Jump to content

Resizing the Lightmap


Tiedye

Recommended Posts

Hi, I have been looking into creating a coloured light mod for Minecraft, and the far the best idea I have come up with would be to enlarge the lightmap that minecraft uses to render sky light and block light together.

 

However, to reference a point on the light map Minecraft uses a short coordinate value so light values (0-15) can be mapped directly to the texture.  The problem I am having is when I try to reference a point in a larger lightmap (say 32 by 32 or 4096 by 16) the coordinates simply do not map correctly and ever Google search I have done says shorts (16-bit integers) cannot be uses in the function minecraft uses to set texture coordinates (glTexCoordPointer) but minecraft obviously does use it.  I just don't get it.  I simply want to be able to use a larger lighmap.

 

If anyone want to see what I'm talking about in the minecraft source (MCP or forge), look up the Tessellator object and draw() in it.

 

If anyone has an explanation on how this function works with shorts or a helpful link please post. :)

  • Like 1
Link to comment
Share on other sites

Hi

 

Here's a little bit more background information, although it sounds like you might know it already.

 

http://greyminecraftcoder.blogspot.com.au/2013/08/lighting.html

 

The lightmap texture is set up in

EntityRenderer.enableLightmap()

 

The size is 256x256 (since the blocklight and skylight values are multiplied by 16 when they are stored in the "mixed brightness" number), i.e. each of the 16 blocklight x 16 skylight combinations has a 16x16 texels patch which is all the same colour.

 

( float f = 0.00390625F;  --> 1/f = 256,  i.e. the texels are scaled to each be 1/256 wide x 1/256 high)

 

I suspect (but I'm not sure) that the 16x16 texels patches is necessary because the block textures are also 16x16 texels in size.

 

Not sure how all this will help you, but if you figure it out I'm keenly interested...

 

-TGG

 

 

 

 

  • Like 1
Link to comment
Share on other sites

Thank you a bunch!  I was wondering why the texture coordinates were shifted 4 bits and had not discovered this function.  I'll look into it now and see what I can come up with.

 

Once again thanks a lot, I post again if I'm successful or run into any more problems. :)

  • Like 1
Link to comment
Share on other sites

Update:

Changing scaling to 1/4096 in the EntityRenderer.enableLightmap() function allowed me to change the size of the lightmap to 256 by 256 so I can fit both RGB and skylight values... and it worked!  The block light and skylight blended properly and colours also rendered correctly.  Now I have to implement the three block light values throughout the rest of minecraft and fix the ao calculations, but so far so good!

  • Like 1
Link to comment
Share on other sites

Alright, so I think I've got a good handle on how minecraft does it AO calculations and rendering and there is a problem.

 

When the blending for a block is rendered, each of the four corners of each face are assigned a brightness which is mixed (it is in the form of coordinates that points to somewhere on the lighmap).  So, when the face is rendered, each corner is given a texture coordinate that corresponds to a smooth version of this map:

 

LightMap.png

(pic from this very helpful blog post http://greyminecraftcoder.blogspot.ca/2013/08/lighting.html, thanks Ghost!)

 

So, when I try to do this with my enlarged lighmap (which is pretty much 256 of these lighmaps tacked together) the texture coordinates cover a very large area of the map and end up looking like this:

 

xo855s8.png

8fSPuXn.png

 

Not quite sure how to solve this, I tried setting the colour of the blocks but that was really finicky and not a good solution.  I am going to look into using multiple light textures and layer them to get good blending.

 

If anyone has any suggestions feel free to post 'em!  I'll post again if I have anything worth mentioning.

  • Like 1
Link to comment
Share on other sites

Hi

 

Wow that looks pretty impressive even if it wasn't the effect you were looking for!!

 

Looks like a tricky problem.  I think the issue is that you're trying to interpolate across four dimensions (R,G,B, skylight) in something that's only represented in two dimensions.

 

I'm not  familiar with OpenGL at all, but your idea of multitexturing with a total of three lightmaps (R * skylight, G * skylight, B * skylight) sounds like a good idea to try.  I also notice that textures can have up to four dimensions which might be another way to get the GFX card to do linear interpolation across four dimensions for you.  Don't ask me how because I'm just guessing!

 

Interesting challenge...

 

-TGG

 

Link to comment
Share on other sites

@TGG

Your 4D interpolation sounds like the best solution out of the two, except it will probable take the most to implement so I've tried the other way and I think it could work.  However I am also extremely new to OpenGL and am having lots of trouble trying to mix the texture with glTexEnvi calls, the solution's probably obvious to someone who knows what their doing. 

 

I've been able to make vanilla lighting work with the two lightmaps (skylight and blocklight, both 1x16 textures) but text stops rendering properly and colours don't work correctly (eg. grass colour, AO, and block shading).  I'll keep looking for a solution.  Any help would me most welcome!

 

EDIT: I took a quick look into it and 4D textures are not supported like I would have hoped and I think they're currently beyond me.

 

@GotoLink

I don't know if I exactly understand what you're suggesting, but Minecraft generates the lighmap once at the beginning of each frame and uses it to render the whole frame.  Changing it for each vertex would probably be incredibly laggy and yield unexpected results.  Thanks for the suggestion though. :)

 

 

Should I start a new topic to ask for help with the OpenGL problem?  Or just ask here?

Link to comment
Share on other sites

This is a very interesting project!

Awesome stuff mate :)

 

I'm sure you can just use this thread to ask about the gl stuff as well, its related and besides I'm sure this thread will be an interesting read for others diving into this kind of thing :D

If you guys dont get it.. then well ya.. try harder...

Link to comment
Share on other sites

@Mazetar

Thanks for the interest!  I'll go ahead and post some more stuff then.

 

Since in MC 1.7 their adding official support for shaders, I think they will be a better solution than screwing around with  the glTexEnv stuff (that feature was deprecated in OpenGL 1.3 I think and was added in 1999, almost 15 years old!).  So if anyone has any advice for using shaders for multi-textureing, don't be afraid to post!

 

I have had a look into it and I think it wont be too difficult, a very simple fragment shader will do the trick I think.  I'll just have to figure out how to sample the textures properly.

Link to comment
Share on other sites

If the project is finished, can you upload some screenshots and maybe make API of it, so other mods can use it too.

 

BTW, your project looks amazing!

Don't PM me with questions. They will be ignored! Make a thread on the appropriate board for support.

 

1.12 -> 1.13 primer by williewillus.

 

1.7.10 and older versions of Minecraft are no longer supported due to it's age! Update to the latest version for support.

 

http://www.howoldisminecraft1710.today/

Link to comment
Share on other sites

Hi again, just wanted to mention that was able to get a shader working where the glTexEnv failed with vanilla light.  So what that means is I made the lighting system use two lightmaps instead of one (skylight and blocklight) and combine them via a shader, and this worked with smooth lighting perfectly.  So that's a nice step forward. 

 

However, using the shader at only one step of rendering caused a lot of other things to render wrong (like held blocks and items).  This problem will probably be fixed when I finish going through everywhere in the code where the Tessallator.setBrightness member is accessed.

 

Also the first little test I made was made using vanilla MCP, no forge, and I'd like to make this forge compatible with an API and not break anything and forge has a few more things that need to be made compatible to work with this.  This will probably take quite a bit of time and tons of debugging to get it to work properly.  AND Minecraft 1.7 will add official support for shaders with will require a rewrite of the mod, which will probably take a good bit less time than the first.  All in all, don't hold your breath for a final version, it's going to take some time I think.

 

Also, any suggestions how you think the API should be layed out are welcome.

 

Tiedye

Link to comment
Share on other sites

I would suggest that for held items, that the light value just be grayscale lighting (i.e. like vanilla).  I don't think its really worth the overhead of trying to do calculated lighting on inventory items and ItemEntity objects.

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable.  If you think this is the case, JUST REPORT ME.  Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

 

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

 

DO NOT PM ME WITH PROBLEMS. No help will be given.

Link to comment
Share on other sites

Also, any suggestions how you think the API should be layed out are welcome.

 

If it would be possible, I'm sure being able to change the light colour based on metadata would be very useful, as many mods have coloured lamps now ;)

 

Either way, an API for this would be great! Best of luck!

Link to comment
Share on other sites

@Draco18s

I think when it comes down to it, not Including the coloured lighting may be more of a pain that including it due to fact that the default lightmap is being completely replaced, and since its being done with shaders the overhead should be essentially zero. :)

 

@luisc99

Thanks for the suggestion!  I'll be sure to do my best to add that, seems like an excellent idea.

 

One last thing, the 1.7 per-release just got released (Yay) so I'll be aiming to release this mod for that instead, so don't expect anything before 1.7.

Link to comment
Share on other sites

@Draco18s

I think when it comes down to it, not Including the coloured lighting may be more of a pain that including it due to fact that the default lightmap is being completely replaced, and since its being done with shaders the overhead should be essentially zero. :)

 

Point.

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable.  If you think this is the case, JUST REPORT ME.  Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

 

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

 

DO NOT PM ME WITH PROBLEMS. No help will be given.

Link to comment
Share on other sites

Another little update.

 

Note that I've been pretty busy with school stuff so that's why I've made so little progress, but here's a screenshot.

 

cUR76lO.png

 

Smooth lighting!  Its using the multi-lightmap with shaders idea and its working pretty well.  Do note however this is just a modification my original test that I used to make the not-smooth-lighting screenshot from before, so extremely incomplete (note black block in hand), and has no semblance of an API.  Just thought I'd post something so you know I haven't given it up.

  • Like 1
Link to comment
Share on other sites

That looks even impressiver than without smooth lightning.

Don't PM me with questions. They will be ignored! Make a thread on the appropriate board for support.

 

1.12 -> 1.13 primer by williewillus.

 

1.7.10 and older versions of Minecraft are no longer supported due to it's age! Update to the latest version for support.

 

http://www.howoldisminecraft1710.today/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.