Jump to content
Currently supported: All versions

Are Forge and Optifine not compatible in 1.14.4?

Jessara

By Jessara
in General Discussion

 Share

Recommended Posts

Jessara Tree Puncher

Jessara

Posted
Posted

I've been trying to use Forge and Optifine together by putting Optifine in the mods folder. I'm using minecraft 1.14.4. Whilst loading, it states that Optifine is not supported. So my question is... Is it Forge that isn't compatible with Optifine, or is it Optifine that isn't compatible with Forge?

 

In short... who needs to fix this issue? Forge, or Optifine :)

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted (edited)

This is on Optifine, and they do have a version that is compatible with at least one version of Forge, however it is a preview version and the only one of its kind at the moment.

Edit: and even then it's only designed to be compatible with one version of Forge, a version that is now obsolete.

Edited by DaemonUmbra

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted
1 hour ago, Kaede1 said:

no mods are really out yet

I find that to be factually false.

Please do tell where you are getting your info from.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Jessara Tree Puncher

Jessara

Posted
  • Author
Posted

I'm using Forge for 1.14.4 and at the very least I know that Xaero's minimap works just fine. Not sure about other mods because I'm kinda a vanilla gal in singleplayer :)

 

But I do really want to use Optifine with Forge so I guess I'll wait until Optifine gets their rear-end in gear. Thanks for the answer, DaemonUmbra

Jessara Tree Puncher

Jessara

Posted
  • Author
Posted

Actually I take back my previous statement. Xaero's was working fine yesterday... today it won't stay loaded in Forge  (I'm using forge-1.14.4-28.1.10-installer.jar) . This is so aggrevating. I'm just gonna go back to Optifine cuz I like the video options more than a minimap that doesn't work half the time with Forge. Can't get other mods to work either. I love 1.14 but geeez it don't like to play nice with anything...  :(

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Before 28.1 everything was in flux and things couldn't be expected to stay compatible, now with 28.1 out that is the earliest version that mods should target, some still target the beta and need updates

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

LexManos Reality Controller

LexManos

Posted
Posted

"The mod I like isn't out, so no mods are out!" That argument doesn't fly.

Anyways, This has been asked and answered.

I do Forge for free, however the servers to run it arn't free, so anything is appreciated.
Consider supporting the team on Patreon

Guest
This topic is now closed to further replies.
 Share
Go to topic listing

Announcements



  • Recently Browsing

    • No registered users viewing this page.

  • Posts

    • Ugdhar
      having trouble installing forge

      By Ugdhar · Posted

      Please post logs as described in the FAQ (https://forums.minecraftforge.net/topic/125488-rules-and-frequently-asked-questions-faq/), they will contain information that may help.  
    • packetdesyncing
      How to modify player head pitch?

      By packetdesyncing · Posted

      I've been trying to find a solution for this for the past few days and cant seem to find it anywhere.   What i want to do is basically set my player's head pitch without the server noticing it. Basically client-side change.   Is there a way to do this? With mixins or anything else?   Thanks in advance.
    • Atomic.Bearry
      Forge on minecraft client wont start

      By Atomic.Bearry · Posted

      Did you ever find a solution to this
    • DroidCrafter23
      WorldGen: Files not generating

      By DroidCrafter23 · Posted

      I have followed a tutorial on how to generate ores for my mod though the data files have not been generated despite me running data in my IDE.  I have looked over and compared my code multiple times and the only differences are either with the IDs or with unnecessary code because of what my mod is (The mod is for the End so I don't need the Overworld or Nether ores), my folders are all in the right structure and no warnings are present when ran. I have been trying to figure this out for a few days now so help would be much appreciated.  The tutorial I was following.  My code -  public class ModBiomeModifiers { public static final ResourceKey<BiomeModifier> ADD_GAZITE_ORE = registerKey("add_gazite_ore"); public static final ResourceKey<BiomeModifier> TRANSCENDINE_GAZITE_ORE = registerKey("add_transcendine_ore"); public static void bootstrap(BootstrapContext<BiomeModifier> context) { var placedFeature = context.lookup(Registries.PLACED_FEATURE); var biomes = context.lookup(Registries.BIOME); context.register(ADD_GAZITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_END), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.GAZITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); context.register(TRANSCENDINE_GAZITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_END), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.TRANSCENDINE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); } private static ResourceKey<BiomeModifier> registerKey(String name) { return ResourceKey.create(ForgeRegistries.Keys.BIOME_MODIFIERS, ResourceLocation.fromNamespaceAndPath(EchoingEnd.MOD_ID, name)); } } The tutorial's code -  public class ModBiomeModifiers { public static final ResourceKey<BiomeModifier> ADD_ALEXANDRITE_ORE = registerKey("add_alexandrite_ore"); public static final ResourceKey<BiomeModifier> ADD_NETHER_ALEXANDRITE_ORE = registerKey("add_nether_alexandrite_ore"); public static final ResourceKey<BiomeModifier> ADD_END_ALEXANDRITE_ORE = registerKey("add_end_alexandrite_ore"); public static void bootstrap(BootstrapContext<BiomeModifier> context) { var placedFeature = context.lookup(Registries.PLACED_FEATURE); var biomes = context.lookup(Registries.BIOME); context.register(ADD_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_OVERWORLD), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.ALEXANDRITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); // Individual Biomes // context.register(ADD_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( // HolderSet.direct(biomes.getOrThrow(Biomes.PLAINS), biomes.getOrThrow(Biomes.BAMBOO_JUNGLE)), // HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.ALEXANDRITE_ORE_PLACED_KEY)), // GenerationStep.Decoration.UNDERGROUND_ORES)); context.register(ADD_NETHER_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_NETHER), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.NETHER_ALEXANDRITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); context.register(ADD_END_ALEXANDRITE_ORE, new ForgeBiomeModifiers.AddFeaturesBiomeModifier( biomes.getOrThrow(BiomeTags.IS_END), HolderSet.direct(placedFeature.getOrThrow(ModPlacedFeatures.END_ALEXANDRITE_ORE_PLACED_KEY)), GenerationStep.Decoration.UNDERGROUND_ORES)); } private static ResourceKey<BiomeModifier> registerKey(String name) { return ResourceKey.create(ForgeRegistries.Keys.BIOME_MODIFIERS, ResourceLocation.fromNamespaceAndPath(TutorialMod.MOD_ID, name)); } }   ModConfiguredFeatures:   My code -  public class ModConfiguredFeatures { public static final ResourceKey<ConfiguredFeature<?, ?>> GAZITE_ORE_KEY = registerKey("gazite_ore"); public static final ResourceKey<ConfiguredFeature<?, ?>> TRANSCENDINE_ORE_KEY = registerKey("transcendine_ore"); public static void bootstrap(BootstrapContext<ConfiguredFeature<?, ?