Jump to content
Currently supported: All versions

Anyone can port 2 mods(PAID)?

BogdanFloares

By BogdanFloares
in Minecraft General

 Share

Recommended Posts

BogdanFloares Tree Puncher

BogdanFloares

Posted
  • Author
Posted (edited)

It is redpower2. Maybe it is impossible since the last version is 1.4.7, but I guess an experimented modder can part even a mod that old

I have the deobfuscated code for redpower 2 1.4.7. 

Edited by BogdanFloares
BogdanFloares Tree Puncher

BogdanFloares

Posted
  • Author
Posted (edited)

@diesieben07 Dude tell me where eloraam registered repower to be protected by copyright! I can make an app, and just put on my website the copyright mark. That doesn't mean my app is protected by copyright law.

 

Plus, I think redpower is from 2010 or 2011. Some copyright are freed after 10 years. In 2025 you will be able to make Mickey Mouse animations. The Disney copyrights for Mickey Mouse will be freed in 2025. 

Edited by BogdanFloares
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted
3 hours ago, BogdanFloares said:

I can make an app, and just put on my website the copyright mark. That doesn't mean my app is protected by copyright law.

Pretty sure it would be protected in that case.

 

In any case, Eloraam explicitly forbids reverse engineering or reuse of RedPower's assets (the only exception being allowing the assets to be altered for resource packs), so while you could technically make a mod that mimics it, you would need to make all new textures and prove you wrote the code without reference to the mods internals.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

BogdanFloares Tree Puncher

BogdanFloares

Posted
  • Author
Posted
15 minutes ago, DaemonUmbra said:

Pretty sure it would be protected in that case.

I'm sorry. It is not enough to mark my work with copyright myself. Plus we should take in consideration where eloraam is from. The copyright law is different in each country. There are European conventions and International conventions but it depends on the state...

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Please cite your sources... I'm currently looking at the website of the US Copyright office and registration is not necessary to copyright something, unless you need to bring that copyright to court.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

BogdanFloares Tree Puncher

BogdanFloares

Posted
  • Author
Posted (edited)

For your digital work to be protected by copyright you need to actually own some documents. If you want to action someone in instance the "Copyright 2020" text from your website doesn't mean anything. Even EULA is not recognized by EU or US. If you clicked a checkbox that says "I have read the terms and conditions" and in the terms says copyrights, doesn't mean that it is actually protected. Large corps entities like Microsoft, Google, etc actually owns the copyrights and have some documents proving. But let's be honest I don't think Minecraft modders tries to get the rights for their works. They placed © All Rights Reserved just to scare people who tries to decompile it. A lot to companies just use the user's naivety to protect their work. Even Mojang had not rights on Minecraft before being acquired by Microsoft.

Edited by BogdanFloares
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Big fat [Citation Needed] here

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

Please cite your sources

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

LexManos Reality Controller

LexManos

Posted
Posted

Banned for being a fucking idiot, yes you need proof when fighting a copyright case in court. However in every country that matters the creators are assumed the creators until challenged. Which means they have default copyrights even if not registered. There is a difference between trademarks and other facets. It's not a black and white world. And indeed it would take a lot of paperwork and red tape to make your case. But that doesnt mean it doesnt exist.

 

Also, I like how you used Mickey Mouse THE REASON copyrights and trademarks dont expire in a reasonable timeframes, as your example of things expiring... You are really really misinformed.

  • Haha 1

I do Forge for free, however the servers to run it arn't free, so anything is appreciated.
Consider supporting the team on Patreon

Guest
This topic is now closed to further replies.
 Share
Go to topic listing

Announcements



  • Recently Browsing

    • No registered users viewing this page.

  • Posts

    • Azero
      Unable to build with shadow

      By Azero · Posted

      Im trying to build my mod using shade since i use the luaj library however i keep getting this error Reason: Task ':reobfJar' uses this output of task ':shadowJar' without declaring an explicit or implicit dependency. This can lead to incorrect results being produced, depending on what order the tasks are executed. So i try adding reobfJar.dependsOn shadowJar  Could not get unknown property 'reobfJar' for object of type org.gradle.api.internal.artifacts.dsl.dependencies.DefaultDependencyHandler. my gradle file plugins { id 'eclipse' id 'idea' id 'maven-publish' id 'net.minecraftforge.gradle' version '[6.0,6.2)' id 'com.github.johnrengelman.shadow' version '7.1.2' id 'org.spongepowered.mixin' version '0.7.+' } apply plugin: 'net.minecraftforge.gradle' apply plugin: 'org.spongepowered.mixin' apply plugin: 'com.github.johnrengelman.shadow' version = mod_version group = mod_group_id base { archivesName = mod_id } // Mojang ships Java 17 to end users in 1.18+, so your mod should target Java 17. java.toolchain.languageVersion = JavaLanguageVersion.of(17) //jarJar.enable() println "Java: ${System.getProperty 'java.version'}, JVM: ${System.getProperty 'java.vm.version'} (${System.getProperty 'java.vendor'}), Arch: ${System.getProperty 'os.arch'}" minecraft { mappings channel: mapping_channel, version: mapping_version copyIdeResources = true runs { configureEach { workingDirectory project.file('run') property 'forge.logging.markers', 'REGISTRIES' property 'forge.logging.console.level', 'debug' arg "-mixin.config=derp.mixin.json" mods { "${mod_id}" { source sourceSets.main } } } client { // Comma-separated list of namespaces to load gametests from. Empty = all namespaces. property 'forge.enabledGameTestNamespaces', mod_id } server { property 'forge.enabledGameTestNamespaces', mod_id args '--nogui' } gameTestServer { property 'forge.enabledGameTestNamespaces', mod_id } data { workingDirectory project.file('run-data') args '--mod', mod_id, '--all', '--output', file('src/generated/resources/'), '--existing', file('src/main/resources/') } } } sourceSets.main.resources { srcDir 'src/generated/resources' } repositories { flatDir { dirs './libs' } maven { url = "https://jitpack.io" } } configurations { shade implementation.extendsFrom shade } dependencies { minecraft "net.minecraftforge:forge:${minecraft_version}-${forge_version}" implementation 'org.luaj:luaj-jse-3.0.2' implementation fg.deobf("com.github.Virtuoel:Pehkui:${pehkui_version}") annotationProcessor 'org.spongepowered:mixin:0.8.5:processor' minecraftLibrary 'luaj:luaj-jse:3.0.2' shade 'luaj:luaj-jse:3.0.2' } // Example for how to get properties into the manifest for reading at runtime. tasks.named('jar', Jar).configure { manifest { attributes([ 'Specification-Title' : mod_id, 'Specification-Vendor' : mod_authors, 'Specification-Version' : '1', // We are version 1 of ourselves 'Implementation-Title' : project.name, 'Implementation-Version' : project.jar.archiveVersion, 'Implementation-Vendor' : mod_authors, 'Implementation-Timestamp': new Date().format("yyyy-MM-dd'T'HH:mm:ssZ"), "TweakClass" : "org.spongepowered.asm.launch.MixinTweaker", "TweakOrder" : 0, "MixinConfigs" : "derp.mixin.json" ]) } rename 'mixin.refmap.json', 'derp.mixin-refmap.json' } shadowJar { archiveClassifier = '' configurations = [project.configurations.shade] finalizedBy 'reobfShadowJar' } assemble.dependsOn shadowJar reobf { re shadowJar {} } publishing { publications { mavenJava(MavenPublication) { artifact jar } } repositories { maven { url "file://${project.projectDir}/mcmodsrepo" } } }  
    • LIMadrim15
      Dragons

      By LIMadrim15 · Posted

    • G0HAN A LENDA
      Black Screen minecraft forge, help

      By G0HAN A LENDA · Posted

      All versions of Minecraft Forge suddenly black screen even without mods (tried reinstalling original Minecraft, Java, updating drivers doesn't work)
    • TileEntity
      Minecraft crash when i open indentity menu

      By TileEntity · Posted

      identity is conflicting with scguns
    • Bugplayer
      Minecraft crash when i open indentity menu

      By Bugplayer · Posted

      When i join minecraft all ok, when i join world all working fine, but when i open indentity menu, i get this The game crashed whilst unexpected error Error: java.lang.NullPointerException: Cannot invoke "top.ribs.scguns.common.Gun$Projectile.getDamage()" because "this.projectile" is null crash report here https://paste.ee/p/0vKaf

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept