Forge 1.12.2 | installation&#039;s problem

- Share

Posted December 21, 2019 (edited)

hi!
i have some problems installing Forge 1.12.2.
i downloaded forge-1.12.2-14.23.5.2768-installer-win ( https://files.minecraftforge.net/maven/net/minecraftf .. ), tried to install it and got this result:

rheth.jpg.90804eb316230c8922558813c5924fa6.jpg

so i tried again:

fbndtnedr.jpg.371185b040af1a741af3fcced1585ff6.jpg

but when I pressed the button "play", everything stopped like this:

I waited about twenty minutes, but nothing changed. only the inscription " preparing..."and an empty load bar. it doesn't crash, it just doesn't started.

could you hel me please? what files do I need to show for this?

(sorry for my bad english)

Edited December 21, 2019 by HollowTune

Quote

Link to comment

Share on other sites

DaemonUmbra

- Share

Please provide your installer log

Quote

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

Link to comment

Share on other sites

HollowTune

Author

- Share

Spoiler

java.net.preferIPv4Stack=true
Considering library net.minecraftforge:forge:1.12.2-14.23.5.2768: Not Downloading {Wrong Side}
Considering library net.minecraft:launchwrapper:1.12: Not Downloading {Wrong Side}
Considering library org.ow2.asm:asm-all:5.2
Considering library org.jline:jline:3.5.1: Not Downloading {Wrong Side}
Considering library net.java.dev.jna:jna:4.4.0: Not Downloading {Wrong Side}
Considering library com.typesafe.akka:akka-actor_2.11:2.3.3
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\com\typesafe\akka\akka-actor_2.11\2.3.3\akka-actor_2.11-2.3.3.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library com.typesafe:config:1.2.1
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\com\typesafe\config\1.2.1\config-1.2.1.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-actors-migration_2.11:1.1.0
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-actors-migration_2.11\1.1.0\scala-actors-migration_2.11-1.1.0.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-compiler:2.11.1
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-compiler\2.11.1\scala-compiler-2.11.1.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang.plugins:scala-continuations-library_2.11:1.0.2
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\plugins\scala-continuations-library_2.11\1.0.2\scala-continuations-library_2.11-1.0.2.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang.plugins:scala-continuations-plugin_2.11.1:1.0.2
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\plugins\scala-continuations-plugin_2.11.1\1.0.2\scala-continuations-plugin_2.11.1-1.0.2.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-library:2.11.1
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-library\2.11.1\scala-library-2.11.1.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-parser-combinators_2.11:1.0.1
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-parser-combinators_2.11\1.0.1\scala-parser-combinators_2.11-1.0.1.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-reflect:2.11.1
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-reflect\2.11.1\scala-reflect-2.11.1.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-swing_2.11:1.0.1
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-swing_2.11\1.0.1\scala-swing_2.11-1.0.1.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library org.scala-lang:scala-xml_2.11:1.0.2
Checking "C:\Users\kalina\AppData\Roaming\.minecraft\libraries\org\scala-lang\scala-xml_2.11\1.0.2\scala-xml_2.11-1.0.2.jar" internal checksums
checksums.sha1 validated successfully
Jar contents validated successfully
Considering library lzma:lzma:0.0.1: Not Downloading {Wrong Side}
Considering library net.sf.jopt-simple:jopt-simple:5.0.3: Not Downloading {Wrong Side}
Considering library java3d:vecmath:1.5.2
Considering library net.sf.trove4j:trove4j:3.0.3
Considering library org.apache.maven:maven-artifact:3.5.3
Extracting: /forge-1.12.2-14.23.5.2768-universal.jar
To: C:\Users\kalina\AppData\Roaming\.minecraft\libraries\net\minecraftforge\forge\1.12.2-14.23.5.2768\forge-1.12.2-14.23.5.2768.jar

Quote

Link to comment

Share on other sites

DaemonUmbra

- Share

From that it looks like the jar was downloaded

Quote

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

Link to comment

Share on other sites

HollowTune

Author

- Share

so.. can you suggest anything?

this is not the first try to install forge (I tried to reinstall it, to reinstall the game and it), but each ended with this result.

Quote

Link to comment

Share on other sites

DaemonUmbra

- Share

If it exists, delete .minecraft/libraries/org/ow2/asm-all/asm-all-5.2.jar and try again

Quote

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

Link to comment

Share on other sites

HollowTune

Author

- Share

24 minutes ago, DaemonUmbra said:

If it exists, delete .minecraft/libraries/org/ow2/asm-all/asm-all-5.2.jar and try again

I tried. nothing has changed.

Quote

Link to comment

Share on other sites

DaemonUmbra

- Share

Are you sure you sent the correct log?

Quote

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

Link to comment

Share on other sites

HollowTune

Author

- Share

Posted December 22, 2019 (edited)

On 12/22/2019 at 4:45 AM, DaemonUmbra said:

Are you sure you sent the correct log?

I sent the contents of the file " installer.log", which was in the same folder as "forge-1.12.2-14.23.5.2768-installer-win". if I was wrong, where to find the right one?

Edited December 27, 2019 by HollowTune

Quote

Link to comment

Share on other sites

HollowTune

Author

- Share

I still have this problem. if you'll have any ideas for solution, please write.

Quote

Link to comment

Share on other sites

DaemonUmbra

- Share

The correct log is the one with the same name as the installer you ran, if you don't have one with a name that matches then delete the installer log and try installing again, then send the freshly generated log

Quote

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

Link to comment

Share on other sites

OKBOOMEER

- Share