>> context) { RuleTest endReplaceables = new BlockMatchTest(Blocks.END_STONE); register(context, GAZITE_ORE_KEY, Feature.ORE, new OreConfiguration(endReplaceables, ModBlocks.GAZITE_ORE.get().defaultBlockState(), 4)); register(context, TRANSCENDINE_ORE_KEY, Feature.ORE, new OreConfiguration(endReplaceables, ModBlocks.TRANSCENDINE_ORE.get().defaultBlockState(), 8)); List<OreConfiguration.TargetBlockState> EndOres = List.of( OreConfiguration.target(endReplaceables, ModBlocks.GAZITE_ORE.get().defaultBlockState()), OreConfiguration.target(endReplaceables, ModBlocks.TRANSCENDINE_ORE.get().defaultBlockState())); } public static ResourceKey<ConfiguredFeature<?, ?>> registerKey(String name) { return ResourceKey.create(Registries.CONFIGURED_FEATURE, ResourceLocation.fromNamespaceAndPath(EchoingEnd.MOD_ID, name)); } private static <FC extends FeatureConfiguration, F extends Feature<FC>> void register(BootstrapContext<ConfiguredFeature<?, ?>> context, ResourceKey<ConfiguredFeature<?, ?>> key, F feature, FC configuration) { context.register(key, new ConfiguredFeature<>(feature, configuration)); } }   The tutorial's code - public class ModConfiguredFeatures { public static final ResourceKey<ConfiguredFeature<?, ?>> OVERWORLD_ALEXANDRITE_ORE_KEY = registerKey("alexandrite_ore"); public static final ResourceKey<ConfiguredFeature<?, ?>> NETHER_ALEXANDRITE_ORE_KEY = registerKey("nether_alexandrite_ore"); public static final ResourceKey<ConfiguredFeature<?, ?>> END_ALEXANDRITE_ORE_KEY = registerKey("end_alexandrite_ore"); public static void bootstrap(BootstrapContext<ConfiguredFeature<?, ?>> context) { RuleTest stoneReplaceables = new TagMatchTest(BlockTags.STONE_ORE_REPLACEABLES); RuleTest deepslateReplaceables = new TagMatchTest(BlockTags.DEEPSLATE_ORE_REPLACEABLES); RuleTest netherrackReplaceables = new BlockMatchTest(Blocks.NETHERRACK); RuleTest endReplaceables = new BlockMatchTest(Blocks.END_STONE); List<OreConfiguration.TargetBlockState> overworldAlexandriteOres = List.of( OreConfiguration.target(stoneReplaceables, ModBlocks.ALEXANDRITE_ORE.get().defaultBlockState()), OreConfiguration.target(deepslateReplaceables, ModBlocks.ALEXANDRITE_DEEPSLATE_ORE.get().defaultBlockState())); register(context, OVERWORLD_ALEXANDRITE_ORE_KEY, Feature.ORE, new OreConfiguration(overworldAlexandriteOres, 9)); register(context, NETHER_ALEXANDRITE_ORE_KEY, Feature.ORE, new OreConfiguration(netherrackReplaceables, ModBlocks.ALEXANDRITE_NETHER_ORE.get().defaultBlockState(), 9)); register(context, END_ALEXANDRITE_ORE_KEY, Feature.ORE, new OreConfiguration(endReplaceables, ModBlocks.ALEXANDRITE_END_ORE.get().defaultBlockState(), 9)); } public static ResourceKey<ConfiguredFeature<?, ?>> registerKey(String name) { return ResourceKey.create(Registries.CONFIGURED_FEATURE, ResourceLocation.fromNamespaceAndPath(TutorialMod.MOD_ID, name)); } private static <FC extends FeatureConfiguration, F extends Feature<FC>> void register(BootstrapContext<ConfiguredFeature<?, ?>> context, ResourceKey<ConfiguredFeature<?, ?>> key, F feature, FC configuration) { context.register(key, new ConfiguredFeature<>(feature, configuration)); } }   ModPlacedFeatures:   My code - public class ModPlacedFeatures { public static final ResourceKey<PlacedFeature> GAZITE_ORE_PLACED_KEY = registerKey("gazite_ore_placed"); public static final ResourceKey<PlacedFeature> TRANSCENDINE_ORE_PLACED_KEY = registerKey("transcendine_ore_placed"); public static void bootstrap(BootstrapContext<PlacedFeature> context) { var configuredFeatures = context.lookup(Registries.CONFIGURED_FEATURE); register(context, GAZITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.GAZITE_ORE_KEY), ModOrePlacement.commonOrePlacement(9, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(71)))); register(context, TRANSCENDINE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.GAZITE_ORE_KEY), ModOrePlacement.rareOrePlacement(6, HeightRangePlacement.uniform(VerticalAnchor.absolute(-32), VerticalAnchor.absolute(71)))); } private static ResourceKey<PlacedFeature> registerKey(String name) { return ResourceKey.create(Registries.PLACED_FEATURE, ResourceLocation.fromNamespaceAndPath(EchoingEnd.MOD_ID, name)); } private static void register(BootstrapContext<PlacedFeature> context, ResourceKey<PlacedFeature> key, Holder<ConfiguredFeature<?, ?