[How-To]Build multiple separate projects with Gradle

[GotoLink]

This post is meant to help those not accustomed to building with Gradle, but wanting to use separate directories for making mods. (I think some people name it "Pahimar setup" or something...)

As each setup can be different, I will take mine as a reference (the "Goto setup" ), and explain it as simply as possible.

 

Before beginning

This tutorial is meant to be IDE independent, and as such, use "conventional" naming of things and doesn't describe IDE settings step. Those you should know how to do, since you are supposed to choose your IDE while learning to code.

 

For example, a "Project" is a group of resources, eventually with dependencies, that can be run. Eclipse uses this term, while IntellijIdea uses "Module". Not to be confused with IntellijIdea "Project" (which can be a group of projects) nor Gradle "Project", which are things that can be "built" through Gradle.

 

I personally go with one "Project" = one mod = one Gradle "Project". (because Forge recommended it this way, and it makes sense too)

 

The "dependency" setup

This setup is based on dependencies, so build files are simplified and easier to change.

 

My directories are as follows:

-Forge (the folder inside which forge source has been extracted, per the main tutorial)

\build.gradle

\settings.gradle

-Project1 (another folder, which contains the mod1)

\build.gradle

-Project2 (another folder, which contains the mod2)

etc.

 

Note the new file, settings.gradle, which only contain:

includeFlat 'Project1','Project2'

This basically specify that "Project1" and "Project2" folders depend on the Forge folder. For example you code a main core API in the Forge source, and dependent mods in the other folders. You can add more to the list.

Specific subfolders can be added with line such as 'Project/subfolder'.

You can make it a bit more intelligent with code for folder look-up, but this is outside of my post scope.

 

build.gradle in Forge folder is a modified version of the file shipped with Forge sources:

[spoiler=For 1.6.4]

buildscript {
    repositories {
        mavenCentral()
        maven {
            name = "forge"
            url = "http://files.minecraftforge.net/maven"
        }
    }
    dependencies {
        classpath 'net.minecraftforge.gradle:ForgeGradle:1.0-SNAPSHOT'
    }
}
allprojects {
    apply plugin: 'forge'
    minecraft{version = "1.6.4-9.11.1.964"}
    version = "1.0"
    archivesBaseName = project.projectDir.name
}

 

 

[spoiler=For 1.7.2]

buildscript {
    repositories {
        mavenCentral()
        maven {
            name = "forge"
            url = "http://files.minecraftforge.net/maven"
        }maven {
            name = "sonatype"
            url = "https://oss.sonatype.org/content/repositories/snapshots/"
        }
    }
    dependencies {
        classpath 'net.minecraftforge.gradle:ForgeGradle:1.1-SNAPSHOT'
    }
}
allprojects {
    apply plugin: 'forge'
    minecraft{version = "1.7.2-10.12.0.985"}
    version = "1.0"
    archivesBaseName = project.projectDir.name
}

 

 

It adds a body to "allprojects" with basic settings, such as applying forge, settings minecraft version and a general name for the mod jar. (

archivesBaseName

) This body applies parameters to all projects, including the Forge one.

Use "subprojects" to work on all projects except the Forge one.

 

Let see how it simplify the mod build.gradle, for example the Project1/build.gradle:

version = "1.1"
sourceSets.main{
    java{
srcDirs project.projectDir.getPath() exclude ("bin/**", "build*")
}
    resources{
srcDirs project.projectDir.getPath() exclude ("bin/**", "build*")
}
}
processResources {
    // replace stuff in mcmod.info, nothing else
    from(sourceSets.main.resources.srcDirs) {
        include 'mcmod.info'
    // replace $version and $mcversion
        expand 'version':project.version, 'mcversion':project.minecraft.version
    }

    // copy everything else, thats not the mcmod.info
    from(sourceSets.main.resources.srcDirs) {
        exclude 'mcmod.info'
    }
}

The first body is made to set the mod source differently. With this, the "Project1" folder contains directly the source package, without "src/main/" intermediate folders, and making sure all superfluous files are excluded (here, a "bin" folder, and any file or folder whose name begin with "build").

Project1
\assets\modid1\textures\...
\mods\modid1\...

Of course, this entire file is optional and highly dependent on your own setup.

Note that

project.projectDir

reference the folder as File, for easy copy-pasting in another mod folder.

