Change displayname of a mod?

Posted March 8, 20205 yr

Is there a way to change the name of mods in the mod-options GUI?

March 8, 20205 yr

Not without changing the mod

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

22 minutes ago, DaemonUmbra said:

Not without changing the mod

but what and where do i have to change a string?

March 8, 20205 yr

Is it your mod?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

2 minutes ago, DaemonUmbra said:

Is it your mod?

no but i dont wanna upload it again just want to change the name

March 8, 20205 yr

Don't edit mods that aren't yours

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

Just now, DaemonUmbra said:

Don't edit mods that aren't yours

why?

March 8, 20205 yr

Do you have permission to do so from the developer of the mod?

If not, then it's illegal

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

1 minute ago, DaemonUmbra said:

Don't edit mods that aren't yours

i just want to be another name

March 8, 20205 yr

Author

1 minute ago, DaemonUmbra said:

Do you have permission to do so from the developer of the mod?

If not, then it's illegal

but if its open source the dev allows player to edit it, not?

March 8, 20205 yr

why?

March 8, 20205 yr

That depends on the license

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

can you tell me either how it works?

March 8, 20205 yr

Author

2 minutes ago, DaemonUmbra said:

That depends on the license

because i want to get into modding too and i wanna see how everything works and i need that information

March 8, 20205 yr

Don't "get into modding" by rebranding someone else's mod!

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

Just now, DaemonUmbra said:

Don't "get into modding" by rebranding someone else's mod!

ok but can you please tell me how it works?

ill aks the dev for the lizense

Edited March 8, 20205 yr by LiquidSecret

March 8, 20205 yr

I will not help you steal mods and claim them as your own

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

Just now, DaemonUmbra said:

I will not help you steal mods and claim them as your own

Why should i steal a free mod?

March 8, 20205 yr

if i make something for free and you are going to say "look wat i made" that is not cool

March 8, 20205 yr

Are you the type of person who puts his own name on someone else's work?

That is what you appear to be asking for instructions on doing.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

Just now, loordgek said:

if i make something for free and you are going to say "look wat i made" that is not cool

why should i? and why dont you believe me?

March 8, 20205 yr

Author

1 minute ago, DaemonUmbra said:

Are you the type of person who puts his own name on someone else's work?

That is what you appear to be asking for instructions on doing.

no i an not me myself got into such a situaltion where i made a film and somone said it was his

Its an aweful feeling

March 8, 20205 yr

Then why do you need to change the text on a mod's config screen?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler

Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
Make a launcher profile targeting this version of Forge.
Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

or alternately,

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

Open a command prompt (CMD, Powershell, Terminal, etc).
Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
Run the following commands:
1. git init
2. git remote add origin [Your Repository's URL]
  - In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
3. git fetch
4. git checkout --track origin/master
5. git stage *
6. git commit -m "[Your commit message]"
7. git push
Navigate to GitHub and you should now see most of the files.
- note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

March 8, 20205 yr

Author

Just now, DaemonUmbra said:

Then why do you need to change the text on a mod's config screen?

bcuz on some servers its not allowed

i just wanna rename it to optifine

Edited March 8, 20205 yr by LiquidSecret

March 8, 20205 yr

Just now, LiquidSecret said:

bcuz on some servers its not allowed

What do you mean by "not allowed"?

Hoio

Sign In

Change displayname of a mod?

Featured Replies

Posts

java.lang.RuntimeException: null error

orbital strike cannon - mod or schematic for litematica

Minecraft launcher crashes when i try to run Minecraft Forge 1.13 - 1.19.2

Minecraft launcher crashes when i try to run Minecraft Forge 1.13 - 1.19.2

Help with Narrator mixin crashing a server

Who's Online (See full list)

Important Information

Account

Navigation

Search

Configure browser push notifications

Chrome (Android)

Chrome (Desktop)

Safari (iOS 16.4+)

Safari (macOS)

Edge (Android)

Edge (Desktop)

Firefox (Android)

Firefox (Desktop)