Jump to content

Forge 1.14.4 sever help


blackviper2104

Recommended Posts

1.14 is no longer supported.

Please update to 1.15 or 1.16 to receive support.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • How I Recovered Over €72,000 from a Scam Trading Broker in London with the Help of Adrian Lamo Hacker I’d like to share my recovery experience here from London, UK, with a scam trading broker to help others avoid falling into the same trap I did. Like many, I thought I was making a smart investment by trading online. I had heard stories of people earning substantial returns, so I was excited when I found a trading platform that seemed legitimate. However, little did I know, I was dealing with a scam. The broker I encountered was highly convincing. They promised me high returns and offered a professional-looking platform. I was persuaded by their smooth talk, testimonials, and fake success stories. Over time, I started transferring funds into the trading account they set up for me. My initial investments were small, but soon I transferred a significant amount—almost €72,620—hoping to see my account grow. Unfortunately, things took a sharp turn for the worse. Despite the early promises of returns, I was unable to withdraw any of my funds. Each time I requested to withdraw, I was met with endless excuses and delays. It became clear that I was dealing with a fraudulent broker, and my money was stuck in their fake account with no way of getting it back. I felt devastated and helpless. It was hard to believe that I had been scammed. However, after doing some research, I came across Adrian Lamo Hacker a company that specializes in recovering funds lost to scams. I was skeptical at first, but after reading positive reviews and testimonials, I decided to reach out for help. From the moment I contacted them through , the team was professional, understanding, and reassuring. They guided me through the recovery process step by step, and after some time, I was overjoyed to learn that my money had been successfully recovered. I’m incredibly grateful to Adrian Lamo Hacker for their expertise and hard work. They helped me get back what I thought was lost forever. If you’re reading this and have fallen victim to a similar scam, I urge you to reach out to a reputable recovery service like ADRIAN LAMO HACKER via Email: Adrianlamo @ consultant . com/ / Telegram ID: @ADRIANLAMOHACKERTECH Don’t give up on getting your money back. There are experts out there who can help, and I am proof that recovery is possible.
    • No se me descarga la carpeta de forge. Despues de darle a install y q me salte a la pagina de publicidad, espero los 5 segundos, le doy a skip pero en vez de descargarse del archivo del forge, se me descarga un .jar que es un bloc de notas, no me aparece la carpeta con la descarga por ningun lado 
    • Alright, well before removing IC2 I changed the max chunks from 15 to 6, and that seems to have fixed most of it, BUT, the console log keeps spamming out this "[16:01:09] [File IO Thread/WARN] [FML]: Large Chunk Detected: (11, 19) Size: 578 ./servermodworld2024oct/region/r.5.2.mca", and it is still lagging a little. What exactly does this mean and by some chance is this a chunk I can find and fix? If so how can I find it? After testing the server without IC2, the same error message still shows up, and the server continues to suffer in terms of lag.
    • I often can play and enjoy modded MC for a few hours each day after I start my computer, but then after a while it just stops Tried updating drivers on my Nividia card but not worked. I think it might be bad sectors I got on my RAM though, not sure this computer is over 7 years old and getting bit tired.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.