 

Now we can test the build with

gradlew build

by command line in Forge folder.

 

Or with the Gradle plugin in Eclipse, open the gradle view and launch the "build" task for the Forge imported Gradle project.

 

You should now have a simple jar into each Project/build/libs

 

 

The "Independent" setup

Again, you have multiple mods in separate folders, but don't want to use the Forge folder, nor do you want to build all mods at the same time.

Indeed, you don't need to.

Per the main tutorial, you made a Forge project, ran with either

gradlew setupDevWorkspace

or

gradlew setupDecompWorkspace

ForgeGradle and its dependencies should now be cached.

 

Copy over the build.gradle file from the Forge folder in all your mods roots. (plus the gradle folder and gradlew files if you don't want to install Gradle)

You can now delete the Forge project folder.

 

With this project structure:

Project2
\resources\assets\modid\textures\...
\src\mods\modid\...
\build.gradle

 

A valid build.gradle file is:

[spoiler=For 1.6.4]

buildscript {
    repositories {
        mavenCentral()
        maven {
            name = "forge"
            url = "http://files.minecraftforge.net/maven"
        }
    }
    dependencies {
        classpath 'net.minecraftforge.gradle:ForgeGradle:1.0-SNAPSHOT'
    }
}
apply plugin: 'forge'
minecraft{version = "1.6.4-9.11.1.964"}
version = "1.0"//Set the mod version, is appended to the end of the jar name
archivesBaseName = project.projectDir.name// Set the jar name as the project root folder name
//Optional: change the project structure
sourceSets.main{
    java{
srcDirs 'src'//set the source folder as the /src subfolder
}
    resources{
srcDirs 'resources'//set the resources folder as the /resources subfolder
}
}
processResources {
    // replace stuff in mcmod.info, nothing else
    from(sourceSets.main.resources.srcDirs) {
        include 'mcmod.info'
        // replace $version and $mcversion
        expand 'version':project.version, 'mcversion':project.minecraft.version
    }

    // copy everything else, thats not the mcmod.info
    from(sourceSets.main.resources.srcDirs) {
        exclude 'mcmod.info'
    }
}

 

 

[spoiler=For 1.7.2]

buildscript {
    repositories {
        mavenCentral()
        maven {
            name = "forge"
            url = "http://files.minecraftforge.net/maven"
        }maven {
            name = "sonatype"
            url = "https://oss.sonatype.org/content/repositories/snapshots/"
        }
    }
    dependencies {
        classpath 'net.minecraftforge.gradle:ForgeGradle:1.1-SNAPSHOT'
    }
}
apply plugin: 'forge'
minecraft{version = "1.7.2-10.12.0.985"}
version = "1.0"//Set the mod version, is appended to the end of the jar name
archivesBaseName = project.projectDir.name// Set the jar name as the project root folder name
//Optional: change the project structure
sourceSets.main{
    java{
srcDirs 'src'//set the source folder as the /src subfolder
}
    resources{
srcDirs 'resources'//set the resources folder as the /resources subfolder
}
}
processResources {
    // replace stuff in mcmod.info, nothing else
    from(sourceSets.main.resources.srcDirs) {
        include 'mcmod.info'
    // replace $version and $mcversion
        expand 'version':project.version, 'mcversion':project.minecraft.version
    }

    // copy everything else, thats not the mcmod.info
    from(sourceSets.main.resources.srcDirs) {
        exclude 'mcmod.info'
    }
}

 

 

 

You can now import the mod project in your favourite IDE , with the build.gradle file.

 

You can also run

gradlew build

by command line in a project folder, to get the corresponding mod jar in its build/libs subfolder.

[xalcon]

Thanks for your guide. I begin to understand what gradle is being used for (or atleast whats the intention )

 

People call this setup "Pahimar-Setup", because Pahimar (Youtube Channel) introduced some tutorials on how to setup eclipse to include each mod as a separate project.

 

Now I'm looking for on how to teach IntelliJ to load my sub-modules as separate mods.

[GotoLink]

Yeah, this is the nice part of Gradle for us modders, looks at lot better than Ant script IMO

And don't forget the automated forge updates.

 

Ok, fixed Pahimar name

 

I think IntelliJ can import Gradle projects if you point it the build.gradle file.

You might have to change the run configuration on your own though.

