Posted February 28, 20196 yr I have my mod I'm working on but I'm going traveling and want to keep working on it. However I do not want to do the setup process on my laptop, is there something I can do to just put the files on my laptop(through GitHub) and then be able to work on my mod while being able to test it? btw I'm on 1.12.2 and the main part I want to skip is installing forge and the command terminal Edited February 28, 20196 yr by Blue_Atlas
February 28, 20196 yr No, just run the setup. The files that the process makes/edits are illegal to redistribute {they are owned by Mojang} so there is no legitimate way to transfer them anywhere else. There is a reason why we go through the complicated setup. I do Forge for free, however the servers to run it arn't free, so anything is appreciated. Consider supporting the team on Patreon
February 28, 20196 yr Yes. Make a batch file. Stop complaining about it. Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable. If you think this is the case, JUST REPORT ME. Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice. Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked. DO NOT PM ME WITH PROBLEMS. No help will be given.
February 28, 20196 yr Author alright, let me rephrase my question now that I know more, if I copy my whole directory via GitHub what do I need to do to set up a new one on a different computer without any part installed to begin with? Edited February 28, 20196 yr by Blue_Atlas
February 28, 20196 yr If you put your mod source on GitHub using the gitignore supplied in the MDK the only requirement on the other side is a JDK and some time for the sources to be re-generated, and your IDE of choice, obviously. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
February 28, 20196 yr Author I'm sorry but I am still confused. What steps of setup do I need to do on my laptop if I already have eclipse installed but don't have anything else there that I need before I can copy my directory over and have it run properly?
February 28, 20196 yr 2 hours ago, Blue_Atlas said: I'm sorry but I am still confused. What steps of setup do I need to do on my laptop if I already have eclipse installed but don't have anything else there that I need before I can copy my directory over and have it run properly? 1. Transfer the work dir to your laptop. 2. add apply plugin: 'eclipse' to your build.gradle file just below apply plugin: 'net.minecraftforge.gradle.forge'(note 1.12.2 only) 2. on the laptop you need to rebuild the eclipes paths. gradlew cleanEclipse and then gradlew eclipse 3.Make the gradlew genEclipseRuns you may need to delete the old server and client.launch before ruining this. (note this only works on the 1.13.2 if your on 1.12.2 you need to use gradlew runClient command to start your game ) this will let your laptop skip the heavy lifting of the build. Edited February 28, 20196 yr by JavaMan7 Deleating .gitignore is not the best thing to do. And you should not use github like dropbox
February 28, 20196 yr 24 minutes ago, JavaMan7 said: delete .gitigore Don't do this. What exactly are you trying to skip here? Do you want to skip the decomp and deobf time or are you going somewhere without internet? The Forge MDK uses a Gradle wrapper (Batch and Shell scripts combined with a Jar file, allowing Gradle to bootstrap itself on any system with a JDK installed). As long as you have a JDK installed that the included Gradle Wrapper can use (along with an internet connection to allow Forge to fetch all the dependencies), you'll be fine. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
March 1, 20196 yr Author I don't have command terminal access as far as I know and getting the setup files on my laptop is tricky, so I'm trying not to use the terminal and only put files on through GitHub if possible. Edited March 1, 20196 yr by Blue_Atlas
March 1, 20196 yr Why would you not have access to cmd or terminal on your machine? This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
March 1, 20196 yr It seems a bit sketchy, is the laptop yours, borrowed, or does it have parental controls or some such turned on? This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
March 1, 20196 yr The code on GitHub is only your mod’s code. None of the required libraries or the prerequisites for launching minecraft + the mod are on the mod’s GitHub. The gradle tasks downloads and sets up the environment for you to make the mod. IntelliJ has an integrated terminal, you could run the setup tasks from a script or you could theoretically do the entire setup from single user mode. The setup tasks are necessary to develop a mod. Edited March 1, 20196 yr by Cadiboo Setups -> sets up About Me Spoiler My Discord - Cadiboo#8887 My Website - Cadiboo.github.io My Mods - Cadiboo.github.io/projects My Tutorials - Cadiboo.github.io/tutorials Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support. When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible. Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)
March 1, 20196 yr Author as far as I know I can access the terminal but it may be on some form of restrictions, so if I can get a working workspace without having to use the terminal it would be nice
March 1, 20196 yr AFAIK you need access to the command line in order to setup, test, git commit, and build your mod. You really should find a way to gain access to the command line, or developing mod would be very (and unnecessarily) difficult. Some tips: Spoiler Modder Support: Spoiler 1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code. 2. Always post your code. 3. Never copy and paste code. You won't learn anything from doing that. 4. Quote Programming via Eclipse's hotfixes will get you nowhere 5. Learn to use your IDE, especially the debugger. 6. Quote The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it. Support & Bug Reports: Spoiler 1. Read the EAQ before asking for help. Remember to provide the appropriate log(s). 2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.
March 1, 20196 yr Author would it work if I just loaded my current directory onto a flash drive and then pointed eclipse to the workspace on my laptop?
March 1, 20196 yr 12 hours ago, Blue_Atlas said: does it matter why I might not have access to the command terminal? Batch files. Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable. If you think this is the case, JUST REPORT ME. Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice. Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked. DO NOT PM ME WITH PROBLEMS. No help will be given.
March 2, 20196 yr Author Just tried setting it up on laptop and it isn't working, do I have to do a different process to setup on a macbook than I have to on windows?
March 2, 20196 yr Author when I run gradlew setupDecompWorkspace it tells me -bash: gradlew: command not found Edited March 2, 20196 yr by Blue_Atlas
March 2, 20196 yr Your command prompt/terminal's working directory needs to be the root directory of your mod source(i.e. where gradlew and gradlew.bat are) for that to work. This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
March 2, 20196 yr Windows, Mac, or Linux? This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy. As the most common issue I feel I should put this outside the main bulk: The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge. If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan. For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety. Spoiler Logs (Most issues require logs to diagnose): Spoiler Please post logs using one of the following sites (Thank you Lumber Wizard for the list): https://gist.github.com/: 100MB Requires member (Free) https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$) https://hastebin.com/: 400KB Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads. What to provide: ...for Crashes and Runtime issues: Minecraft 1.14.4 and newer: Post debug.log Older versions: Please update... ...for Installer Issues: Post your installer log, found in the same place you ran the installer This log will be called either installer.log or named the same as the installer but with .log on the end Note for Windows users: Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension Where to get it: Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs. Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch: Spoiler Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge) Make a launcher profile targeting this version of Forge. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it). Now launch the pack through that profile and follow the "Mojang Launcher" instructions above. Video: Spoiler or alternately, Fallback ("No logs are generated"): If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft Server Not Starting: Spoiler If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output. Reporting Illegal/Inappropriate Adfocus Ads: Spoiler Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad. Lex will need the Ad ID contained in that URL to report it to Adfocus' support team. Posting your mod as a GitHub Repo: Spoiler When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub. When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository. Open a command prompt (CMD, Powershell, Terminal, etc). Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in). Run the following commands: git init git remote add origin [Your Repository's URL] In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git git fetch git checkout --track origin/master git stage * git commit -m "[Your commit message]" git push Navigate to GitHub and you should now see most of the files. note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from) Now you can share your GitHub link with those who you are asking for help. [Workaround line, please ignore]
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.