18:37:14] [Server thread/INFO] [FML]: Applying holder lookups[18:37:14] [Server thread/INFO] [FML]: Holder lookups applied[18:37:14] [Server thread/INFO] [FML]: Applying holder lookups[18:37:14] [Server thread/INFO] [FML]: Holder lookups applied[18:37:14] [Server thread/INFO] [FML]: Applying holder lookups[18:37:14] [Server thread/INFO] [FML]: Holder lookups applied[18:37:14] [Server thread/INFO] [FML]: Applying holder lookups[18:37:14] [Server thread/INFO] [FML]: Holder lookups applied[18:37:14] [Server thread/INFO] [FML]: Injecting itemstacks[18:37:14] [Server thread/INFO] [FML]: Itemstack injection complete[18:37:14] [Server thread/INFO] [minecraft/DedicatedServer]: Loading properties[18:37:14] [Server thread/INFO] [minecraft/DedicatedServer]: Default game type: SURVIVAL[18:37:14] [Server thread/INFO] [minecraft/DedicatedServer]: Generating keypair[18:37:14] [Server thread/INFO] [minecraft/DedicatedServer]: Starting Minecraft server on *:25565[18:37:14] [Server thread/INFO] [minecraft/NetworkSystem]: Using default channel type[18:37:14] [Forge Version Check/INFO] [forge.VersionCheck]: [forge] Found status: UP_TO_DATE Target: null[18:37:15] [Server thread/INFO] [FML]: Applying holder lookups[18:37:15] [Server thread/INFO] [FML]: Holder lookups applied[18:37:15] [Server thread/INFO] [FML]: Injecting itemstacks[18:37:15] [Server thread/INFO] [FML]: Itemstack injection complete[18:37:15] [Server thread/INFO] [FML]: Forge Mod Loader has successfully loaded 4 mods[18:37:15] [Server thread/INFO] [minecraft/DedicatedServer]: Preparing level "world"[18:37:15] [Server thread/INFO] [FML]: Injecting existing registry data into this server instance[18:37:15] [Server thread/INFO] [FML]: Applying holder lookups[18:37:15] [Server thread/INFO] [FML]: Holder lookups applied[18:37:16] [Server thread/INFO] [FML]: Loading dimension 0 (world) (net.minecraft.server.dedicated.DedicatedServer@6b0a3dfa)[18:37:17] [Server thread/INFO] [minecraft/AdvancementList]: Loaded 488 advancements[18:37:17] [Server thread/INFO] [FML]: Loading dimension -1 (world) (net.minecraft.server.dedicated.DedicatedServer@6b0a3dfa)[18:37:17] [Server thread/INFO] [FML]: Loading dimension 1 (world) (net.minecraft.server.dedicated.DedicatedServer@6b0a3dfa)[18:37:17] [Server thread/INFO] [minecraft/MinecraftServer]: Preparing start region for level 0[18:37:18] [Server thread/INFO] [minecraft/MinecraftServer]: Preparing spawn area: 26%[18:37:19] [Server thread/INFO] [minecraft/DedicatedServer]: Done (3.407s)! For help, type "help" or "?"[18:37:19] [Server thread/INFO] [FML]: Unloading dimension -1[18:37:19] [Server thread/INFO] [FML]: Unloading dimension 1[18:37:20] [Server thread/INFO] [minecraft/DedicatedServer]: Unknown command. Try /help for a list of commands[18:37:22] [Server thread/INFO] [minecraft/DedicatedServer]: Unknown command. Try /help for a list of commands[18:37:23] [Server thread/INFO] [minecraft/DedicatedServer]: Unknown command. Try /help for a list of commands[18:37:24] [Server thread/INFO] [minecraft/DedicatedServer]: Unknown command. Try /help for a list of commands[18:37:24] [Server thread/INFO] [minecraft/DedicatedServer]: Unknown command. Try /help for a list of commands[18:40:08] [Server thread/WARN] [minecraft/MinecraftServer]: Can't keep up! Did the system time change, or is the server overloaded? Running 7401ms behind, skipping 148 tick(s)

July 30, 20196 yr

That's a server starting and running (mostly)happily.

I don't see any issues here

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

July 31, 20196 yr

Author

it just starts and waits a min or two spitting out commands and then closes

July 31, 20196 yr

Ok... let it go through the motions, don't touch anything. When it closes send me the debug.log from the logs folder of the server.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

July 31, 20196 yr

Author

okay

July 31, 20196 yr

Author

https://drive.google.com/file/d/17vDMO1qPcEj7r9pmcm68AlPGRofSw09n/view?usp=sharing

July 31, 20196 yr

Try moving the server out of OneDrive, try updating to the latest version of Forge.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

July 31, 20196 yr

Author

its not in one drive?

is it?

July 31, 20196 yr

Unless you specifically tell Windows not to use OneDrive while installing Windows your user folders (Documents, Music, Pictures, Desktop, Videos, etc.) are put in OneDrive by default.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

July 31, 20196 yr

Author

how do i move it out of onedrive

August 1, 20196 yr

Just move it to some place that's not backed up by OneDrive, i.e. outside of your user folder.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

August 1, 20196 yr

Author

i did now what

August 1, 20196 yr

Try again

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

August 1, 20196 yr

Author

okay

August 1, 20196 yr

Author

it worked but when i added my mods the consel jus opend for like 5 sec then closed

August 1, 20196 yr

Provide logs

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

August 2, 20196 yr

Author

https://drive.google.com/file/d/1O3V93ptC1CcWP1Emt7IIyKhKvLjd6aCv/view?usp=sharing

August 2, 20196 yr

That's a 1.7.10 log

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

August 2, 20196 yr

Author

ik i was using mods on 1.7.10

August 2, 20196 yr

We were talking 1.12.2 earlier though...

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

August 2, 20196 yr

Author

okay ill try wth 1.12

August 2, 20196 yr

Author

it luanches but it doesent show anything in the mod tabs

Sign In

My forge modded server wont start

Featured Replies

Posts

Orbital strike cannon fishing rod mod

java.exe finished with non-zero exit value 1 error while runClient

java.util.ConcurrentModificationException: null - Exception in server tick loop

java.util.ConcurrentModificationException: null - Exception in server tick loop

Orbital strike cannon fishing rod mod

Who's Online (See full list)

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)