[Alex_hawks]

just wondering, are the Project1 and Project 2 folders in the Forge folder, or the folder that the Forge folder is in?

[GotoLink]

Use

include

to work with Projects folder inside the Forge one. (hierarchical type)

includeFlat

works for folder on the same level. (flat type, ie. Forge and Project1 have the same root folder)

[Alex_hawks]

Thank you for that clarification. Is there any way to include the Project1 and Project2 outlined in the code block?

Development
    Forge
        the stuff normally in the forge dir
    src
        Project1
            Project1 Stuff
        Project2
            Project2 Stuff

[GotoLink]

That should do it:

includeFlat 'src/Project1', 'src/Project2'

[larsgerrits]

Aboout this piece of code:

sourceSets.main{
    java{
srcDirs project.projectDir.getPath() exclude ("bin/", "build*")
}
    resources{
srcDirs project.projectDir.getPath() exclude ("bin/", "build*")
}
}
version = "1.1"

is that code in the build.gradle in the forge folder, or is is it the build.gradle in the "Project1" folder?

[GotoLink]

That is the whole content of the build.gradle file in Project1 folder.

[larsgerrits]

Could you please update the main post so it fits the 1.7 upgrade because a lot of stuff changed in 1.7 so there's a new gradle version?

[luacs1998]

You're just using the Gradle API, no need to update.

[GotoLink]

Added another type of setup, with more comments in build.gradle

[tenowg]

I have to admit that I could only get this to work once... there is something I am missing.

 

I have added the allprojects section to build.gradle (as listed in the OP), and I can successfully build the project with no errors, but this is only as long as there is no settings.gradle file with includeFlat 'someproject' (as in it only builds the main project)

 

as soon as i try to add a project to settings.gradle I get this error:

 

* Where:
Build file 'C:\Users\tenowg\Desktop\Forge\EclipseTest\build.gradle' line: 19

* What went wrong:
A problem occurred evaluating root project 'EclipseTest'.
> java.lang.NullPointerException (no error message)

 

EclipseTest is the main test project, I have tried the following:

 

• Creating a full project as the subproject (and rewriting the build.gradle for the subproject)
  
• Creating a empty project with just the build.gradle (and without)
  
• Letting it create the folders
  
• beating my head on the keyboard
  

 

This is under 1.7.2.... using all builds I could find.

 

I have tried all this in IntelliJ and Eclipse

 

The error line is always on the "apply plugin: forge" in build.gradle of the main project.

 

Maybe a complete "noob" step by step version?

 

Thanks again, and I do know this works, as it has worked once, but I can't seem to replicate it...

 

 

[larsgerrits]

At the independent setup, you said that you need to setup your forge folder with either "gradlew setupDecompWorkspace" or "gradlew setupDevWorkspace". Do you also need to run "gradlew eclipse" to make it work, cause i did everything you said in the post, but if i import a existing project into workspace, it can't find my project.

 

PS: i didn't use the gradle plugin for eclipse because it seems like i don't have the eclipse marketplace...

[GotoLink]

  On 1/4/2014 at 6:30 AM, tenowg said:

I have to admit that I could only get this to work once... there is something I am missing.

 

I have added the allprojects section to build.gradle (as listed in the OP), and I can successfully build the project with no errors, but this is only as long as there is no settings.gradle file with includeFlat 'someproject' (as in it only builds the main project)

So your setup should be like:

Forge
\EclipseTest
->build.gradle
->settings.gradle
\someproject
->build.gradle (optional)

 

Make sure the 'allprojects" body is between the "buildscript" and the "processResources" bodies.

Try to

gradlew clean cleanEclipse cleanIdea

once before next attemp. Old build attempts could screw things.

 

You can have a try with the "Independent" setup.

I'd recommend using Eclipse with Gradle plugin to import as a Gradle Project.

Then run

gradlew clean setupDecompWorkspace eclipse

It is less clumsy that IntelliJ, IMHO.

 

@larsgerrits

Running the Forge gradlew things is only needed once, to cache the libraries. The "eclipse" task is not needed here, AFAIK, because you are not using the Forge folder to import into Eclipse.

The "independent" setup only needs a valid build.gradle file inside your project (not forge, the mod one).

Then, either import your project (not forge, the mod one) with the Gradle plugin, or, run

gradlew clean setupDecompWorkspace eclipse

at your project, then import it.

[dev909]

Thanks, this really helps me understand gradle abit. I'm trying to set it up so that my separate mods are source folders, and to build them separately. To test I copied the example mod and source folder and changed the names over to "test" (instead of example). I used the 1.7.4 build.gradle code from the Independent Setup, and changed the srcDirs to 'src/test'. When I build and copy the jar to minecraft, under the mods menu I get both the original example mod and my copied test mod. How can I set it up so that it excludes any other source folders in eclipse and builds a specific mod? It would be easier than moving the mods source folder out of the full directory itself, build, then replace the source folder again. Would be very tedious with more than one mod.

 

Heres a screenshot if I don't make sense (really tired while writing this):

 

http://s28.postimg.org/tc4c6a5jx/forge_help.png

 

Red and Green are separate mods and the Blue is what I changed in build.gradle

[GotoLink]

@dev909

You didn't follow my instructions for the "Independent setup" here.

I see two mods in the same project folder, and the forge license, readme files...bad boy

 

The problem you might not see, is that Gradle sets by default a test folder as src/test/java and src/test/resources, but this is for testing purposes and not supposed to be built with the 'main' sources. This probably conflicts with what you set into the build.gradle file.

 

If you don't want to move out of the Forge folder, at least make a build.gradle file per mod. That is the easiest way to go.

In your situation, put them into the "main" and "test" subfolders with:

sourceSets.main{
    java{
srcDirs 'java'
}
    resources{
srcDirs 'resources'
}
}

[Alexiy]

This looks complicated at a first glance. So now we have to learn Groovy if we want to understand what gradle does and how to configure it? And where I can see what all those tasks do exactly (source)?

[GotoLink]

I don't think the "Independent" setup requires any groovy knowledge.

That is the default setup that forge invites you to use.

Obviously, the further you go from the default, the more you'll need to understand and change.

 

I only needed to refer to the gradle docs to make this tutorial.

[larsgerrits]

I get an error when importing a gradle project with the independent setup:

 

  Reveal hidden contents

 

 

 

This is my build.gradle:

 

  Reveal hidden contents

 

buildscript {
    repositories {
        mavenCentral()
        maven {
            name = "forge"
            url = "http://files.minecraftforge.net/maven"
        }maven {
            name = "sonatype"
            url = "https://oss.sonatype.org/content/repositories/snapshots/"
        }
    }
    dependencies {
        classpath 'net.minecraftforge.gradle:ForgeGradle:1.2-SNAPSHOT'
    }
}
apply plugin: 'forge'
minecraft{version = "1.7.2-10.12.0.1056"}
version = "1.7.2-v0.01"
archivesBaseName = project.projectDir.name
sourceSets.main{
    java{
srcDirs 'src'
}
    resources{
srcDirs 'resources'
}
}
processResources {
    from(sourceSets.main.resources.srcDirs) {
        include 'mcmod.info'
        expand 'version':project.version, 'mcversion':project.minecraft.version
    }
    from(sourceSets.main.resources.srcDirs) {
        exclude 'mcmod.info'
    }
}

 

 

[GotoLink]

Eclipse tells you to "Build Model" before.

I'd advise you to tick the "Run before" box, and add "setupDevWorkspace" to the command, between "cleanEclipse" and "eclipse".

[larsgerrits]

I ticked the "Run before" box, and changed that line next to it to "cleanEclipse setupDevWorkspace eclipse", but i got the same error.

[larsgerrits]

I searched over the internet, but i couldn't find a solution. Can you help me with this or are you out of ideas too?

[SirNiloc]

Mine won't build.

 

* What went wrong:

A problem occurred evaluating project ':Project1'.

> Could not find method processResources() for arguments [build_60m7ce4rho9j76mu

eei15hel03$_run_closure2@1698f66] on project ':Project1'.

[Draco18s]

Having built a chunk of related but separate mods, I was keeping all the files in the same /src/main directory mostly because of not knowing what else to do, but given that I'd like to build them as separate jar files, I ended up here.

 

Good news: I got it to compile.

Bad news: it shoved them all into one jar anyway (which has a clever file name of "Forge 1180.jar")

 

Umm...what didn't I do correctly?

 

Unrelated, I should update Forge at some point, heh.