Jump to content
Search the Forums BEFORE making a new post.
Currently supported: All versions

My mod only works ClientSide...

JonTGN

By JonTGN
in Modder Support

 Share

Recommended Posts

JonTGN Tree Puncher

JonTGN

Posted
Posted

Hey guys. My mod works fine clientside, however when I load it up into my server it crashes. Attached below is my crash report as well as the source code for my mod. I feel like it has something to do with the proxy but I'm not entirely sure and I have absolutely no clue where to start, as I am coming from Python. I now understand Java a bit better, but please be precise so I can understand it well. Thanks :)

 

Also if you have time, one more issue I was trying to figure out how to do is make my entity have a random chance of equipping tools/armor.

 

GitHub: https://github.com/JonTGN/JonTGN-sMod

 

Thanks in advance guys. Would really like to see this appear on my server :)

crash-2018-12-30_17.48.41-server.txt

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

You need to do more reading on the concept of Sides, also please look at the lists in this thread:

Most of the issues mentioned in that thread come from people inheriting the bad habits of people who make YouTube videos about how to mod.

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Discult Creeper Killer

Discult

Posted
Posted
20 minutes ago, JonTGN said:

Hey guys. My mod works fine clientside, however when I load it up into my server it crashes. Attached below is my crash report as well as the source code for my mod. I feel like it has something to do with the proxy but I'm not entirely sure and I have absolutely no clue where to start, as I am coming from Python. I now understand Java a bit better, but please be precise so I can understand it well. Thanks :)

 

Also if you have time, one more issue I was trying to figure out how to do is make my entity have a random chance of equipping tools/armor.

 

GitHub: https://github.com/JonTGN/JonTGN-sMod

 

Thanks in advance guys. Would really like to see this appear on my server :)

crash-2018-12-30_17.48.41-server.txt

you need to make sure renders are done client side only. this line of code is an example of something that needs to be client only || RenderingRegistry.registerEntityRenderingHandler(EntityZombieKnight.class, new IRenderFactory<EntityZombieKnight>()

 

 

JonTGN Tree Puncher

JonTGN

Posted
  • Author
Posted (edited)

Ok sweet, so is it just a process of moving 

public static void registerEntityRenders()
    {
        RenderingRegistry.registerEntityRenderingHandler(EntityZombieKnight.class, new IRenderFactory<EntityZombieKnight>()
        {
            @Override
            public Render<? super EntityZombieKnight> createRenderFor(RenderManager manager)
            {
                    return new RenderZombieKnight(manager);
            }
        });
    }

 

into clientProxy and reassigning this^ in like registry handler to go to clientproxy instead?

 

 

Or do I just move that one line? How would that work?

Edited by JonTGN
Discult Creeper Killer

Discult

Posted
Posted

read up on @SideOnly if you dont understand this but add the sideonly annotation to the registerEntityRenders() method and see if that fixes it. run a test server in the IDE

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

@SideOnly will not magically make sided code run on the wrong side, it will cause the game to crash with NoClassDefFound.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

JonTGN Tree Puncher

JonTGN

Posted
  • Author
Posted

So what would you recommend? From the crash report, what are the lines of code that need to be loaded on client/server and how would I move them over..

JonTGN Tree Puncher

JonTGN

Posted
  • Author
Posted

I read this: A very common mistake in beginners is to call Minecraft.getMinecraft().<doStuff>() in block or tile entity classes, which will crash any physical server as soon as the class is loaded. which makes sense. What doesn't make sense is where this is happening at and what exactly I need to annotate/move to make it work.

Cadiboo Reality Controller

Cadiboo

Posted
Posted
16 minutes ago, JonTGN said:

where this is happening at

Wherever the code crashes at

16 minutes ago, JonTGN said:

what exactly I need to annotate/move to make it work.

Move the crashing code to the proper side. I usually put all my rendering registration in the model registry event

About Me

Spoiler

My Discord - Cadiboo#8887

My Website - Cadiboo.github.io

My Mods - Cadiboo.github.io/projects

My Tutorials - Cadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept