TheYafe Posted July 29, 2018 Posted July 29, 2018 I'm playing with friend at server with 10 mods and all the time the server is very stuck and crashing. Its shows me at the control panel that i using 200mb 50% of my ram. I have a I7-7700k 16gb So how i can to add more ram to the server? 1
PulseBeat_02 Posted July 30, 2018 Posted July 30, 2018 I am assuming you play on Windows since you siad i7-7700k. The type of computer is not what matters, it is the RAM. Don't you have a bat file that makes you run the server? Don't always just click on jar file to start the server. If you don't have a bat file, make one. To do this go to your text editor and make a new file. Inside that new file, write "java -Xmx [Most RAM Wanted] -Xms [Least RAM Wanted] -jar [Name for the jar of your minecraft server] .jar nogui". Fill in the brackets and paste it into your text editor. (Make sure to delete quotations!) The most RAM wanted is the maximum RAM you want to allocate to your server. The Least RAM Wanted is the least amount of RAM you want to allocate to your server. In my opinion, I suggest you to use 4GB for the most RAM wanted and 1GB for the least RAM wanted. The command for this would be: java -Xmx4G -Xms1G -jar [Name for the jar of your minecraft server] .jar nogui If it keeps crashing, keep adding more RAM but don't add more then 8GB. Hope this helps!
vpontin Posted July 30, 2018 Posted July 30, 2018 3 hours ago, PulseBeat_02 said: If it keeps crashing, keep adding more RAM but don't add more then 8GB. Hope this helps! Care to explain why not add more than 8GB?
DaemonUmbra Posted July 30, 2018 Posted July 30, 2018 The more RAM you add the longer Garbage Collection could potentially take to run AFAIK 1 This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Ugdhar Posted July 30, 2018 Posted July 30, 2018 https://vazkii.us/p/a-semi-technical-explanation-of-why-you-shouldnt-allocate-too-much-ram-to-minecraft/
TheYafe Posted July 30, 2018 Author Posted July 30, 2018 8 hours ago, PulseBeat_02 said: I am assuming you play on Windows since you siad i7-7700k. The type of computer is not what matters, it is the RAM. Don't you have a bat file that makes you run the server? Don't always just click on jar file to start the server. If you don't have a bat file, make one. To do this go to your text editor and make a new file. Inside that new file, write "java -Xmx [Most RAM Wanted] -Xms [Least RAM Wanted] -jar [Name for the jar of your minecraft server] .jar nogui". Fill in the brackets and paste it into your text editor. (Make sure to delete quotations!) The most RAM wanted is the maximum RAM you want to allocate to your server. The Least RAM Wanted is the least amount of RAM you want to allocate to your server. In my opinion, I suggest you to use 4GB for the most RAM wanted and 1GB for the least RAM wanted. The command for this would be: java -Xmx4G -Xms1G -jar [Name for the jar of your minecraft server] .jar nogui If it keeps crashing, keep adding more RAM but don't add more then 8GB. Hope this helps! i did it right? i made a start.bat file and wrote there "java -Xmx4G -Xms1G -jar forge-1.12.2-14.23.4.2744-universal .jar nogui"
PulseBeat_02 Posted July 30, 2018 Posted July 30, 2018 (edited) I forgot to mention that the text file can't be just named "Start.bat". You must go into the text editor, press save as, and there, you enter .bat as the file name. Windows may give you a warning, but just press ok. Once you made the bat file, the icon should look like two gears. To run your server, just click on it. It will open a command prompt, showing the server console. Keep in mind a modded server is the same as a vanilla server basically, but with mods. Search up a tutorial about making a server. The person should show you how to make the bat file. Edited July 30, 2018 by PulseBeat_02
DaemonUmbra Posted July 30, 2018 Posted July 30, 2018 (edited) 38 minutes ago, PulseBeat_02 said: the text file can't be just named "Start.bat". Where did you hear this, @PulseBeat_02? I think your issue there is Windows is set to hide known file extensions by default, so the file is actually Start.bat.txt but you only see the start.bat portion, in your file explorer window go to the view tab and check the file name extensions box. Once this has been done you can run the bat file in CMD by typing its name or by simply double clicking on it, also I highly recommend adding pause to a new line the end of your Start.bat, this will make sure the window doesn't auto-close after your server closes, making sure you don't miss any console output. Edited July 30, 2018 by DaemonUmbra This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
PulseBeat_02 Posted July 30, 2018 Posted July 30, 2018 (edited) @DaemonUmbra Sorry, I was a bit confusing. What I meant is that you must change the file extension to .bat, not the actual file name. Just as what DaemonUmbra said, the problem here is that the file is Start.bat.txt not actually Start.bat Edited July 30, 2018 by PulseBeat_02
MrPoe_ Posted November 27, 2018 Posted November 27, 2018 I did exactly as you guys have said but no matter how much RAM I use it always crashes
Cadiboo Posted November 27, 2018 Posted November 27, 2018 Make a new topic with your issue and post your logs in that new topic as described in the EAQ and my signature About Me Spoiler My Discord - Cadiboo#8887 My Website - Cadiboo.github.io My Mods - Cadiboo.github.io/projects My Tutorials - Cadiboo.github.io/tutorials Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support. When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible. Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)
MrPoe_ Posted November 28, 2018 Posted November 28, 2018 21 hours ago, Cadiboo said: Make a new topic with your issue and post your logs in that new topic as described in the EAQ and my signature Thanks for helping but I have fixed the problem now and my server is fine
OneSphere Posted July 11, 2019 Posted July 11, 2019 On 7/29/2018 at 10:10 PM, PulseBeat_02 said: I am assuming you play on Windows since you siad i7-7700k. The type of computer is not what matters, it is the RAM. Don't you have a bat file that makes you run the server? Don't always just click on jar file to start the server. If you don't have a bat file, make one. To do this go to your text editor and make a new file. Inside that new file, write "java -Xmx [Most RAM Wanted] -Xms [Least RAM Wanted] -jar [Name for the jar of your minecraft server] .jar nogui". Fill in the brackets and paste it into your text editor. (Make sure to delete quotations!) The most RAM wanted is the maximum RAM you want to allocate to your server. The Least RAM Wanted is the least amount of RAM you want to allocate to your server. In my opinion, I suggest you to use 4GB for the most RAM wanted and 1GB for the least RAM wanted. The command for this would be: java -Xmx4G -Xms1G -jar [Name for the jar of your minecraft server] .jar nogui If it keeps crashing, keep adding more RAM but don't add more then 8GB. Hope this helps! I have the same problem and i tried this and got errors Invalid maximum heap size: -Xmx4G The specified size exceeds the maximum representable size. Error: Could not create the Java Virtual Machine. Error: A fatal exception has occurred. Program will exit. Do you know what i should do about this.
DaemonUmbra Posted July 11, 2019 Posted July 11, 2019 Please don't necro old threads, if you have an issue make your own thread. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Recommended Posts