Posted September 4, 20187 yr Hello I have a problem, I managed to combine discord RPC with my mod, but when I run the discord code RPC I get this error: "The specified module could not be found"
September 4, 20187 yr 1 minute ago, ElOsito123 said: "The specified module could not be found" This is equivalent to telling a doctor "It hurts." VANILLA MINECRAFT CLASSES ARE THE BEST RESOURCES WHEN MODDING I will be posting 1.15.2 modding tutorials on this channel. If you want to be notified of it do the normal YouTube stuff like subscribing, ect. Forge and vanilla BlockState generator.
September 4, 20187 yr You could post your code as a GitHub repo. You could also include a debug.log if there is one. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 4, 20187 yr 1 minute ago, ElOsito123 said: So what could I do? Show us your code and the whole error report. VANILLA MINECRAFT CLASSES ARE THE BEST RESOURCES WHEN MODDING I will be posting 1.15.2 modding tutorials on this channel. If you want to be notified of it do the normal YouTube stuff like subscribing, ect. Forge and vanilla BlockState generator.
September 4, 20187 yr Author The error simply appears as: "The specified module could not be found" and the game closes, my discord code does not think it's the problem because it works in normal java, it's this: https://pastebin.com/itAsYHu8
September 4, 20187 yr Author I found the complete error: ---- Minecraft Crash Report ---- WARNING: coremods are present: ItemPatchingLoader (ItemPhysic Lite 1.3 mc1.13.jar) Main (OldAnimationsMod v2.4 FORGE MC1.13.jar) Contact their authors BEFORE contacting forge // But it works on my machine. Time: 3/09/18 11:11 PM Description: There was a severe problem during mod loading that has caused the game to fail net.minecraftforge.fml.common.LoaderException: java.lang.UnsatisfiedLinkError: Unable to load library 'discord-rpc': No se puede encontrar el módulo especificado. at net.minecraftforge.fml.common.LoadController.transition(LoadController.java:162) at net.minecraftforge.fml.common.Loader.initializeMods(Loader.java:739) at net.minecraftforge.fml.client.FMLClientHandler.finishMinecraftLoading(FMLClientHandler.java:310) at net.minecraft.client.Minecraft.func_71384_a(Minecraft.java:495) at net.minecraft.client.Minecraft.func_99999_d(Minecraft.java:329) at net.minecraft.client.main.Main.main(SourceFile:124) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:497) at net.minecraft.launchwrapper.Launch.launch(Launch.java:135) at net.minecraft.launchwrapper.Launch.main(Launch.java:28) Caused by: java.lang.UnsatisfiedLinkError: Unable to load library 'discord-rpc': No se puede encontrar el módulo especificado. at com.sun.jna.NativeLibrary.loadLibrary(NativeLibrary.java:169) at com.sun.jna.NativeLibrary.getInstance(NativeLibrary.java:242) at com.sun.jna.Library$Handler.<init>(Library.java:140) at com.sun.jna.Native.loadLibrary(Native.java:368) at com.sun.jna.Native.loadLibrary(Native.java:353) at club.minnced.discord.rpc.DiscordRPC.<clinit>(DiscordRPC.java:42) at me.SrPandaStick.Discord.RichPresence.star(RichPresence.java:20) at me.SrPandaStick.Discord.Main.init(Main.java:32) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:497) at net.minecraftforge.fml.common.FMLModContainer.handleModStateEvent(FMLModContainer.java:560) at sun.reflect.GeneratedMethodAccessor16.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:497) at com.google.common.eventbus.EventSubscriber.handleEvent(EventSubscriber.java:74) at com.google.common.eventbus.SynchronizedEventSubscriber.handleEvent(SynchronizedEventSubscriber.java:47) at com.google.common.eventbus.EventBus.dispatch(EventBus.java:322) at com.google.common.eventbus.EventBus.dispatchQueuedEvents(EventBus.java:304) at com.google.common.eventbus.EventBus.post(EventBus.java:275) at net.minecraftforge.fml.common.LoadController.sendEventToModContainer(LoadController.java:211) at net.minecraftforge.fml.common.LoadController.propogateStateMessage(LoadController.java:189) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:497) at com.google.common.eventbus.EventSubscriber.handleEvent(EventSubscriber.java:74) at com.google.common.eventbus.SynchronizedEventSubscriber.handleEvent(SynchronizedEventSubscriber.java:47) at com.google.common.eventbus.EventBus.dispatch(EventBus.java:322) at com.google.common.eventbus.EventBus.dispatchQueuedEvents(EventBus.java:304) at com.google.common.eventbus.EventBus.post(EventBus.java:275) at net.minecraftforge.fml.common.LoadController.distributeStateMessage(LoadController.java:118) at net.minecraftforge.fml.common.Loader.initializeMods(Loader.java:737) ... 10 more A detailed walkthrough of the error, its code path and all known details is as follows: --------------------------------------------------------------------------------------- -- System Details -- Details: Minecraft Version: 1.13 Operating System: Windows 10 (amd64) version 10.0 CPU: 4x Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz Java Version: 1.8.0_51, Oracle Corporation Java VM Version: Java HotSpot(TM) 64-Bit Server VM (mixed mode), Oracle Corporation Memory: 337752336 bytes (322 MB) / 603979776 bytes (576 MB) up to 1073741824 bytes (1024 MB) JVM Flags: 8 total; -XX:HeapDumpPath=MojangTricksIntelDriversForPerformance_javaw.exe_minecraft.exe.heapdump -Xmx1G -XX:+UnlockExperimentalVMOptions -XX:+UseG1GC -XX:G1NewSizePercent=20 -XX:G1ReservePercent=20 -XX:MaxGCPauseMillis=50 -XX:G1HeapRegionSize=16M IntCache: cache: 0, tcache: 0, allocated: 0, tallocated: 0 FML: MCP 9.19 Powered by Forge 11.15.1.1722 Optifine OptiFine_1.8.9_HD_U_H7 10 mods loaded, 10 mods active States: 'U' = Unloaded 'L' = Loaded 'C' = Constructed 'H' = Pre-initialized 'I' = Initialized 'J' = Post-initialized 'A' = Available 'D' = Disabled 'E' = Errored UCHI mcp{9.19} [Minecraft Coder Pack] (minecraft.jar) UCHI FML{8.0.99.99} [Forge Mod Loader] (forge-1.8.9-11.15.1.1722.jar) UCHI Forge{11.15.1.1722} [Minecraft Forge] (forge-1.8.9-11.15.1.1722.jar) UCHI itemphysic{1.3.0} [ItemPhysic] (minecraft.jar) UCHI oldanimations{2.4} [OldAnimationsMod] (minecraft.jar) UCHI blockoverlay{1.2} [BlockOverlay] ([1.8.9] BlockOverlay - 2.0.jar) UCHI wingsmod{1.2} [Wings Mod] ([1.8.9] Wings Mod-1.2.jar) UCHI Sk1er-Tayber50k{2.3} [Chroma HUD] (ChromaHUD-2.3.jar) UCHI keystrokesmod{4.1} [KeystrokesMod] (KeystrokesMod-4.1 [1.8.9].jar) UCHE DiscordRichPresence{1.0} [DiscordRichPresence] (modid-1.0-all.jar) Loaded coremods (and transformers): ItemPatchingLoader (ItemPhysic Lite 1.3 mc1.13.jar) com.creativemd.itemphysic.ItemTransformer Main (OldAnimationsMod v2.4 FORGE MC1.13.jar) com.spiderfrog.main.ClassTransformer GL info: ' Vendor: 'Intel' Version: '3.1.0 - Build 9.17.10.4459' Renderer: 'Intel(R) HD Graphics 3000' Edited September 4, 20187 yr by ElOsito123
September 4, 20187 yr 12 minutes ago, ElOsito123 said: Minecraft Version: 1.13 There is no forge version for 1.13 12 minutes ago, ElOsito123 said: UCHI Forge{11.15.1.1722} [Minecraft Forge] (forge-1.8.9-11.15.1.1722.jar) This even says its for 1.8.9 VANILLA MINECRAFT CLASSES ARE THE BEST RESOURCES WHEN MODDING I will be posting 1.15.2 modding tutorials on this channel. If you want to be notified of it do the normal YouTube stuff like subscribing, ect. Forge and vanilla BlockState generator.
September 4, 20187 yr Author I know, I use it in 1.8.9, but change that because they do not want to help ...
September 4, 20187 yr Oh yeah, just lie about what version you're using. That'll make everything better. Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable. If you think this is the case, JUST REPORT ME. Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice. Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked. DO NOT PM ME WITH PROBLEMS. No help will be given.
September 5, 20187 yr 1 hour ago, ElOsito123 said: Then could someone help me please? Update to a modern version About Me Spoiler My Discord - Cadiboo#8887 My Website - Cadiboo.github.io My Mods - Cadiboo.github.io/projects My Tutorials - Cadiboo.github.io/tutorials Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support. When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible. Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)
September 5, 20187 yr Author Please, I'm not asking for help with anything related to the version, they really insist on that but what I'm asking has nothing to do with the minecraft version. I do not ask for help with code only with that error that I do not know.
September 5, 20187 yr 23 hours ago, ElOsito123 said: WARNING: coremods are present: ItemPatchingLoader (ItemPhysic Lite 1.3 mc1.13.jar) Main (OldAnimationsMod v2.4 FORGE MC1.13.jar) Contact their authors BEFORE contacting forge 23 hours ago, Animefan8888 said: There is no forge version for 1.13 This even says its for 1.8.9 23 hours ago, ElOsito123 said: net.minecraftforge.fml.common.LoaderException: java.lang.UnsatisfiedLinkError: Unable to load library 'discord-rpc': No se puede encontrar el módulo especificado. Those are things to look into that might be the error About Me Spoiler My Discord - Cadiboo#8887 My Website - Cadiboo.github.io My Mods - Cadiboo.github.io/projects My Tutorials - Cadiboo.github.io/tutorials Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support. When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible. Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)
September 5, 20187 yr Author Thank you very much, I will investigate and do some tests to see what could be
September 5, 20187 yr Author I researched a little more and what I discovered is that in the reported cases it only happens in MacOs, but I use windows, besides that they have not found a solution, it does not have to do with another mod, I use it only and it does not work, either It's the version.
September 5, 20187 yr Is your source code posted somewhere? I have a hunch what your problem might be but I want to make sure. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 5, 20187 yr Author 7 hours ago, DaemonUmbra said: Is your source code posted somewhere? I have a hunch what your problem might be but I want to make sure. Main class: https://pastebin.com/KSdB8aTK DiscordRPC class: https://pastebin.com/LyJfxQXs
September 5, 20187 yr I need to see everything in your project. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 5, 20187 yr Author Can not specify well what files?, to do the same thing to put them in pastebin forget it, I'll put it on github Edited September 5, 20187 yr by ElOsito123
September 5, 20187 yr Author This is the project, I do not know if it went up well is the first time I use githubhttps://github.com/SrPandaStick/DiscordRPC
September 6, 20187 yr Author 10 hours ago, DaemonUmbra said: I need to see everything in your project. Does anyone have any idea what the problem should be?
September 6, 20187 yr Yeah, you're not using Shadow correctly. Update to 1.12 and use Forge's Jar-in-Jar system, it's much easier. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
September 6, 20187 yr Author 35 minutes ago, DaemonUmbra said: Yeah, you're not using Shadow correctly. Update to 1.12 and use Forge's Jar-in-Jar system, it's much easier. Can you explain me how to use it or an example? English is not my native language so it's hard to understand
September 6, 20187 yr Have you looked at the documentation I linked? This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.