Jump to content
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

Client Side Mods - mismatched mod channel list

xanela

By xanela
in Support & Bug Reports

 Share

Recommended Posts

xanela Tree Puncher

xanela

Posted
Posted

My client side mods like Vehicles from Mrcrayfish has problems with server and it requires to install that to my self hosted server. All I want to do is just require mods that installed in server to be required for client side.

 

For further information: if i have one more extra mod than server it says 'mismatched mod channel list' and doesn't connect and either I need to uninstall that from my launcher or install that mod to server. But i don't want to do that for my client sided extra mods. I already have every mode my server had. I hope I could explain myself.

xanela Tree Puncher

xanela

Posted
  • Author
Posted
14 minutes ago, diesieben07 said:

This is a thing mod authors decide. A mod can tell Forge that it requires to be installed on the server or not. Talk to the mod authors.

So if i installed a mod and server needs to do that even that server is not mine? Aren't any command lines or properties file for just disabling it so a mod can not tell Forge that it requires to be installed on the server.

xanela Tree Puncher

xanela

Posted
  • Author
Posted
13 hours ago, diesieben07 said:

No. This is a matter of the mod itself. If the mod requires installation on the server to function properly, then it will tell Forge so and Forge will issue this error message

So I need to ask for hypixel to install it if i had that mod installed on me or uninstall it?

sciwhiz12 Diamond Finder

sciwhiz12

Posted
Posted

If you're connecting to a server, modded or vanilla, and you have mods which are not client-side only, you either remove those mods, or ask the server if they'll install the mod (and Forge, if needed).

DavidM World Shaper

DavidM

Posted
Posted (edited)
47 minutes ago, xanela said:

So I need to ask for hypixel to install it if i had that mod installed on me or uninstall it?

If the server does not have common mods installed, then you cannot have them when connecting to the server.

 

Hypixel is a vanilla server, and they will likely never change that, so you will have to remove the aforementioned mods if you want to play on Hypixel.

Edited by DavidM

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Vehicles is not a client side mod... where did you get that idea?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



  • Recently Browsing

    • No registered users viewing this page.

  • Posts

    • HOTDOGKING272829
      Could somebody help with my modpack not working

      By HOTDOGKING272829 · Posted

      logs too big for one pastebin https://pastebin.com/ZjUGHu3u  https://pastebin.com/RqCUZf3X  https://pastebin.com/6ZPS99nD
    • Martingonn
      Decompile minecraft INDEV?

      By Martingonn · Posted

      You probably used jd-gui to open it, didn't you? Nothing wrong with that, I also made that mistake, except that Notch was a smart guy and he obfuscated the code. That's why you only see files called "a", "b", "c" and then a file that combines them all. As I said, use RetroMCP to deobfuscate the code so that you will 100% understand it and be able to navigate it.
    • Martingonn
      Decompile minecraft INDEV?

      By Martingonn · Posted

      Decompiling minecraft indev, infdev, alpha, beta or whichever legacy version is really easy. I'm not a plug, I just also got interested in modding legacy versions (Infdev to be specific). Use https://github.com/MCPHackers/RetroMCP-Java Once you install their client and the Zulu Architecture that they say they recommend (or use your own Java). I encountered some problems, so I run it with: "java -jar RetroMCP-Java-CLI.jar". You should run it in a seperate folder (not in downloads), otherwise the files and folders will go all over the place. How to use RetroMCP: Type setup (every time you want change version), copy-paste the version number from their list (they support indev), write "decompile" and done! The code will now be deobfuscated and filenames will be normal, instead of "a", "b" and "c"! Hope I helped you, but I don't expect you to reply, as this discussion is 9 years old! What a piece of history!  
    • Orichalcum
      Getting Holder<Enchantment> from RegistryKey in GLM

      By Orichalcum · Posted

      I know that this may be a basic question, but I am very new to modding. I am trying to have it so that I can create modified Vanilla loot tables that use a custom enchantment as a condition (i.e. enchantment present = item). However, I am having trouble trying to implement this; the LootItemRandomChanceWithEnchantedBonusCondition constructor needs a Holder<Enchantment> and I am unable to use the getOrThrow() method on the custom enchantment declared in my mod's enchantments class. Here is what I have so far in the GLM:   protected void start(HolderLookup.Provider registries) { HolderLookup.RegistryLookup<Enchantment> registrylookup = registries.lookupOrThrow(Registries.ENCHANTMENT); LootItemRandomChanceWithEnchantedBonusCondition lootItemRandomChanceWithEnchantedBonusCondition = new LootItemRandomChanceWithEnchantedBonusCondition(0.0f, LevelBasedValue.perLevel(0.07f), registrylookup.getOrThrow(*enchantment here*)); this.add("nebu_from_deepslate", new AddItemModifier(new LootItemCondition[]{ LootItemBlockStatePropertyCondition.hasBlockStateProperties(Blocks.DEEPSLATE).build(), LootItemRandomChanceCondition.randomChance(0.25f).build(), lootItemRandomChanceWithEnchantedBonusCondition }, OrichalcumItems.NEBU.get())); }   Inserting Enchantments.[vanilla enchantment here] actually works but trying to declare an enchantment from my custom enchantments class as [mod enchantment class].[custom enchantment] does not work even though they are both a ResourceKey and are registered in Registries.ENCHANTMENT. Basically, how would I go about making it so that a custom enchantment declared as a ResourceKey<Enchantment> of value ResourceKey.create(Registries.ENCHANTMENT, ResourceLocation.fromNamespaceAndPath([modid], [name])), declared in a seperate enchantments class, can be used in the LootItemRandomChanceWithEnchantedBonusCondition constructor as a Holder? I can't use getOrThrow() because there is no level or block entity/entity in the start() method and it is running as datagen. It's driving me nuts.
    • NezumiMaus5
      cant find out what causing these errors (crash log below) Mixin config bbb.mixins.json does not specify "minVersion" property

      By NezumiMaus5 · Posted

      https://paste.ee/p/lw0XkwYJ

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept