Jump to content
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

My mods on forge

Leonardo Romano

By Leonardo Romano
in Support & Bug Reports

 Share

Recommended Posts

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Please read the Logs section of my signature below and provide the appropriate log in the appropriate manner.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DatrixTHLK Tree Puncher

DatrixTHLK

Posted
Posted (edited)

I'm not the only one experiencing this issue it seems.

 

Minecraft 1.14.4

Forge: 28.1.39

FML Report: https://gist.github.com/DatrixTHLK/396334eb462d6a33fbb1e7b33a50e5a3

 

Picture #1: Shows Minecraft with no mods loaded (obviously)
Picture #2: Shows the mods page where the mods should be loaded

Picture #3: Mods Folder inside the .minecraft folder where mods are right now

Picture #4: When going into minecraft the game is broken.

 

My mods are in the correct folder yet forge isn't registering or recognizing them as being there.

If I missed any information let me know or just ignore me.

Spoiler

2019-10-06 (3).png2019-10-06 (5).png2019-10-06 (7).png1034975587_2019-10-06(8).thumb.png.54ba5f5fa28e3440e6869dce0f0bc8b7.png

 

Edited by DatrixTHLK
Edited some extra picture information
Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Remove FastFurnace

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DatrixTHLK Tree Puncher

DatrixTHLK

Posted
Posted (edited)

Still looks the same without FastFurnace.

 

I took out every mod except 10 of them. Still get no mods loaded.

Report: https://gist.github.com/DatrixTHLK/1ee41fc2bd5bc83eae3701cc8f5b6f1f

 

Re-Edit: I took out all 90 mods and now the game seems to register I have 2 mods loaded which one is FML and the other is Forge. I can only assume one of two things Forge doesn't register any of them due to a bug or all the mods I have are in need of updating. Which number two is not viable because I've been updating each mod as they come out and usually forge breaks a few mods not all of them and if it does it will tell us what mods broke within a crash log. Oh well I'll just wait until forge updates and I'll go back a few versions to when all the mods actually worked. Which last I checked was 28.1.30

 

Re-Edit Again: Ok 28.1.30 is showing the same error as 39 is. What kind of witchcraft is going on here? I'll go back several more to 28.1.24 that version seems to work just fine with the mods I have.

Edited by DatrixTHLK
Missing Needed information
Link to comment
Share on other sites
Animefan8888 Reality Controller

Animefan8888

Posted
Posted
47 minutes ago, DatrixTHLK said:

I took out every mod except 10 of them. Still get no mods loaded.

It looks like assisted progression isn't compatible with the updated forge versions. Something it is doing is causing them to error and then kill the whole mod loading process.
 

Quote
net.minecraftforge.fml.ModLoadingException: Mod §eassistedprogression§r requires §6nucleus§r §o1.14.4 or above§r

§7Currently, §6nucleus§r§7 is §o§nnot installed

 

VANILLA MINECRAFT CLASSES ARE THE BEST RESOURCES WHEN MODDING

I will be posting 1.15.2 modding tutorials on this channel. If you want to be notified of it do the normal YouTube stuff like subscribing, ect.

Forge and vanilla BlockState generator.

Link to comment
Share on other sites
DatrixTHLK Tree Puncher

DatrixTHLK

Posted
Posted (edited)

If these problems occured, wouldn't forge be smart enough to say "hey you are missing something!" instead of loading into minecraft with an error saying no mods were loaded? Just sounds more logical to me. And, yes, I was missing the nucleus API for a mod I downloaded and Enemy Z was having it's own issues. This wasn't made apparent to me until I went back to Forge 28.1.24 which is where it told me point blank I'm missing a mod that is important. Thanks for that help! I knew the problem couldn't have been FastFurnace.

 

Also, what is the point of the "§" within the FML report?

Edited by DatrixTHLK
Link to comment
Share on other sites
Animefan8888 Reality Controller

Animefan8888

Posted
Posted
2 hours ago, DatrixTHLK said:

Also what is the point of the "§" within the FML report?

No clue it might be a unicode error of some sort.

 

2 hours ago, DatrixTHLK said:

If these problems occured wouldn't forge be smart enough to say "hey you are missing something!" instead of loading into minecraft with an error saying no mods were loaded?

It normally is, however it might be a bug or a change in forge that caused that mod to not be specifying something new or semi incorrectly.

VANILLA MINECRAFT CLASSES ARE THE BEST RESOURCES WHEN MODDING

I will be posting 1.15.2 modding tutorials on this channel. If you want to be notified of it do the normal YouTube stuff like subscribing, ect.

Forge and vanilla BlockState generator.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept