Search the Forums BEFORE making a new post.

How do I make custom Inventory Gui texture that easy

Posted February 16, 20187 yr

I see a lot of mods making cool guis and dont get me wrong, they dont just edit it pixel by pixel especially the inventory. Do these modders use a program or they just use tool, armor, entity texture makers like photoshop or gimp.

Quote

February 16, 20187 yr

Could you provide a sample screen of what kind of GUIs you're talking about ? I might be interested in it !

Personally, I just recycle some existing GUIs from Minecraft. For instance, there is the demo_background.png located in the Minecraft assets (textures/gui). It helps me to prototype a canvas for a beginning. Still, I am really curious of how do other developers achieve their GUIs (especially when we are not specialized designers haha).

Squirrel ! Squirrel ! Squirrel !

Quote

February 17, 20187 yr

Author

10 hours ago, Major Squirrel said:

Could you provide a sample screen of what kind of GUIs you're talking about ? I might be interested in it !

Personally, I just recycle some existing GUIs from Minecraft. For instance, there is the demo_background.png located in the Minecraft assets (textures/gui). It helps me to prototype a canvas for a beginning. Still, I am really curious of how do other developers achieve their GUIs (especially when we are not specialized designers haha).

Quote

February 22, 20187 yr

I made a custom inventory GUI using Gimp. I started with the vanilla texture, then selected parts of it and moved them around. Some of it is pixel-by-pixel work. That's how I did the little arrows on my GUI, attached. I expect those four slots at the top of the screen you posted were done pixel by pixel, just like many item and block textures are done. Kind of tedious, but not too bad considering each inventory slot is only 16x16 pixels.

Edited February 22, 20187 yr by Daeruin
Image didn't come through

Quote

February 22, 20187 yr

Also, make sure your texture is 256x256 (you can leave the non-UI parts fully transparent)

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable. If you think this is the case, JUST REPORT ME. Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

DO NOT PM ME WITH PROBLEMS. No help will be given.

Quote

4 years later...

October 30, 20222 yr

I used the furnace GUI texture to make it. Is really easy

Quote

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.

Reply to this topic...

https://forums.minecraftforge.net/topic/63111-how-do-i-make-custom-inventory-gui-texture-that-easy/

Followers

Go to topic listing

IPS spam blocked by CleanTalk.

Announcements

How to change player renderer and transform model parts?

I have been trying for a while now to make a custom player renderer, and replace the vanilla player renderer with it. So far I've come up with a custom player renderer class that extends vanilla PlayerRenderer:
package com.FireDude123.BOTW.entity.renderer; import com.mojang.blaze3d.vertex.PoseStack; import net.minecraft.client.player.AbstractClientPlayer; import net.minecraft.client.renderer.MultiBufferSource; import net.minecraft.client.renderer.entity.player.PlayerRenderer; import net.minecraft.client.renderer.entity.EntityRendererProvider; import net.minecraftforge.client.event.RenderPlayerEvent; import net.minecraftforge.common.MinecraftForge; public class PoseablePlayerRenderer extends PlayerRenderer { public PoseablePlayerRenderer(EntityRendererProvider.Context ctx, boolean slim) { super(ctx, slim); System.out.println("here too"); } @Override public void render(AbstractClientPlayer p_117788_, float p_117789_, float p_117790_, PoseStack poseStack, MultiBufferSource p_117792_, int p_117793_) { System.out.println("didnt get here lol"); model.leftArm.xRot=(float)Math.toRadians(160); super.render(p_117788_, p_117789_, p_117790_, poseStack, p_117792_, p_117793_); } } As you can see, the intended purpose of this is to raise the player's left arm by 160 degrees. However, combined with this logic in ClientModEvents:
@Mod.EventBusSubscriber(modid = MODID, bus = Mod.EventBusSubscriber.Bus.MOD, value = Dist.CLIENT) public static class ClientModEvents { @SubscribeEvent public static void onClientSetup(FMLClientSetupEvent event) { EntityRenderers.register((EntityType<? extends AbstractClientPlayer>)(EntityType<?)EntityType.PLAYER, ctx -> new PoseablePlayerRenderer(ctx, true)); EntityRenderers.register(Entities.MAGNESIS_BLOCK.get(), com.FireDude123.BOTW.entity.renderer.BlockDisplayRenderer::new); EntityRenderers.register(Entities.REMOTE_BOMB.get(), ThrownItemRenderer::new); EntityRenderers.register(Entities.CRYONIS_ICE.get(), com.FireDude123.BOTW.entity.renderer.BlockDisplayRenderer::new); EntityRenderers.register(Entities.STASIS_BLOCK.get(), FallingBlockRenderer::new); } @SubscribeEvent public static void registerLayerDefinitions(EntityRenderersEvent.RegisterLayerDefinitions event) { event.registerLayerDefinition(new ModelLayerLocation(new ResourceLocation(BOTW.MODID, "paraglider"), "main"), ParagliderLayer::createBodyLayer); } }(I also have a paraglider layer here for something else, it's working perfectly fine, also I used the slim setting because the player is slim in 1.20.1 forge)
This logic isn't replacing the renderer, as far as I can tell. Can someone please advise as to why, and how to fix it?

By FireDude123 · Posted 14 hours ago14 hr
How to add my mob to another mod's biome in 1.20.1.

I'm on 1.20.1 and was wondering if there was a way to add a mob I am going to make to a other mod's biome (Regions Unexplored in this case). I am trying to figure this out before I start coding the mod. Could someone point me to a good guide on this? I saw some things about biome modifier's but all the resources are either to short, unhelpful or for a different version. Thanks in advance. (i am a beginner but i have java and modding knowledge so this isn't like a "i am new and don't know anything about coding" problem btw)

By ilov3gam3z · Posted 22 hours ago22 hr
Help with file conversion

Many Forge users seek help with file conversions. Similarly, managing your health can benefit from structured tools like the https://wellness-app.com/calculator/fasting-calculator/ and a free intermittent fasting calculator. These tools help you plan and personalize your fasting and eating windows based on your lifestyle and goals. By entering your preferred fasting duration and meal times, you receive a tailored schedule that makes intermittent fasting easier to follow. Just as mastering file conversions improves modding success, using a fasting calculator brings clarity and structure to your health routine, supporting better results over time.

By Brialeblanc · Yesterday at 10:34 AM1 day
Cobblemon invalid player data

Hi everyone, I keep getting "invalid player data" when trying to log onto my friend's server. Log analysis says to remove Night Lights and ImmediatelyFast, but that doesn't work. Any insight is appreciated

Log: https://mclo.gs/uj6pMkd

By CobbleDN · Posted Yesterday at 04:14 AM1 day
Bad pathfinding for big mobs (1.21.1)

I've struggled with this for way too long now, so I have decided to ask for some assistance here because there is almost no information about this online.

I made a hostile mob and I built it like this:
public static final Supplier<EntityType<Bunyip>> BUNYIP = ENTITY_TYPES.register("bunyip" , () -> EntityType.Builder. of(Bunyip::new, MobCategory.MONSTER).sized(3f, 2.5f).eyeHeight(1.75f).build("bunyip"));

However, I have discovered that a BoundingBox of 3 is too big for the vanilla pathfinding to work well. In fact, anything bigger than a block will not work well. This is especially noticeable when having it chase a player in a negative X and/or negative Z direction. The mob starts spinning, walking backwards, walking diagonally, etc.

I am using the Goal system:
protected void registerGoals() { super.registerGoals(); this.goalSelector.addGoal(1, new MeleeAttackGoal(this, 1.25, true)); this.targetSelector.addGoal(2, new NearestAttackableTargetGoal<>(this, Player.class, true, true)); }

This does not seem to be a me issue as the ravager, one of the biggest vanilla mobs, also struggles with proper pathfinding. I am a bit familiar with how Minecraft's pathfinding works, but not enough to make a pathfinding system from scratch (or at least not in a reasonable amount of time). Is there any way to fix this with some tweaks or will I have to make a custom pathfinding system?

By VictorEvers · Posted Tuesday at 08:42 PM1 day

3nzi
Astoxy

Sign In

How do I make custom Inventory Gui texture that easy

Featured Replies

Join the conversation

Posts

How to change player renderer and transform model parts?

How to add my mob to another mod's biome in 1.20.1.

Help with file conversion

Cobblemon invalid player data

Bad pathfinding for big mobs (1.21.1)

Who's Online (See full list)

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)