>> configuration, List<PlacementModifier> modifiers) { context.register(key, new PlacedFeature(configuration, List.copyOf(modifiers))); } }   the tutorial's code -  public class ModPlacedFeatures { public static final ResourceKey<PlacedFeature> ALEXANDRITE_ORE_PLACED_KEY = registerKey("alexandrite_ore_placed"); public static final ResourceKey<PlacedFeature> NETHER_ALEXANDRITE_ORE_PLACED_KEY = registerKey("nether_alexandrite_ore_placed"); public static final ResourceKey<PlacedFeature> END_ALEXANDRITE_ORE_PLACED_KEY = registerKey("end_alexandrite_ore_placed"); public static void bootstrap(BootstrapContext<PlacedFeature> context) { var configuredFeatures = context.lookup(Registries.CONFIGURED_FEATURE); register(context, ALEXANDRITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.OVERWORLD_ALEXANDRITE_ORE_KEY), ModOrePlacement.commonOrePlacement(12, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(80)))); register(context, NETHER_ALEXANDRITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.NETHER_ALEXANDRITE_ORE_KEY), ModOrePlacement.commonOrePlacement(12, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(80)))); register(context, END_ALEXANDRITE_ORE_PLACED_KEY, configuredFeatures.getOrThrow(ModConfiguredFeatures.END_ALEXANDRITE_ORE_KEY), ModOrePlacement.commonOrePlacement(12, HeightRangePlacement.uniform(VerticalAnchor.absolute(-64), VerticalAnchor.absolute(80)))); } private static ResourceKey<PlacedFeature> registerKey(String name) { return ResourceKey.create(Registries.PLACED_FEATURE, ResourceLocation.fromNamespaceAndPath(TutorialMod.MOD_ID, name)); } private static void register(BootstrapContext<PlacedFeature> context, ResourceKey<PlacedFeature> key, Holder<ConfiguredFeature<?, ?>> configuration, List<PlacementModifier> modifiers) { context.register(key, new PlacedFeature(configuration, List.copyOf(modifiers))); } }   ModOrePlacement:   My code -  public class ModOrePlacement { public static List<PlacementModifier> orePlacement(PlacementModifier pCountPlacement, PlacementModifier pHeightRange) { return List.of(pCountPlacement, InSquarePlacement.spread(), pHeightRange, BiomeFilter.biome()); } public static List<PlacementModifier> commonOrePlacement(int pCount, PlacementModifier pHeightRange) { return orePlacement(CountPlacement.of(pCount), pHeightRange); } public static List<PlacementModifier> rareOrePlacement(int pChance, PlacementModifier pHeightRange) { return orePlacement(RarityFilter.onAverageOnceEvery(pChance), pHeightRange); } }   The tutorial's code -  public class ModOrePlacement { public static List<PlacementModifier> orePlacement(PlacementModifier pCountPlacement, PlacementModifier pHeightRange) { return List.of(pCountPlacement, InSquarePlacement.spread(), pHeightRange, BiomeFilter.biome()); } public static List<PlacementModifier> commonOrePlacement(int pCount, PlacementModifier pHeightRange) { return orePlacement(CountPlacement.of(pCount), pHeightRange); } public static List<PlacementModifier> rareOrePlacement(int pChance, PlacementModifier pHeightRange) { return orePlacement(RarityFilter.onAverageOnceEvery(pChance), pHeightRange); } }  
    • MarkSDR
      Error when trying to connect to a local server: java.lang.negativearraysizeexception -1

      By MarkSDR · Posted

      I'm creating a modpack, and i just discovered that if i try to connect to a server it gives the error: Internal Exception: io.netty.handler.codec.DecoderException: java.lang.negativearraysizeexception -1   The client log:  

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept