Jump to content
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

Mods Don’t Show [forge Problem?]

Skeppy

By Skeppy
in Support & Bug Reports

 Share

Recommended Posts

Skeppy Tree Puncher

Skeppy

Posted
Posted (edited)

I was Using Forge When i thought ehh, i got the mods idr need it now so i binned it and now all my settings and periferials are reset .

My Other Problem when I’m putting schematica in a file i named mods it doesn’t show up in my mod list anymore i don’t know if its just me or forge 

Edited by Skeppy
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Did you just say you removed Forge because you got your mods and didn't need it anymore?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Skeppy Tree Puncher

Skeppy

Posted
  • Author
Posted (edited)

@daemonUmbra   yes. but I’ve realised i need it but when i insert my schematica and launch minecraft The Mod doesn’t show in the list 

Edited by Skeppy
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Forge is what allows almost every mod to work in the first place, you know...

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Do you have Forge installed?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Skeppy Tree Puncher

Skeppy

Posted
  • Author
Posted (edited)

yes 1.12.2 and my schematica is 1.12.2 - 1.8.0.169 whatever that means im new to mods in general soz.

Edited by Skeppy
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Please restart your launcher and launch the game, then quit and immediately provide your launcher_log.txt from .minecraft

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Not sure I understand what you're saying... are you saying what I'm asking you to do is sketchy?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Skeppy Tree Puncher

Skeppy

Posted
  • Author
Posted

idk what im doing the launcher log is just a spam of the same thing and im sketched that i might leak something for lots of people to see

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

and you're so worried about possibly leaking info that you're afraid of providing a log that would help me identify your issue

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Hyper_Zero Tree Puncher

Hyper_Zero

Posted
Posted

...you come on here asking for help, then just decide "I'll get my brother to do it" why even bother with us then? You want us to remote control your pc or somethin? Cuz if someone was asking to do that, then I'd get why you'd be concerned.

DavidM World Shaper

DavidM

Posted
Posted (edited)
4 hours ago, Skeppy said:

Nrs , am i getting hacked or someting

No. We don’t care who you are or your personal information.

We can’t hack into someone’s computer from a client log, nor do we want to spend the time finding out useless information about some random guy on the internet.

Your logs help us narrow down the problem in order to help you; without your logs people cannot help you.

 

Stab in the dark: I suspect the mod you got are mislabeled and are not made for your current Minecraft version.

Edited by DavidM

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept