Jump to content
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

Block combustible en 1.16.4

Indi_8

By Indi_8
in Support & Bug Reports

 Share

Recommended Posts

Indi_8 Tree Puncher

Indi_8

Posted
Posted (edited)

Hello, I am a beginner and I watched a tutorial about a block which is a fuel that can be put in a furnace. I found that it was necessary to use the "getBurnTime" however I cannot find it in 1.16.4. If it is not in the class of my block how can I make a class of the item of my block?

 

Edited by Indi_8
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

It looks like you'd need to extend BlockItem and override getBurnTime to do this, as getBurnTime is an Item method, not a Block method

  • Thanks 1

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



  • Recently Browsing

    • No registered users viewing this page.

  • Posts

    • Lizataro
      Croptopia Delight no funcia en mi pack de mods

      By Lizataro · Posted

      inicie un mundo donde instale Croptopia y Farmer's Delight, entonces instale el addon Croptopia Delight pero no funciona. es la version 1.18.2
    • Sandermall
      updateShape functionality deep dive

      By Sandermall · Posted

      Hello all. I'm currently grappling with the updateShape method in a custom class extending Block.  My code currently looks like this: The conditionals in CheckState are there to switch blockstate properties, which is working fine, as it functions correctly every time in getStateForPlacement.  The problem I'm running into is that when I update a state, the blocks seem to call CheckState with the position of the block which was changed updated last.  If I build a wall I can see the same change propagate across. My question thus is this: is updateShape sending its return to the neighbouring block?  Is each block not independently executing the updateShape method, thus inserting its own current position?  The first statement appears to be true, and the second false (each block is not independently executing the method). I have tried to fix this by saving the block's own position to a variable myPos at inception, and then feeding this in as CheckState(myPos) but this causes a worse outcome, where all blocks take the update of the first modified block, rather than just their neighbour.  This raises more questions than it answers, obviously: how is a different instance's variable propagating here?  I also tried changing it so that CheckState did not take a BlockPos, but had myPos built into the body - same problem. I have previously looked at neighbourUpdate and onNeighbourUpdate, but could not find a way to get this to work at all.  One post on here about updatePostPlacement and other methods has proven itself long superceded.  All other sources on the net seem to be out of date. Many thanks in advance for any help you might offer me, it's been several days now of trying to get this work and several weeks of generally trying to get round this roadblock.  - Sandermall
    • djdoyle1556
      crash dump

      By djdoyle1556 · Posted

      sorry, I might be stupid, but how do I open it? because the only options I have are too X out, copy it, which doesn't work and send crash report, which doesn't show it to me, also, sorry for taking so long.
    • Radio_Man
      Maybe wrong place to post but need help installing forge.

      By Radio_Man · Posted

      ah ok  
    • Choonster
      BUG: Cactus Flower Placement is BROKEN

      By Choonster · Posted

      Can you reproduce this with version 55.0.21? A whole lot of plant placement issues were just fixed in this PR.

  • Topics

  • Who's Online (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept