Jump to content

Recommended Posts

Posted (edited)

I have my mod I'm working on but I'm going traveling and want to keep working on it. However I do not want to do the setup process on my laptop, is there something I can do to just put the files on my laptop(through GitHub) and then be able to work on my mod while being able to test it? btw I'm on 1.12.2 and the main part I want to skip is installing forge and the command terminal

Edited by Blue_Atlas
Posted

No, just run the setup. The files that the process makes/edits are illegal to redistribute {they are owned by Mojang} so there is no legitimate way to transfer them anywhere else. There is a reason why we go through the complicated setup.

I do Forge for free, however the servers to run it arn't free, so anything is appreciated.
Consider supporting the team on Patreon

Posted

Yes. Make a batch file.

Stop complaining about it. 

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable.  If you think this is the case, JUST REPORT ME.  Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

 

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

 

DO NOT PM ME WITH PROBLEMS. No help will be given.

Posted (edited)

alright, let me rephrase my question now that I know more, if I copy my whole directory via GitHub what do I need to do to set up a new one on a different computer without any part installed to begin with?

Edited by Blue_Atlas
Posted

If you put your mod source on GitHub using the gitignore supplied in the MDK the only requirement on the other side is a JDK and some time for the sources to be re-generated, and your IDE of choice, obviously.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted

I'm sorry but I am still confused. What steps of setup do I need to do on my laptop if I already have eclipse installed but don't have anything else there that I need before I can copy my directory over and have it run properly?

Posted (edited)

 

 

2 hours ago, Blue_Atlas said:

I'm sorry but I am still confused. What steps of setup do I need to do on my laptop if I already have eclipse installed but don't have anything else there that I need before I can copy my directory over and have it run properly?

 

1. Transfer the work dir to your laptop. 

2. add apply plugin: 'eclipse' to your build.gradle file just below apply plugin: 'net.minecraftforge.gradle.forge'(note 1.12.2 only)

2. on the laptop you need to rebuild the eclipes paths. 

gradlew cleanEclipse and then gradlew eclipse 

3.Make the gradlew genEclipseRuns you may need to delete the old server and client.launch before ruining this. (note this only works on the 1.13.2 if your on 1.12.2 you need to use gradlew runClient command to start your game  ) 

this will let your laptop skip the heavy lifting of the build.

Edited by JavaMan7
Deleating .gitignore is not the best thing to do. And you should not use github like dropbox
Posted
24 minutes ago, JavaMan7 said:

delete  .gitigore

Don't do this.

 

What exactly are you trying to skip here?

Do you want to skip the decomp and deobf time or are you going somewhere without internet?

 

The Forge MDK uses a Gradle wrapper (Batch and Shell scripts combined with a Jar file, allowing Gradle to bootstrap itself on any system with a JDK installed).

As long as you have a JDK installed that the included Gradle Wrapper can use (along with an internet connection to allow Forge to fetch all the dependencies), you'll be fine.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted (edited)

I don't have command terminal access as far as I know and getting the setup files on my laptop is tricky, so I'm trying not to use the terminal and only put files on through GitHub if possible.

Edited by Blue_Atlas
Posted

Why would you not have access to cmd or terminal on your machine?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted

It seems a bit sketchy, is the laptop yours, borrowed, or does it have parental controls or some such turned on?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted (edited)

The code on GitHub is only your mod’s code. None of the required libraries or the prerequisites for launching minecraft + the mod are on the mod’s GitHub. The gradle tasks downloads and sets up the environment for you to make the mod. IntelliJ has an integrated terminal, you could run the setup tasks from a script or you could theoretically do the entire setup from single user mode. The setup tasks are necessary to develop a mod. 

Edited by Cadiboo
Setups -> sets up

About Me

Spoiler

My Discord - Cadiboo#8887

My WebsiteCadiboo.github.io

My ModsCadiboo.github.io/projects

My TutorialsCadiboo.github.io/tutorials

Versions below 1.14.4 are no longer supported on this forum. Use the latest version to receive support.

When asking support remember to include all relevant log files (logs are found in .minecraft/logs/), code if applicable and screenshots if possible.

Only download mods from trusted sites like CurseForge (minecraft.curseforge.com). A list of bad sites can be found here, with more information available at stopmodreposts.org

Edit your own signature at www.minecraftforge.net/forum/settings/signature/ (Make sure to check its compatibility with the Dark Theme)

Posted

as far as I know I can access the terminal but it may be on some form of restrictions, so if I can get a working workspace without having to use the terminal it would be nice

Posted

AFAIK you need access to the command line in order to setup, test, git commit, and build your mod.

You really should find a way to gain access to the command line, or developing mod would be very (and unnecessarily) difficult.

Some tips:

Spoiler

Modder Support:

Spoiler

1. Do not follow tutorials on YouTube, especially TechnoVision (previously called Loremaster) and HarryTalks, due to their promotion of bad practice and usage of outdated code.

2. Always post your code.

3. Never copy and paste code. You won't learn anything from doing that.

4. 

Quote

Programming via Eclipse's hotfixes will get you nowhere

5. Learn to use your IDE, especially the debugger.

6.

Quote

The "picture that's worth 1000 words" only works if there's an obvious problem or a freehand red circle around it.

Support & Bug Reports:

Spoiler

1. Read the EAQ before asking for help. Remember to provide the appropriate log(s).

2. Versions below 1.11 are no longer supported due to their age. Update to a modern version of Minecraft to receive support.

 

 

Posted
12 hours ago, Blue_Atlas said:

does it matter why I might not have access to the command terminal?

Batch files.

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable.  If you think this is the case, JUST REPORT ME.  Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

 

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

 

DO NOT PM ME WITH PROBLEMS. No help will be given.

Posted

Your command prompt/terminal's working directory needs to be the root directory of your mod source(i.e. where gradlew and gradlew.bat are) for that to work.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Posted

Windows, Mac, or Linux?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • It is 1.12.2 - I have no idea if there is a 1.12 pack
    • Okay, but does the modpack works with 1.12 or just with 1.12.2, because I need the Forge client specifically for Minecraft 1.12, not 1.12.2
    • Version 1.19 - Forge 41.0.63 I want to create a wolf entity that I can ride, so far it seems to be working, but the problem is that when I get on the wolf, I can’t control it. I then discovered that the issue is that the server doesn’t detect that I’m riding the wolf, so I’m struggling with synchronization. However, it seems to not be working properly. As I understand it, the server receives the packet but doesn’t register it correctly. I’m a bit new to Java, and I’ll try to provide all the relevant code and prints *The comments and prints are translated by chatgpt since they were originally in Spanish* Thank you very much in advance No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. No player is mounted, or the passenger is not a player. MountableWolfEntity package com.vals.valscraft.entity; import com.vals.valscraft.network.MountSyncPacket; import com.vals.valscraft.network.NetworkHandler; import net.minecraft.client.Minecraft; import net.minecraft.network.syncher.EntityDataAccessor; import net.minecraft.network.syncher.EntityDataSerializers; import net.minecraft.network.syncher.SynchedEntityData; import net.minecraft.server.MinecraftServer; import net.minecraft.server.level.ServerPlayer; import net.minecraft.world.entity.EntityType; import net.minecraft.world.entity.Mob; import net.minecraft.world.entity.ai.attributes.AttributeSupplier; import net.minecraft.world.entity.ai.attributes.Attributes; import net.minecraft.world.entity.animal.Wolf; import net.minecraft.world.entity.player.Player; import net.minecraft.world.entity.Entity; import net.minecraft.world.InteractionHand; import net.minecraft.world.InteractionResult; import net.minecraft.world.item.ItemStack; import net.minecraft.world.item.Items; import net.minecraft.world.level.Level; import net.minecraft.world.phys.Vec3; import net.minecraftforge.event.TickEvent; import net.minecraftforge.eventbus.api.SubscribeEvent; import net.minecraftforge.network.PacketDistributor; public class MountableWolfEntity extends Wolf { private boolean hasSaddle; private static final EntityDataAccessor<Byte> DATA_ID_FLAGS = SynchedEntityData.defineId(MountableWolfEntity.class, EntityDataSerializers.BYTE); public MountableWolfEntity(EntityType<? extends Wolf> type, Level level) { super(type, level); this.hasSaddle = false; } @Override protected void defineSynchedData() { super.defineSynchedData(); this.entityData.define(DATA_ID_FLAGS, (byte)0); } public static AttributeSupplier.Builder createAttributes() { return Wolf.createAttributes() .add(Attributes.MAX_HEALTH, 20.0) .add(Attributes.MOVEMENT_SPEED, 0.3); } @Override public InteractionResult mobInteract(Player player, InteractionHand hand) { ItemStack itemstack = player.getItemInHand(hand); if (itemstack.getItem() == Items.SADDLE && !this.hasSaddle()) { if (!player.isCreative()) { itemstack.shrink(1); } this.setSaddle(true); return InteractionResult.SUCCESS; } else if (!level.isClientSide && this.hasSaddle()) { player.startRiding(this); MountSyncPacket packet = new MountSyncPacket(true); // 'true' means the player is mounted NetworkHandler.CHANNEL.sendToServer(packet); // Ensure the server handles the packet return InteractionResult.SUCCESS; } return InteractionResult.PASS; } @Override public void travel(Vec3 travelVector) { if (this.isVehicle() && this.getControllingPassenger() instanceof Player) { System.out.println("The wolf has a passenger."); System.out.println("The passenger is a player."); Player player = (Player) this.getControllingPassenger(); // Ensure the player is the controller this.setYRot(player.getYRot()); this.yRotO = this.getYRot(); this.setXRot(player.getXRot() * 0.5F); this.setRot(this.getYRot(), this.getXRot()); this.yBodyRot = this.getYRot(); this.yHeadRot = this.yBodyRot; float forward = player.zza; float strafe = player.xxa; if (forward <= 0.0F) { forward *= 0.25F; } this.flyingSpeed = this.getSpeed() * 0.1F; this.setSpeed((float) this.getAttributeValue(Attributes.MOVEMENT_SPEED) * 1.5F); this.setDeltaMovement(new Vec3(strafe, travelVector.y, forward).scale(this.getSpeed())); this.calculateEntityAnimation(this, false); } else { // The wolf does not have a passenger or the passenger is not a player System.out.println("No player is mounted, or the passenger is not a player."); super.travel(travelVector); } } public boolean hasSaddle() { return this.hasSaddle; } public void setSaddle(boolean hasSaddle) { this.hasSaddle = hasSaddle; } @Override protected void dropEquipment() { super.dropEquipment(); if (this.hasSaddle()) { this.spawnAtLocation(Items.SADDLE); this.setSaddle(false); } } @SubscribeEvent public static void onServerTick(TickEvent.ServerTickEvent event) { if (event.phase == TickEvent.Phase.START) { MinecraftServer server = net.minecraftforge.server.ServerLifecycleHooks.getCurrentServer(); if (server != null) { for (ServerPlayer player : server.getPlayerList().getPlayers()) { if (player.isPassenger() && player.getVehicle() instanceof MountableWolfEntity) { MountableWolfEntity wolf = (MountableWolfEntity) player.getVehicle(); System.out.println("Tick: " + player.getName().getString() + " is correctly mounted on " + wolf); } } } } } private boolean lastMountedState = false; @Override public void tick() { super.tick(); if (!this.level.isClientSide) { // Only on the server boolean isMounted = this.isVehicle() && this.getControllingPassenger() instanceof Player; // Only print if the state changed if (isMounted != lastMountedState) { if (isMounted) { Player player = (Player) this.getControllingPassenger(); // Verify the passenger is a player System.out.println("Server: Player " + player.getName().getString() + " is now mounted."); } else { System.out.println("Server: The wolf no longer has a passenger."); } lastMountedState = isMounted; } } } @Override public void addPassenger(Entity passenger) { super.addPassenger(passenger); if (passenger instanceof Player) { Player player = (Player) passenger; if (!this.level.isClientSide && player instanceof ServerPlayer) { // Send the packet to the server to indicate the player is mounted NetworkHandler.CHANNEL.send(PacketDistributor.PLAYER.with(() -> (ServerPlayer) player), new MountSyncPacket(true)); } } } @Override public void removePassenger(Entity passenger) { super.removePassenger(passenger); if (passenger instanceof Player) { Player player = (Player) passenger; if (!this.level.isClientSide && player instanceof ServerPlayer) { // Send the packet to the server to indicate the player is no longer mounted NetworkHandler.CHANNEL.send(PacketDistributor.PLAYER.with(() -> (ServerPlayer) player), new MountSyncPacket(false)); } } } @Override public boolean isControlledByLocalInstance() { Entity entity = this.getControllingPassenger(); return entity instanceof Player; } @Override public void positionRider(Entity passenger) { if (this.hasPassenger(passenger)) { double xOffset = Math.cos(Math.toRadians(this.getYRot() + 90)) * 0.4; double zOffset = Math.sin(Math.toRadians(this.getYRot() + 90)) * 0.4; passenger.setPos(this.getX() + xOffset, this.getY() + this.getPassengersRidingOffset() + passenger.getMyRidingOffset(), this.getZ() + zOffset); } } } MountSyncPacket package com.vals.valscraft.network; import com.vals.valscraft.entity.MountableWolfEntity; import net.minecraft.network.FriendlyByteBuf; import net.minecraft.server.level.ServerLevel; import net.minecraft.server.level.ServerPlayer; import net.minecraft.world.entity.Entity; import net.minecraft.world.entity.player.Player; import net.minecraftforge.network.NetworkEvent; import java.util.function.Supplier; public class MountSyncPacket { private final boolean isMounted; public MountSyncPacket(boolean isMounted) { this.isMounted = isMounted; } public void encode(FriendlyByteBuf buffer) { buffer.writeBoolean(isMounted); } public static MountSyncPacket decode(FriendlyByteBuf buffer) { return new MountSyncPacket(buffer.readBoolean()); } public void handle(NetworkEvent.Context context) { context.enqueueWork(() -> { ServerPlayer player = context.getSender(); // Get the player from the context if (player != null) { // Verifies if the player has dismounted if (!isMounted) { Entity vehicle = player.getVehicle(); if (vehicle instanceof MountableWolfEntity wolf) { // Logic to remove the player as a passenger wolf.removePassenger(player); System.out.println("Server: Player " + player.getName().getString() + " is no longer mounted."); } } } }); context.setPacketHandled(true); // Marks the packet as handled } } networkHandler package com.vals.valscraft.network; import com.vals.valscraft.valscraft; import net.minecraft.resources.ResourceLocation; import net.minecraftforge.network.NetworkRegistry; import net.minecraftforge.network.simple.SimpleChannel; import net.minecraftforge.network.NetworkEvent; import java.util.function.Supplier; public class NetworkHandler { private static final String PROTOCOL_VERSION = "1"; public static final SimpleChannel CHANNEL = NetworkRegistry.newSimpleChannel( new ResourceLocation(valscraft.MODID, "main"), () -> PROTOCOL_VERSION, PROTOCOL_VERSION::equals, PROTOCOL_VERSION::equals ); public static void init() { int packetId = 0; // Register the mount synchronization packet CHANNEL.registerMessage( packetId++, MountSyncPacket.class, MountSyncPacket::encode, MountSyncPacket::decode, (msg, context) -> msg.handle(context.get()) // Get the context with context.get() ); } }  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.